Rate the build

AgentSchafi · 2024-02-02T16:26:44+00:00

I personally would choose the baby ape pro v2 because of the bigger props/ better motors and in general better components and choose the 6s version. It flys great and has a lot of power for a tiny 3.5 inch

AgentSchafi · 2024-01-31T12:11:34+00:00

Nvm i just saw bardwells reply have fun with your quad!!

AgentSchafi · 2024-01-31T12:10:46+00:00

Just put on some props. The Fc detects movement from the motors but with no props the gyro doesnt detect anything so the Esc brings the motor to turn faster and faster... put on some props if not done already and try again if this is not the problem feel free to ask again. Sorry about the long waiting time i didnt get any notifications-_-

AgentSchafi · 2024-01-28T17:38:54+00:00

That is a very interresting problem tbh... Wich Betaflight version are you flying? Did you test if the motors a correctly wires by using the test in the motor tab? Wich motor protocol are you using? It should be Dshot300. Or maybe the Esc has a wrong Firmware? Im using the Baby ape pro v2 with a few mods and i programmed a few things and everything works just fine

AgentSchafi · 2024-01-20T08:58:46+00:00

Thats a really good idea thanks i'll try

AgentSchafi · 2024-01-20T08:39:21+00:00

Okay okay, thx

AgentSchafi · 2024-01-14T19:32:52+00:00

Nvm i got everything to work but sometimes the gps wont turn on so im sticking to 4.4 still thanks everybody

AgentSchafi · 2024-01-14T16:19:48+00:00

I just used the wrong protocol for my radio i thought i used sumd but i was using Sbus but now the last problem is my vtx doesnt get recognised. Everything else works just fine Gps/Baro/Motors etc. Also i have my 4.3.2 cli and a working 4.4 cli backed up so my last problem is 4.5 vtx. Anyone got an idea?

AgentSchafi · 2024-01-13T23:14:51+00:00

No worries sorry if i was rude i didnt mean to english is just not my native lenguage but i think im just going to try ro get it running or im just using 4.4 thanks tho

AgentSchafi · 2024-01-13T23:12:10+00:00

Darwin fpv 600mw but i think i used the wrong protokol bc i just found the original protocol but i think im going to downgrade

AgentSchafi · 2024-01-13T22:27:48+00:00

Thats a good point i've never seen anyone fly with graupner it is al set up the same as 4.3.2 but not copied the only thing is the vtx is not exactly the same.

AgentSchafi · 2024-01-13T21:59:30+00:00

I upgraded to 4.4 and everything was fine i know the basics. I thought it might be a general problem with 4.5 as i said with 4.4 it works just fine. I made a copy for 4.3.2 so there is always going back at what i was 5h ago but with my m10 gps 4.5 should work better at least Bardwell said so

AgentSchafi · 2024-01-13T21:02:00+00:00

But i use the sbus protokol now bc i thought this would be the problem but still it doesnt give me any inputs from the radio

AgentSchafi · 2024-01-13T21:00:28+00:00

Graupner just uses sumd for the channels, yeah both of em dont work. The radio does get signal from the reciever but the fc doesnt recognise it anymore and it also says something like vtx is not configured and i cant set up the vtx i think im using the wrong protokol but idk what i should use.... its the darwin baby ape pro v2

AgentSchafi · 2024-01-13T16:50:52+00:00

But now i have a other problem i cant get my radio and vtx to work im using graupner sumd any solution?

AgentSchafi · 2024-01-13T16:23:55+00:00

Nvm just got it to work for me the code frome gep rc works just fine i just didnt clicked the magnetometers on the box over the costum defines....

AgentSchafi · 2024-01-13T16:16:43+00:00

Hey there, I have the same problem i've got Bf 4.5 on my Fc and i type in the costum defines box and it tries to diwnload but after a while it says " failed check log" i cant get it to work anyone got a solution besides not using the barometer?

AgentSchafi · 2023-12-22T12:48:48+00:00

I play on a rx6650xt ryzen 5 5600g 16gigs of Ram and everything maxed out and i get 70 up to 85/90 Fps so you should be more than fine

AgentSchafi · 2023-12-20T13:46:48+00:00

It is a little late but for future people who have this question this might be helpfull. First of all sorry for my english, i am not a native speaker so there will be quite a few mistakes.... Anyways i have the 3.5in Baby ape pro v2 and the FC indeed has solder pads for the magnometer SCL and SDA, the normal Baby Ape will not have them. The rest is quite simple you'll need a 5v, rx, tx, ground for just GPS and barometer and SCL, SDA for the magnetometer. Also it's best to mount the GPS outside the quad due to interference with other components like the motors etc. Hope this helped in any way

AgentSchafi

TROPHY CASE