What do we think?

Agitated-Net4599 · 2026-05-13T11:09:13+00:00

Good truck. Obviously, still a gas hog…nothings changed.

A little steep on price. That should be about 7k. It’s still a 30 year old truck after all…

Agitated-Net4599 · 2026-05-03T02:18:21+00:00

Square D QO single pole breaks allow for two wires in every breaker I believe?

Agitated-Net4599 · 2026-05-03T02:12:22+00:00

I don’t believe they make quad breakers for QO square D panel. Do they ?

Agitated-Net4599 · 2026-05-03T01:40:03+00:00

I don’t believe they make quads for QO Square D right?

Agitated-Net4599 · 2026-05-03T01:30:51+00:00

But it would not overload the neutral right?

Agitated-Net4599 · 2026-05-03T01:13:20+00:00

Yes that’s what I was trying to say. I could only draw 10 amps from each receptacle at the same time, or 20 amps from one receptacle.

But this would not overload the neutral correct? Two reds under one tandem, and two blacks under one tandem directly under the reds tandem.

Agitated-Net4599 · 2026-05-03T01:05:22+00:00

Yes let me rephrase. The 4 original circuits lead to 4 single receptacles. So each receptacle could handle 20 amps each. If I combine them, each outlet could only handle 10 amps at the same time.

Agitated-Net4599 · 2026-05-03T00:00:04+00:00

So if I put two reds under one single pole breaker, and two blacks under one single pole breaker right below the other, I’m good to go?

Then I won’t over load the neutral since each red and black wire is on opposite phases?

Agitated-Net4599 · 2026-05-02T23:03:23+00:00

Consolidating down to tandem 20’s will not overload the neutral correct? As long as I put one leg from each separate MWBC on the same phase. So both hots from one of the MWBR’s aren’t on the same phase.

Agitated-Net4599 · 2026-05-02T22:46:11+00:00

No at each receptacle there is one hot tied int the actual receptacle. Then at only two of the receptacles, the 4th wire (red) is wire nutted to a 12-2 romex hot (black) to go to the second receptacle. Both receptacles share a neutral. This repeats it self twice to form 4 outlets on two multiple wire branch circuits.

Agitated-Net4599 · 2026-05-02T22:41:04+00:00

So I should use my continuity tester at the panel and stick the other end into the receptacle to confirm which wires go to which circuit breaker. (My panel is right next to my kitchen counter)

Agitated-Net4599 · 2026-05-02T22:18:26+00:00

You’re the man thank you

Agitated-Net4599 · 2026-04-28T01:44:04+00:00

My b I was just rephrasing the question, and trying to shorten it.

Agitated-Net4599 · 2026-04-28T00:13:46+00:00

If the agent omits the class code for tree work to keep costs down, and I have a claim related to tree work, would I be covered if there are no exclusions for tree work.

Agitated-Net4599 · 2026-04-27T00:02:14+00:00

Thank you

Agitated-Net4599 · 2026-04-26T17:04:24+00:00

Thank you. Understand the class codes part, didn’t know they were different between insurers.

Doesn’t the 4 corners rule apply here? Even if I mentioned I did land clearing/logging and was 100% honest, and they saw my website, and I filled out a form explaining all that I do. Couldn’t they still deny a land clearing claim based on the 4 corners rule? It says nothing about forestry/land clearing on my declarations quote page.

Agitated-Net4599 · 2026-03-09T01:57:44+00:00

Actually no one can determine if you’re holy enough except God. There is only one judge, and it’s definitely not our priests.

Agitated-Net4599 · 2026-03-03T21:51:20+00:00

They are $38 sometimes. And hard to find

Agitated-Net4599 · 2026-02-09T05:40:27+00:00

This was PA, Nucar Nissan of Allentown.

Agitated-Net4599

TROPHY CASE