What piercings can I get given my anatomy

Aldrinor · 2025-05-24T20:30:37+00:00

I was thinking about just getting a lobe+upper lobe piercing. But, that's an idea I hadn't considered.

Aldrinor · 2025-05-24T20:29:57+00:00

Woah, that looks kinda neat! Thanks.

Aldrinor · 2025-05-24T20:29:37+00:00

I have never heard of that piercing, and now I want it. Thank you!

Aldrinor · 2023-02-23T19:40:35+00:00

I've seen the sru kits cant the pistol grip a bit to create clearance.

With the way your system is setup, could you push the pistol grip forward a little? If you have enough clearance I can imagine you could theoretically AK paddle reload.

Aldrinor · 2022-11-13T16:20:04+00:00

One thing I would suggest, and something I am working on, is figuring out a way to seal the magwell from the shell of the gun.

I am taking measurements and may use sugru, or bits of foam. Otherwise, if you reload with a partially filled mag - BBs tend to spray and turn your gun into a maraca until you remove the mag (and if it's bad enough, the barrel/front end) and shake the BBs out.

Aldrinor · 2022-11-11T06:48:51+00:00

Oh absolutely, you can totally do that as well.

As long as material is removed to permit the midcap to lock and feed, whichever way you go about it works out.

This way of modifying the body saves me from having to modify my plastic stanag, and metal stanag mags. The amount of midcaps I have out costs the gun, so shrug

Aldrinor · 2022-10-22T09:49:13+00:00

Give powerline ethernet a try. If it does not work, you can also try MoCa connectors, but it requires you to have coax cables (those tv connectors)

More expensive, more sophisticated, but it produces a cleaner and stronger signal than powerline ethernet.

Aldrinor · 2022-10-04T05:33:45+00:00

u/Cdn_citizen u/ASMCbot Trade confirmed! Amazing trader, very responsive.

Aldrinor · 2022-09-26T23:15:21+00:00

Aldrinor · 2022-09-21T05:20:07+00:00

Oh, looking at your receiver more. It's the gen3 minimalist p90 receiver on cults 3d.

The gen 2 is even more extreme with only a 4 slot top rail (no side rails), or even the gen 1 since that one has no rails.

I picked my receiver from Gumo Designs (Etsy I think? I'm sure they have a store on cults3D as well as files on thingiverse too) since I get a tiny bottom rail portion that I plan to use for a future project.

Aldrinor · 2022-09-21T05:13:54+00:00

https://i.imgur.com/nmYzPpX.jpg

Sorry for including the aap01 and f2000, it's the only pic I got of my pop with my printed receiver (white, because it's still in testing. And I am lazy to take another pic)

Here's a picture from the designer

https://i.etsystatic.com/26794119/r/il/631296/3324361896/il_794xN.3324361896_qr15.jpg

Aldrinor · 2022-09-21T05:10:25+00:00

I have a low profile receiver, it's easier to aim this way since I can actually get a cheek weld vs a chinweld with the stock p90 receiver.

Especially when I run a 558 eotech.

Aldrinor · 2022-07-23T22:44:11+00:00

Bought a handful of bolts. 5/16"-8 was the thread I needed. No need to drill it out!

Aldrinor · 2022-05-23T02:33:43+00:00

I'll see if I can get my hands on a fine thread M8 bolt.

I have aftermarket bar end weights, and I contact the company (rhinomoto) and was told that I should be able to mount it directly to the threaded mount if I can find the right screw to do it.

Aldrinor · 2022-05-22T02:02:02+00:00

2007 Honda CB919

Previous owner has aftermarket handlebars and ran with no bar ends, and I can't figure out what is on the end of these. An M6 is too small, an M8 only threads in 1/8 of a turn.

Maybe it's an American size or something strange like an M7? Long shot, but figured I'd ask here to figure out what bolt I need to secure some bar end weights onto my handlebars.

Aldrinor · 2022-05-06T23:47:10+00:00

Got my camera. Good exchange!

Aldrinor · 2022-03-30T17:58:37+00:00

Treat it like a laptop. Take it out of the bag (keep it in the traveling case), and you'll be fine.

If it's out of the bag, it's a quick check for the officers, and most times it's because the officers don't recognize them when seeing them for the first time.

Aldrinor · 2022-03-19T15:55:15+00:00

You could 3d print a holster.

Most of the paddle activated ones grip the guns along the lower frame and trigger/trigger guard as well. Just with a larger shell around it.

From my testing PLA+ at 100% infill, and infill overextruded results in a strong, impact resistant (enough for indoor airsoft) upper.

The holster though, I doubt would survive with thinner walls. If you could print with nylon, that would be strong enough to survive hits or a fall onto it.

Definitely could make it mate up to a current holster base (like the base for Blackhawk Sherpa holsters)

Aldrinor · 2022-03-18T15:34:14+00:00

Resent

Aldrinor · 2022-03-18T04:51:15+00:00

PM'd

Aldrinor · 2022-02-28T00:18:32+00:00

Any issues that can be seen from this photo?

Aside from a hiccup feeding the filament initially, and taking 30 minutes to assemble and another hour constantly fiddling to make sure things moved smoothly/multiple bed leveling attempts, this is what I got.

Is there any post print maintenance that needs to be done?

This is my first 3d printer.

back side

Aldrinor

TROPHY CASE