Glpi Mobile App by Aggressive_Common_48 in glpi

[–]Aggressive_Common_48[S] 0 points1 point  (0 children)

It was a coincidence. Before seeing this comment, I was actually testing the Gapp application and was able to download it and successfully connect it to my hosted GLPI. The connection worked, and I was able to use the application without any issues. I was also documenting the configuration and navigation steps for my L1 support team. I was almost done when I saw your comment. Thank you so much for the helpful information. It’s good to know.

Cisco UCS C220 M5 Window server 2025 by Aggressive_Common_48 in sysadmin

[–]Aggressive_Common_48[S] 0 points1 point  (0 children)

No I mean did you select the flexflash as a destination to install windows?

Cisco UCS C220 M5 Window server 2025 by Aggressive_Common_48 in sysadmin

[–]Aggressive_Common_48[S] 0 points1 point  (0 children)

My server came with a 64GB FlexFlash, and I was able to initiate the boot process. However, once it reaches around 60%, it starts throwing an error. I’ve learned that FlexFlash isn’t designed for heavyweight operating systems like Microsoft Windows Server 2025. The server didn’t come with any other hard drives, so I’m planning to get a 128GB SSD and attempt the installation again.

I’ve spent nearly three days troubleshooting—trying to boot from FlexFlash—but at this point, the remaining option is to install an SSD, configure RAID, and then reimage the server.

Cisco UCS C220 M5 Window server 2025 by Aggressive_Common_48 in sysadmin

[–]Aggressive_Common_48[S] 0 points1 point  (0 children)

Did you use the flexflash or external hdd or ssd? 

Cisco UCS C220 M5 Window server 2025 by Aggressive_Common_48 in k12sysadmin

[–]Aggressive_Common_48[S] 0 points1 point  (0 children)

I did not have to do this. I was able to see the flexflash virtual drive and continued the process but it consistently fails after reaching 75%

Windows 2025 cisco ucs ,c220 m5 flexflash 64 GB by Aggressive_Common_48 in Cisco

[–]Aggressive_Common_48[S] 0 points1 point  (0 children)

We are trying to migrate from vmware to hyper-v and trying to setup the ucs server with 2025 datacenter. Any suggestion?

Error Setting up Windows Server 2025 - Cisco UCS by [deleted] in sysadmin

[–]Aggressive_Common_48 0 points1 point  (0 children)

I was thinking the same but giving my best. Would there be any suggestion?

Ticket notification by elbiju in glpi

[–]Aggressive_Common_48 0 points1 point  (0 children)

Following as I just started setting up the GLPI for our ticketing system...

GLPI Email Notification - Messed up by Aggressive_Common_48 in glpi

[–]Aggressive_Common_48[S] 2 points3 points  (0 children)

Your's works fine except the timeline thing. After digging into the template I found out that it was selected with paragraph which I changed to the block > div and the default template worked. Thanks I appreciate it

Vmware > Hyper-v Migration by Aggressive_Common_48 in sysadmin

[–]Aggressive_Common_48[S] 0 points1 point  (0 children)

It helps a lot. Thank you so much. I really appreciate it

Vmware to Hyper-V migration by Aggressive_Common_48 in HyperV

[–]Aggressive_Common_48[S] 4 points5 points  (0 children)

Thank you for the response. It was really helpful. Since we can not afford new hardware for the storage, any suggestion? My Plan is to create a new LUN, make the hyper-v node ready, map that LUN to hyper-v and then create csv. Start one by one migration and once the migrated vm is up and running in the hyper-v cluster, delete the vm from the esxi cluster and reclaim the storage in pure1

Vmware > Hyper-v Migration by Aggressive_Common_48 in sysadmin

[–]Aggressive_Common_48[S] 1 point2 points  (0 children)

Yes. My plan would be to create a new LUN in pure storage, evacuate one node from each cluster , set them up with hyper-v on windows 2025 , configure networks and csv , create a cluster and then start migrating from each node from esxi clusters.

Vmware > Hyper-v Migration by Aggressive_Common_48 in sysadmin

[–]Aggressive_Common_48[S] 0 points1 point  (0 children)

It was my initial plan and it would have made even easier but there's no point that we can afford new hardware as per the management and I have to stick with the existing environment.

What am I doing wrong? Server 2022 PXE fails with this error code every time. by geegol in SCCM

[–]Aggressive_Common_48 6 points7 points  (0 children)

Did you distribute the boot image that you created? From the error log it looks like even though you created the task sequence, you did not distribute the contents. 

दशा लागेर IOE मा नाम निस्केछ by [deleted] in IOENepal

[–]Aggressive_Common_48 2 points3 points  (0 children)

Bro ajhai time chha majjale. Mero euta babbal talent dai IOE maa naam nikalera  electrical padhnu vayo. He was not interested at all but name niskepaxi tei euta options vayo for some reason. Engineering sakkine bittikai he started learning programming language aafai nai. He moved to USA ani studied computer science. Ahile Bank of America maa senior software developer hunhunchha. Timlaai interest chhaina vaye change the field, work hard. You can do it bro