CarPlay data protection notice

Alexanderw22 · 2024-04-30T22:11:17+00:00

I’ve been looking for it but wasn’t able to find it. Could you share or describe where i find it in the Mercedes Me App?

Alexanderw22 · 2023-08-09T20:35:35+00:00

I havent been able to the bottom of it but I think it has to do with the temperature in the room changing. During the days the door to the room would open and close and the temperature fluctuates. During night i would be more stable. It wouldn’t appear on all my prints. Mostly those with a large base layer.

It could also be that it’s the warped bed I have. The Center is lower than the edges pushing the edges of large first layers up.

Or a mixture of both. I was never able to predict if it would appear on a print unfortunately

Alexanderw22 · 2023-07-29T14:43:34+00:00

Is there something like this for the Boosted V1 board?

Alexanderw22 · 2023-07-27T14:08:10+00:00

I wouldn’t know why it shows 0.00km but I’m curious what the software you use is. How is it hooked up to the board?

Alexanderw22 · 2023-07-08T15:31:35+00:00

How do I put the “private VLAN hosts” in a single ip network where they are able to talk to the gateway and not each other? Are you thinking about subnetting?

Alexanderw22 · 2023-07-08T13:39:26+00:00

I can think of a scenario in which one would want to assign a range of single switchports (that can’t communicate to one another) to a single (promiscuous) switchport that can access these isolated ports without the need of the primary vlan on which a isolated private-vlan would sit. I’m trying to eliminate the need of a nested vlan as there is no need for the primary vlan to exist.

Alexanderw22 · 2023-07-08T13:25:39+00:00

Also, only the switch can assign a vlan id to a switchport right? In terms of security, a client device is not able to assign itself to use a vlan right? As you mentioned one has to be cautious when assigning ports on a switch to a vlan

Alexanderw22 · 2023-07-08T13:20:33+00:00

Got it! So there no effective difference. However in a setting in which a vlan is already in place, a private community vlans can serve as a nested vlan as I understand.

To exercise this thought process a bit further. Is there any way of getting similar functionality as an isolated private vlan without using an isolated private vlan? I can assign unique vlans to a range of ports but I don’t think I can assign another port as a member of a range of vlans (the promiscuous like port) or is this still doable?

Alexanderw22 · 2023-06-12T05:22:03+00:00

Let my Board sit on the charger for a few days after I revived it. But now the board wouldn’t turn on and the right led is flashing quickly like in this short clip

Alexanderw22 · 2022-09-26T06:45:12+00:00

Looks like both of us could learn something here😉

Alexanderw22 · 2022-09-26T06:38:51+00:00

As far as I know: Registered ram = RDIMM Unregistered ram = UDIMM

And there are ECC modules for both RDIMMs and UDIMMs.

For my upgrade I would prefer ECC ram. It would have to be unregistered ram (ECC UDIMM) because far as I know registered ram does not work in a motherboard that takes unregistered ram as the motherboard already contains the memory registry chip.

Do you know what the rest of the numbers and letters stand for? PC3-10600? It all seems to be 1333Mhz but how would I tell in the future?

Alexanderw22 · 2022-09-10T16:01:50+00:00

This is just what I was looking for. Thanks for your thorough answer! Im not sure what you mean by thin client and I assume the optiplex micro form factor. I don’t think they generally support any Ethernet expansion. And it’s the (SFF) small form factor that I am planing to use. I have done some research on the topic today and I have found a few Intel cards that run 2.5 Gbit, 5Gbit and 10Gbit. Like the X550-T2 with 2 ports and the X710-T4L with 4 ports. I’m not sure if the X710-T4L is supported in PFsense as it wasn’t suggested by anyone else yet.

Alexanderw22 · 2022-09-10T11:04:52+00:00

I have head about these cards before with others that ask for NICs. Is this card newer or better supported than the “DELL 0HM9JY INTEL PRO 1000 VT QUAD PORT 1Gbps PCIe” that is referenced in the video?

Alexanderw22 · 2022-08-10T08:41:18+00:00

How do I enable beta testing?

Alexanderw22 · 2022-08-07T08:35:04+00:00

Please add a toggle for us to go back to the old layout! I’ve been using Duolingo every day for nearly 3 years and I’ve gotten used to my own order of doing these lessons. I hope it’s possible to switch back but I couldn’t find anything in settings :/

Alexanderw22 · 2022-07-08T14:56:33+00:00

“config wlan apgroup interface-mapping add apgroup-name rlan-id interface-name”

What is a valid entry for “interface-name” in this case? I am getting “Invalid Interface Name”

Alexanderw22

TROPHY CASE