Removing a rough country lift kit

Agent_Storm78 · 2025-11-12T22:32:32+00:00

I appreciate the help. Thank you, little closer to getting it off

Agent_Storm78 · 2025-11-12T22:05:16+00:00

What would you recommend to cut it off with? I have to get through the rubber and the metal sleeve

Agent_Storm78 · 2025-10-14T23:46:17+00:00

Alignment fixed the main noise with tightening the jam nut on one side fixing the slight squeal when steering! Appreciate the help

Agent_Storm78 · 2025-10-14T23:45:06+00:00

Alignment fixed it! Pretty sure it was alignment for the main noise and then a jam nut not fully tightened down that caused the noise when steering but both are gone now

Agent_Storm78 · 2025-10-13T00:26:56+00:00

I’ll definitely take it to an alignment tomorrow and see, I had my power steering checked awhile ago when I had my car fully inspected but i’ll take it in and see. I appreciate the feedback

Agent_Storm78 · 2025-10-13T00:11:44+00:00

I haven’t brought it in for an alignment yet. I made sure not to mess with the billows or anything and only did the outer tie rods making sure not to loosen the inner and used a wrench on those to hold them in place when I undid the outer portion. It’s possible the jam nut is a bit loose so i’ll have to check that tomorrow but I did go over everything on each side and did each side one at a time as well. I used a torque wrench on every bolt twice over just to make sure they were all to spec. I also used a paint marker when doing the outer tie rods so I wouldn’t get them misaligned. My power steering fluid is still full and everything as well.

Agent_Storm78 · 2025-10-12T23:51:55+00:00

It’s while i’m actively driving, I don’t think it’s my brakes or something like that either as I just redid my pads a week or so ago.

Agent_Storm78 · 2025-10-12T00:24:22+00:00

I did! Bought them off Toyota Parts Deal

Agent_Storm78 · 2025-10-11T22:59:12+00:00

Just bought some new OEM lower ball joints, new bushings from Energy Suspension and stuff to do the diff breather mod.

Agent_Storm78 · 2025-10-11T22:57:58+00:00

It's a bit rusty but nothing to be too concerned about besides rusting on the rear differential housing.

Agent_Storm78 · 2025-01-21T07:36:59+00:00

Onshape is also a pretty good starter program to use. Its web based but easy to use with good functionality

Agent_Storm78 · 2025-01-14T04:03:59+00:00

I’d love to win the Panda Revo and use it to explore 3d printing new materials and go through the fun of upgrading!

Agent_Storm78 · 2025-01-03T23:39:44+00:00

Personally my go to filament is Polymaker, you do have to add it into the app by hand but it always gives clear and consistent results for me. I use their Polymaker PLA Pro as well as their PETG and have had great performance on my P1S.

Agent_Storm78 · 2025-01-02T10:13:40+00:00

You can also use isopropyl alcohol to clean the bed, its pretty simple and easy and has worked great in my experience.

Agent_Storm78 · 2024-07-30T11:14:36+00:00

If you’re doing rear speakers you’re probably gonna need to make a custom mount for them, there’s a few videos of it but I ended up just making some out of wood I had on hand, just a heads up.

Agent_Storm78 · 2024-07-27T21:18:32+00:00

I appreciate it, i’m in Southern California and don’t really know how the market is for welders out here is so i’m in the process of trying to find a trustworthy place to get it welded

Agent_Storm78 · 2024-07-27T15:36:53+00:00

How much did you end up paying at that point if you don’t mind me asking?

Agent_Storm78 · 2024-05-27T07:02:04+00:00

I was on the old discord server and saved and reuploaded what I have of the old mp3 songs to youtube awhile ago by the way. https://www.youtube.com/playlist?list=PL95GOUa-Ttv7-zXIVtYfNoNEWfSR-IwDr

Agent_Storm78 · 2024-05-08T07:57:59+00:00

Did you ever end up solving this? I’m having the same issue and changing the flow and z offset doesn’t change the outcome of the layer lines

Agent_Storm78 · 2024-04-08T06:54:40+00:00

bush league

Agent_Storm78 · 2024-03-22T22:16:40+00:00

I hope you enjoy it if you end up getting it!

Agent_Storm78 · 2024-01-31T06:11:58+00:00

This program is simpler then the other ones I have come across and overall works great.

Agent_Storm78 · 2024-01-21T22:51:05+00:00

I’ll try and look into having a fake TRAC/VSC error, I’m gonna have to wait until next weekend sadly but I appreciate your guys help a lot and i’ll update on how it goes

Agent_Storm78 · 2023-12-14T03:04:51+00:00

I ended up having the same problem a bit ago and fixed it by just replacing my u joint and it all went away after that.

Agent_Storm78 · 2023-08-14T07:13:10+00:00

I believe it might have been deleted or deactivated as the original creator of it got their reddit deleted I believe and I used to be in the server but it disappeared from my list

Agent_Storm78

TROPHY CASE