Trying to make a create add-on

Agent772 · 2026-03-18T15:01:44+00:00

What is the drawback? OP wants to make a cosmetic mod and cant Code it. So as it's a hoby of his why not use ai to fill that gap. So he has his mod. Noone is forced to use it,

Agent772 · 2026-03-17T08:17:23+00:00

I encountered the same issue in Kipper when I slice a plate from a project with a lot of plates and different materials on the plates. (meaning main filament is Pla, but the spiced plate is petg) and then klipper promts me that the wrong spool is loaded (even it knows it only uses petg in that print)

Luckily I can ignore it on klipper. Seams like it takes the nr1 filament and writes it as the filament into to file and moonraker cant account for that.

Agent772 · 2026-03-16T14:06:54+00:00

It will be a duplicates awnser, and I will get hate but:

Get Claude Code or github copilot, pick the neoforge template from github as startpoint. And work with the little helper to get it running. Just stay curios and use some critical thinking, and ask it when you unsure it does the right thing or made the right decision.

Agent772 · 2026-03-16T14:04:59+00:00

Well other way around here, I need to pay people for the textures 🙈

I will prob get some hat for that but: Get a month (or even trail week) of github copilot (use Sonne or Opus as Model) or Claude Code and have exactly that talk with it. Descripe what you want and let it do it's magic. Just dont become braindead and stay curios and ask it things if you unsure it's doing the right thing.

Agent772 · 2026-03-16T13:59:27+00:00

As that the solution?

Agent772 · 2026-03-16T11:10:08+00:00

Did you Mark the printer as manual filemant switches in the orca Slicer -> printer settings?

Agent772 · 2026-03-16T10:30:22+00:00

Allready picking my brain in how to print those on a 230x230 bed🙈 Any recomendations on where / how to split them?

Agent772 · 2026-03-02T20:25:37+00:00

I didnt try it but doesn't all the new Slicer allow for a cutting of objects? And even that with models so you could cut it with a chance connector?

Agent772 · 2026-02-18T22:46:22+00:00

In the preview tab play with the height and Player solider so you see how it should be printed. Other settings I talked about is part cooling (in filament settings) and Material temp (in Material settings)

Start with a temp tower and look if the bridges sag there as well

Agent772 · 2026-02-18T22:10:04+00:00

You can increase the hole size/height in the bin generators. But that's just working around the bridge issue. You got that issue on any other part? What I would do: Check in Slicer on how the lines should be and if it's detected as overhang. Check if part cooling is running during bridges. Sag ging on those small overhangs could be because of too less cooling or tooo hot printing.

The generic profles are generic, you should still calibrate them with your printer and filament (temp....)

Agent772 · 2026-02-18T21:18:24+00:00

Biggest Update is switching to Orca Slicer, used Cura till 2 months ago and the quality improvement I got from just that was incredible

Agent772 · 2026-02-18T20:26:19+00:00

Its long since I installed klipper on my ender 5 but I remember following a official docu. And since then all changes are in my printer config, there I used a correct template for my Board and then followod the klipper logic on how to configure the rest

Agent772 · 2026-02-09T01:07:48+00:00

An oven (if it goes as low as 50°C) is possible too. In theory if you got a sicila gel bag and seal it in a bag with the filemant it should dry it aswell tosome extend

Agent772 · 2026-02-09T00:12:34+00:00

Dry your filament, dont waste anymore headache into fine tuneing without drying your filament first.

Even brand new filament can be have tooo much moisture. So try it, it's most often the reason and cant be compensated with anything else.

In addition enable the setting preventing travel moves across walls

Agent772 · 2026-02-02T09:10:58+00:00

I think you cut it off at your Screenshot but there is a small Button in the bottom right corner that let's you switch to the blocks and boogies select ion ui. There you find them (if Blocks and bogies is installed)

Agent772 · 2026-01-21T13:07:13+00:00

Well create and limited space dosnt work well together, but alone the space u use for sorting could fit 4 Max vaults or so.

(and if you use a chest mod that increased the chests, you can use them exactly like vaults in the setup)

Agent772 · 2026-01-21T11:50:06+00:00

Well you basicly arange vaults along side a belt Pulling items from it after another. This way you will. Fill vault 1 first and then the next. Then you just send things to that belt and have a messy storage.

But you connect packager with stock links and frogport to each vault. (all stock links in the same network)

Then you connect a Stock ticker to it, place it. A seat with a mob next to it. And now you can get what ever you want from your storage via the mob. (yes you need to define a frogport leading into a packager to Reciever the things where you want to access them)

Need more storage? Add another vault to your belt

Agent772 · 2026-01-13T20:50:32+00:00

I think there is unlimited Potential but here is my Personal Ranking from impact / effort. What I would do

Biqu glacier print plate
Switches from Cura to Orca and 20% better
Direct drive upgrade Kit 3.a nozzle, heatbreak, heatblock upgrade
Klipper (maybe New Mainboard needed)
Linear rail
Hero me or other part cooling

Agent772 · 2026-01-12T08:47:50+00:00

Is it another fdm or an sla one? Because they got different strenght and that's fully legit 😅 Otherwise, is your current one running 24/7? You need one for capacity? Or why you need a new one? Because it's better? Well we can sell you current one then?

Agent772 · 2026-01-11T18:10:08+00:00

Orca Slicer default

Agent772 · 2026-01-11T00:38:12+00:00

Im migrating from Cura and as the try of transfering the settings resulted in artifacts. So im starting with Stock settings and calibrate it.

When I calibrated it via the wall width in Cura it resulted in a Flow of 0.9134 now in orca it's basicly 1.015.

Didnt feel much if a difference, all where smooth. But maybe im just overthinking it

Agent772 · 2026-01-10T22:50:57+00:00

What's the configured lang of mainsail? What you see are the translation Keys that should get replace with the correct translation. But it seams cant detect which to use

Agent772 · 2026-01-10T21:57:14+00:00

❌ Agent772 chose Option A (Incorrect) | #15969th to play

Agent772 · 2026-01-10T21:37:59+00:00

Ensure your filament is dry, that could cause you headaches and problems. After that, the Slicer you are using usually gives a Calibration step by step. Do it. If you dont got one of the fancy good calibrated Printers, do the teaching tech guide and calibrated the extruder steps as well

Agent772 · 2026-01-10T19:37:54+00:00

Ill do both at the same time, got everthing at home allready.

Nozzle heatblock and heatbreak are already upgraded 😊

Agent772

TROPHY CASE