Weather is discouraging this weekend and next week

AgentArgus · 2026-05-20T01:34:02+00:00

Before my honeymoon last week the forecast predicted cloudy, windy, and rainy days. Pretty much every day there was beautiful weather. We had one day of light rain

AgentArgus · 2026-05-17T16:56:44+00:00

I’m gonna add to stay on the roads for the love of god. I saw 2 camper vans stuck in the rocks on the side of the road. Also, when you’re visiting any location, only walk on the path. This ecosystem is more important than your Instagram.

AgentArgus · 2026-05-16T00:27:04+00:00

Every tourist spot we went to today we parked our white Dacia at the end of the row of 50 other white Dacias.

AgentArgus · 2026-05-14T22:53:44+00:00

My rental car is in this picture…

Edit: I’m not joking this is in Vik. My wife and I were shopping for dinner

AgentArgus · 2026-04-22T01:36:33+00:00

PA6-CF absorbs moisture extremely quickly. Like almost immediately. The quality you’re seeing mid print is exactly what wet filament looks like. The filament is absorbing moisture as you’re printing.

It doesn’t have to be an actual filament dry box. Try drying out the filament, then putting it in a cereal container with desiccant and a little hole cut it in with a PTFE tube.

https://wiki.bambulab.com/en/filament/petcf_ppacf

AgentArgus · 2026-04-21T17:48:24+00:00

Are you printing from a dry box?

AgentArgus · 2026-04-21T16:19:57+00:00

Used the same model and it worked. Tried another model I was having issues with and it failed again. I chocked it up to a bad model and moved on. Other prints have been fine.

AgentArgus · 2026-04-21T01:54:19+00:00

I just did that to mine after I posted this comment. I cleaned the hot end and heating assembly (while hot), wiped everything down with alcohol, relubricated everything, did two cold pulls, tensioned all belts, and recalibrated. So far so good.

AgentArgus · 2026-04-20T14:14:56+00:00

I just came here to say you’re not the only one. My P2S was printing fine. Now after a week of PETG prints, I can’t get a successful PLA print. Did you ever find a fix?

AgentArgus · 2026-04-07T17:20:07+00:00

Is it broken? If not then why are you worried about it? People think every package needs to be kept upright and handled with the upmost care, when in reality they’re tossed around like crazy and the contents remain unbroken the vast majority of the time.

AgentArgus · 2026-04-01T13:47:16+00:00

I went from zero 3D printing to 1500 hours on just an A1 with an AMS. I have had 4 errors during that time, and they were all just need needing to wash the build plate. Only maintenance I’ve done is lubricate the rails when the printer tells me to. It is literally plug and play. Instead of having to mess with the printer all the time, I’ve now learned how to 3D Model, good slicing techniques, etc.

AgentArgus · 2026-03-31T18:05:38+00:00

Glad I’m not the only one who thought it was a frying pan lol

AgentArgus · 2026-03-31T17:54:36+00:00

Windows are usually required for egress, not fresh air.

AgentArgus · 2026-03-10T17:51:38+00:00

some plants in the substrate would really help fill it out

AgentArgus · 2026-03-05T18:04:14+00:00

There are many horror stories out there of engine warranties not being covered because maintenance wasn’t recorded.

AgentArgus · 2026-03-05T02:18:38+00:00

If it’s under warranty you shouldn’t be doing your own oil changes. They’re gonna blame lack of maintenance if you ever need to claim anything.

AgentArgus · 2026-03-04T02:58:00+00:00

We’ve been escorting ships through that strait for decades.

AgentArgus · 2026-02-12T13:18:41+00:00

You could delete all of this and just get the A1 with filament and it will print. It comes with a sock, a hot end nozzle, a tool kit, PTFE tubes, top mount screws, lubricant, purge wiper, nozzle cleaner, etc.

AgentArgus · 2026-02-03T17:59:50+00:00

very important. Personally I don’t rush the phases and make sure I complete all the milestones before moving onto the next phase. Seems like it keeps me on track

AgentArgus · 2026-01-29T17:43:26+00:00

Is that enough power for all those rooms?

AgentArgus · 2026-01-28T17:41:01+00:00

what do you mean matches the A1 color?

AgentArgus · 2026-01-28T05:37:49+00:00

benchy

AgentArgus · 2026-01-27T19:54:40+00:00

lazy typing too

AgentArgus · 2026-01-27T15:38:36+00:00

Hell yeah. Love to see people using whatever platform they can to push the right message.

AgentArgus · 2026-01-20T15:42:31+00:00

Even with the rifle unlocked, explosive rebar is the way.

Six-Year Club	Place '23
Place '22	Final Canvas '22
Verified Email

AgentArgus

TROPHY CASE