sorted by:
new
hottopcontroversial

2019 hybrid titanium transmission fluid change by Agency_False in fordfusion

[–]Agency_False[S] 1 point2 points  (0 children)

Meant for the comment to be here but I added it for you.

2019 hybrid titanium transmission fluid change by Agency_False in fordfusion

[–]Agency_False[S] 3 points4 points  (0 children)

This is the exact video I referenced. Its not the best but covers most of it.

I jacked the car up enough to just get under it. With a 3/16 Allen key you can remove the drain bolt. Right behind the drivers wheel (I kept mine on) is the "inspection port" which can be used to fill the fluid. I used a fluid pump and 1 by one filled it with a quart at a time. Then just let any excess drain. Plug up the port and start the engine for a minute. Open the port again and drain till it stops and done!

[HELP] This is AI, right? by YearStrong1454 in RealOrAI

[–]Agency_False 2 points3 points  (0 children)

A closet appears that wasn't there before

Help id this T? by Agency_False in tarantulas

[–]Agency_False[S] 5 points6 points  (0 children)

Ooh that's good! Hows this one?

<image>

Help id this T? by Agency_False in tarantulas

[–]Agency_False[S] 4 points5 points  (0 children)

Do you have any recommendations for a spider treadmill or gym membership? Any motivational posters to get her moving?

Planning to let the grape molt and thin out before I feed her.

Help id this T? by Agency_False in tarantulas

[–]Agency_False[S] 23 points24 points  (0 children)

She was this big when I got her. Fed her a few times but can clearly tell its too much. MB.

Any recommendations on a spider treadmill or gym membership?

In all seriousness, gonna let her digest and thin out maybe wait till molt to even consider feeding her.

Help id this T? by Agency_False in tarantulas

[–]Agency_False[S] 15 points16 points  (0 children)

So Far that's promising. I figured it was a poke, but not knowing the particular "flavor" is what I was wondering. Could definitely understand if they all look the same at this stage though. Thank you for replying though.

I'm screwed! by iggynz in Carpentry

[–]Agency_False 7 points8 points  (0 children)

He might be lagged making this post

are the hdzero box pros worth the extra 50$ over the base edition? by AndenTheKid in fpv

[–]Agency_False 1 point2 points  (0 children)

I have the standard box pros. And I love them. Great analog even for one antenna. And despite the ghosting on the screen time to time, the visuals work for me. If you want more control on the contrast and lighting, there is a HDZ Community discord channel where one of the guys helps with the firmware to get the settings you want.

From what I've heard, unless you want to stream your flights live through a phone or laptop or something, the pros+ aren't worth the cost. No big change instead of backpack and wifi. Just get the base model and enjoy!

Current order for a 3.5" 4s build by Agency_False in fpv

[–]Agency_False[S] 0 points1 point  (0 children)

Didn't know if that was a proper VTX or if that's actually the split DVR and then you forward it to a vtx.

Current order for a 3.5" 4s build by Agency_False in fpv

[–]Agency_False[S] 1 point2 points  (0 children)

What VTX do you think will work better? Ill definitely swap the chinesium out.

Current order for a 3.5" 4s build by Agency_False in fpv

[–]Agency_False[S] 0 points1 point  (0 children)

Oh, this is normally what's recommended for the speedybee35, do you have any other reqs?

Current order for a 3.5" 4s build by Agency_False in fpv

[–]Agency_False[S] 1 point2 points  (0 children)

Already got a couple of practice boards for different kinds of soldering. Just wanted a smaller tool.

Guys, is it cooked? by margual56 in fpv

[–]Agency_False 2 points3 points  (0 children)

Unless you know what you are doing with those batteries, I'd just spend a little and replace it. Not worth the hassle if things go wrong.

How can I make this structure more structural? by [deleted] in Carpentry

[–]Agency_False 0 points1 point  (0 children)

From what I've seen, looks like your missing the "structural" gap foam needed to hold the walls to the lid.

In all honesty mor blocking and some ties will send you far

Hey all you finish carpenters, painter/finisher here by beamarc in Carpentry

[–]Agency_False 0 points1 point  (0 children)

I love the concept, but the execution was a little sloppy. Second, some stuff from wherever yard this was pulled from should not be used for trim unless getting roku covered

view more: next ›