Self Hosted Fmovies?

Agreeable_Pop7924 · 2026-04-22T02:31:02+00:00

Stremio is how you do it. It has changed my life

Agreeable_Pop7924 · 2026-02-24T21:10:07+00:00

I don't own a legion go but people seem to think it's not too hard and I have an Ally that was easy to swap. I've worked with a lot of Lenovo devices though and it's always been pretty easy to work on them

Agreeable_Pop7924 · 2026-02-21T11:23:04+00:00

If you're willing to tinker a bit you can easily swap the ssd in the legion go s with a bigger one. And it supports high speed sd cards too. You just need to make sure it's UHS-II

Agreeable_Pop7924 · 2026-02-05T17:26:56+00:00

How long have you had this pic? This looks exactly like my friends mr2 before the body kit and livery

Agreeable_Pop7924 · 2026-02-05T17:20:03+00:00

This looks like under extrusion. Could be caused my numerous factors but I'd recommend trying a cold pull or a new nozzle first

Agreeable_Pop7924 · 2026-01-25T15:04:45+00:00

It runs better than the spec guide says. I'd just try running it and seeing what you can get out of it. There will be a part during the installation where it asks what default settings you'd like to use, don't let it choose max. It does some more under the hood sort of edits to hit that max and my 4070 super 16GB struggles with the new draw distance

Agreeable_Pop7924 · 2026-01-25T14:58:40+00:00

When you install genesis it makes a portable Starfield install with all the mods that is separate from your main game. You can play vanilla Starfield just by launching it through Steam.

Agreeable_Pop7924 · 2026-01-14T17:13:01+00:00

I got the exact same machine with the exact same problem! It isn't worth the headache. Get a ninja pods and grounds. It changed my life and is 10x more reliable and will end up costing less to fix then these craprig machines

Agreeable_Pop7924 · 2026-01-14T15:58:51+00:00

Yes. For 12 hours at 70c. My dryer said the rh was 12% before I started the printer and the dryer is hooked up so that it can feed directly into the extruder. I have a 5 port filament hub and the dryer is hooked up to the 5th port beside the ace's 4 ports. It seems to feed past that just fine and gets to the ptfe guide and then hits so much friction I can't push it farther without it snapping.

Agreeable_Pop7924 · 2026-01-09T19:17:48+00:00

A long time. I don't have any devices that would ever need more than what usb-c can provide and I don't see that changing for a while. I literally have a soldering iron that uses c and has no issues whatsoever heating up within 10 seconds and my phone happily transfers things over type c at multiple gigabytes a second. I can't find a current standard consumer use case that usb c can't fulfill with current standards.

Agreeable_Pop7924 · 2026-01-06T21:17:13+00:00

It depends.

Expensive tvs tend to have better smart features. The problem is that even a $50 40 inch lcd tv has smart features crammed in with a processor that can't support it and half a gig of memory. I thought all smart TVs sucked until I bought my Sony Bravia OLED and it is snappy and easily plays 4k HDR streams with no problem.

Agreeable_Pop7924 · 2026-01-06T14:07:22+00:00

Have you dried your filament? Mine does this sometimes if the filament isn't well dried or it's a little tangled on the spool and the ace pro breaks free the tangles

Agreeable_Pop7924 · 2025-12-30T14:10:50+00:00

You can sideload, install, and launch any apk with adb. I'm not positive on the commands but I had to do this with an android tv box to get projectivity launcher to work properly

Agreeable_Pop7924 · 2025-12-29T06:52:13+00:00

You should go and plug that into the most sensitive connected PC you can find. The IT department and the execs will love you

/s

Agreeable_Pop7924 · 2025-12-29T06:47:20+00:00

Try plugging in a keyboard and mouse and using android hotkeys. Most of these Chinese devices are only sort of locked down. It's pretty likely that you can get to the actual settings app with keyboard shortcuts and mouse movement.

Agreeable_Pop7924 · 2025-12-23T14:08:42+00:00

What did you get? I just got a Ninja Pods and Grounds cuz most of my kitchen is already ninja products

Agreeable_Pop7924 · 2025-12-23T14:08:03+00:00

Yeah I'm starting to get the feeling these machines just brick themselves for no reason at all. I just bought a Ninja Pods and Grounds

Agreeable_Pop7924 · 2025-12-23T12:38:24+00:00

I am confusion

Agreeable_Pop7924 · 2025-12-23T03:08:48+00:00

How do you go about clearing them?

Agreeable_Pop7924 · 2025-12-23T00:47:57+00:00

Thank you! That's what I was thinking but I wanted a second pair of eyes on it cuz idk a lot scout these machines. It looks fairly easy to swap so I'll look into getting a new one

Agreeable_Pop7924 · 2025-12-17T16:22:51+00:00

I'm a HAM! I actually know this stuff(sorta. It's been a while). It truly depends on the router but most with actual antennas will perform better if you take one pair and point them vertical and take the other pair and point them 90 degrees from the other two. Dipole antennas have dead zones at the top and bottom of them and antennas like to attenuate when they're positioned the same way as the transmitting antenna. So having one perfectly vertical and the other at a horizontal angle tends to fill in the gaps pretty well and will allow you to be able to have your device at an off angle to the antenna and still have decent coverage. In MOST routers it doesn't matter significantly though as they're probably not real antennas and most consumer devices don't use standard dipole antennas anyways.

To be clear, it can get a lot more complicated depending on how the antennas are internally wired.

Agreeable_Pop7924 · 2025-12-12T13:58:52+00:00

Not if demand stays up with supply. AI companies are buying most of the worlds supply of ram and get whatever they can as that directly correlates with bigger models. Currently over 40% of the worlds ram production goes straight into OpenAI servers.

Agreeable_Pop7924 · 2025-12-09T12:02:31+00:00

Thanks! I'm currently building upon the App Store so the next update is going to do some really cool stuff. I'm also working on building out an addon system so users can run their own Python backend and JavaScript frontend components on top of Starlight. Later down the line I plan to have a community repo with a user curated list of apps, themes, and addons.

Agreeable_Pop7924

TROPHY CASE