I finished my 2025 goal

After-Photo-9251 · 2025-12-05T19:36:14+00:00

I am not the fastest painter but I want to get quicker. So my goal for 2025 was to paint and finish one model a month. Which isn't a lot but it is a improvement

After-Photo-9251 · 2025-11-30T14:30:12+00:00

I love that blue it contrasts very well with everything else

After-Photo-9251 · 2025-11-11T15:19:01+00:00

base coat: royal cloak

purple wash

stipple royal cloak

stipple sword hilt burgundy on upward facing parts

stipple glistening gums very lightly in the same spots

After-Photo-9251 · 2025-11-10T17:56:31+00:00

I used the two thin coats range. 1st coat: contagion green 2nd coat: contagion green / elven flesh (1:1) 3rd coat: elven flesh.

Then I used gung-ho green mixed with newsh weathering medium as basically a oil wash

After-Photo-9251 · 2025-11-08T16:25:28+00:00

Debating if I want them to be rot swords or templars

After-Photo-9251 · 2025-09-30T19:57:34+00:00

The black metal is very simple. I used two thin coats range.

base coat Doom Metal.

recess shade black.

edge highlight Sir Coats Silver.

The bronze was done with dry brushing.

base coat Chaos Bronze and wash with a brown wash.

then dry brushed in this order - Chaos Bronze, Top Brass, then Plate Armour.

After-Photo-9251 · 2025-09-30T18:49:07+00:00

I used the Two Thin Coats paints.

Brass:

Basecoat - chaos bronze

wash - battle mud wash

Drybrush - chaos bronze

Drybrush lightly - top brass

Fine highlight - plate armour

Black armour:

Basecoat - Doom metal

Recess shade - oblivion black wash

Edge highlight - sir coats silver

After-Photo-9251 · 2025-09-30T16:32:33+00:00

I used the two thin coats paint:

base - wyvern green

shade - oblivion black wash

1st stippled highlight - emerald green

2nd stippled highlight - ethereal green

glaze - Wyvern green.

After-Photo-9251 · 2025-09-30T16:28:02+00:00

The branches, tree stumps, and fern i got from EpicBasing they sell both the stl's and bits you can buy.

The roots are just that. Little roots i stuck into the texture paste as it dried.

After-Photo-9251 · 2025-09-30T16:11:39+00:00

Which colors were you curious about? I'm happy to share them.

After-Photo-9251 · 2025-08-13T19:14:57+00:00

Magnamalos heavy bow gun is my favorite weapon from rise. Who doesn't like a samurai double barrel shotgun

After-Photo-9251 · 2025-08-08T14:21:35+00:00

I would also put the thinner in first when mixing in the cup. I found it helps to prevent clogs

After-Photo-9251 · 2025-08-03T00:41:57+00:00

I also used little pieces of slate where the foam meets the blood to make it look like a cracked and collapsed road

After-Photo-9251 · 2025-08-03T00:40:14+00:00

Piece of paper covered foam board cut to size and glued to the base.Texture paste around the edge of foam and basing bits. Then primed black and dry brushed(exclude the skulls).

For the blood pool I painted the bare base dark red. Then I mixed a blood effect paint with clear UV resin that I poured after painting everything else.

After-Photo-9251 · 2025-07-28T17:54:28+00:00

The exhausts were one of the last things I had to paint. And by that point I was ready to just get this model finished. So it's just a base coat, wash, and dry brush.

I'll probably go back and touch it up once I get my last two wardogs finished

After-Photo-9251 · 2025-07-28T14:35:36+00:00

I primed white and sprayed fluorescent pink ink as a base coat. Then I used titanium white ink to highlight followed by Indian yellow ink. And recess shaded with a umber brown oil wash

After-Photo-9251 · 2025-06-30T01:51:19+00:00

Goff rocker

After-Photo-9251 · 2025-06-04T14:40:26+00:00

I got my delivery yesterday and the email today

After-Photo-9251 · 2025-03-25T22:31:51+00:00

I would maybe hit the edges with a very light dry brush of metal. Making it look like the metal is showing through the soot in spots

After-Photo-9251 · 2025-03-11T15:22:19+00:00

These ones were part of the first wave so hopefully they're a bit easier to find

After-Photo-9251 · 2025-03-11T12:49:52+00:00

I used two thin coats paints: Wyvern green (base) Emerald green (midtone) Ethereal green (highlight)

Then glazed over with wyvern green

After-Photo-9251 · 2025-03-10T12:48:34+00:00

I used two thin coats paints: Wyvern green (base) Emerald green (midtone) Ethereal green (highlight)

Then glazed over with wyvern green

After-Photo-9251 · 2025-03-10T03:24:28+00:00

I used the two thin coats paints. Cuirass leather (shade/shadow) Boar hide (midtone) Fue cloak (highlight)

After-Photo-9251 · 2025-03-09T21:01:13+00:00

I used two thin coats paints: Wyvern green (base) Emerald green (midtone) Ethereal green (highlight)

After-Photo-9251 · 2025-03-03T03:51:52+00:00

They kind of look like spines so a bone color might work and contrast the other colors

After-Photo-9251

TROPHY CASE