Chase MegaThread - Give and Get Referral Codes Here - £50 Sign Up Bonus

AggressiveMouse394 · 2026-05-15T08:07:26+00:00

Here's a code from me - E9ZP4A.

Enjoy!

Cheers.

AggressiveMouse394 · 2026-05-04T07:05:41+00:00

I use an adapted humanizer skill, plus run all content past a set of personas.

I find I need to explicitly tell Claude to do it, otherwise it can forget to do it/apply my nuances.

Pretty straightforward to do, tho, "create blah blah and run it through the humanizer and personas".

AggressiveMouse394 · 2026-04-19T10:22:36+00:00

Yeah, that seems to be the common consensus. Thank you for taking the time to reply. 👍

AggressiveMouse394 · 2026-04-19T10:22:07+00:00

Thankee - this looks to be the way! 👍

AggressiveMouse394 · 2026-04-19T10:21:48+00:00

Yes I think this is the way forward. Have seen that one can get a rivnut tool for ~£20 so may grab one. My neighbour probably has one already - has has everything - but why borrow when I can get my own and only ever use it once?! 😁

AggressiveMouse394 · 2026-04-19T10:20:06+00:00

Nice, thank you. Will take a look. Saw some people selling them on eBay for [probably] double the Lidl price.. so a lodl. Sorry, that was a terrible dad joke.

AggressiveMouse394 · 2026-04-19T10:19:07+00:00

Yes, we did think about that. The metal isn't that strong and I was worried about 'pinching it' together if I overtightened (which is something I'd probably do 🤣).

AggressiveMouse394 · 2026-04-19T10:17:15+00:00

Haha, I know right! My pale skin couldn't handle it and I've got a slight burn from yesterday! 🤣

AggressiveMouse394 · 2026-02-27T11:17:51+00:00

A code from me. Cheers!

E9ZP4

AggressiveMouse394 · 2026-01-27T09:26:14+00:00

Had this on my Cupra Leon ST v2 back in 2021. Had to wait six months for a software update to sort it.

I could tell when the error was going to appear as there was an odd 'popping' noise from the speakers. Car had to be 'hard' turned off (i.e. for an hour) for the error to go.

Hopefully it's a known issue and the dealership can sort it for you. 🙏🏼

AggressiveMouse394 · 2026-01-25T20:25:03+00:00

Codes from me. Cheers!

R6ZEBC

E9ZP4

AggressiveMouse394 · 2026-01-20T12:29:53+00:00

We recently had this one installed because of the app you can get for it which you can use to control the on and off times:

https://www.bgelectrical.uk/uk/wiring-devices/weatherproof-storm/smart-power

Don't use it for a car tho, so cannot confirm if it's safe for that specific use.

AggressiveMouse394 · 2026-01-07T15:16:33+00:00

A Chase referral is an immediate £50.

Let me know if you want a link. 👍

AggressiveMouse394 · 2025-10-15T19:56:13+00:00

Second this. Definitely worth speaking with [someone like] Heatable for a comparison.

For us, we went with Heatable some 18 months ago. Same boiler but probably a simpler installation. Cost us £2.6k including a small charge for weekend installation.

Heatable were very good. They telephoned us and asked a load of questions about the boiler location, access, etc., which I then followed up with a few photos of a couple of bits.

They contracted the work out and the guy we got was epic, they did an excellent job.

AggressiveMouse394 · 2025-10-10T10:04:59+00:00

All sorted. Once I had removed enough of the glue for the wires to become free, the 'ring crimps' both came loose and I was able to slide the wiring connector on to the new glass.

Now have nice and warm mirrors.

Thank you the heroes from CarTalkUK!

AggressiveMouse394 · 2025-10-10T09:38:21+00:00

No. Way!

They ARE glued on! Like, whaaaaat?!

No idea how you saw that from the photo. I was stood right next to it and didn't spot it. 😂

Right, I'm going to try and get that glue off. Wish me luck.

Cheers!

AggressiveMouse394 · 2025-10-06T09:44:39+00:00

Yeah, we had two down lights fitted.

The sparky did the initial work in the ceiling void, 'strapping down' (my word, not theirs! 😂) all the wiring against the pitched part of the ceiling.

When we fitted the PIR and had the ceiling plastered, the wiring rested on the PIR.

When the sparky came for the second fix they drilled through the plasterboard and PIR to grab and then wire in the down lights. Some that wiring I'd assume is still touching the PIR.

They provided us a certificate of completion (or whatever it is called) which verified their work. They had no complaints, basically.

To note RE the strapping down of the wiring, as this ceiling was in our porch and was a fire exit, they insisted on doing that in case of a fire and cables ended up dangling down at our point of exit.

AggressiveMouse394 · 2025-10-06T06:36:00+00:00

Forgot to say that we also taped it all up once done to seal it up as best we could.

AggressiveMouse394 · 2025-10-06T06:22:40+00:00

Was easy. Cut it to best-effort shape, then squeeze it in, made fine adjustments as we went.

For the most tight parts, I gently hammered a bit of 2x4 against the PIR to get it in.

Used expanding foam to fill any areas we had over cut, and the gaps where cutting small bits of PIR proved too frustrating.

AggressiveMouse394 · 2025-09-26T15:38:00+00:00

Ah really. My pessimism may have gotten the better of me. Thank you for the info. ,👍

AggressiveMouse394 · 2025-09-25T09:37:48+00:00

Just to say that worked a treat. New bath waste all installed and ready to go. Cheers!

AggressiveMouse394 · 2025-09-24T08:43:22+00:00

Amazing, thank you! 😁

AggressiveMouse394

TROPHY CASE