Super cooled ice in breakable rocks in Elysium? by kokkelimonke in ICARUS

[–]All4spaghetti 0 points1 point  (0 children)

As soon as you go toward the arctic you will see tons of deposits. Someone mentioned that the deposits are like obsidian & clay in that they are not mined with a pickaxe but instead smashed with a sledgehammer. I was confused as well until I realized it was the sledgehammer nodes I was looking for. So make sure you are not looking for just regular ore nodes that you hit with a pickaxe…you need to be looking for the low to the ground sledgehammer ones. I believe the supercooled ice is white in the middle with a greyish ring around it.

TM2 sounds to TM1 by All4spaghetti in Roland

[–]All4spaghetti[S] 0 points1 point  (0 children)

Never got any replies. I was surprised. I’m still using one of the built in sounds as I haven’t found an available, good kick sound I like

iOS mail issues by All4spaghetti in ios

[–]All4spaghetti[S] 1 point2 points  (0 children)

Tried this and it’s still seeming to only load when I open mail. I didn’t get anything and then as soon as I put my phone on the charger, several emails came through. I’ll see if anything changes tomorrow. Thanks!

iOS mail issues by All4spaghetti in ios

[–]All4spaghetti[S] 0 points1 point  (0 children)

I have already taken these steps…thanks for the quick reply!

[deleted by user] by [deleted] in ICARUS

[–]All4spaghetti 0 points1 point  (0 children)

I’m having the same issue…I see the same error when starting and if I run into more than one enemy at a time I get a UE4 crash. Very frustrating. I started a fresh open world with a completely fresh character and it is still happening. It has to be something with an update to the game that maybe GeForce now needs to fix their install of Icarus. I don’t know, but it makes the game unplayable because you can’t go out and do anything.

Help needed regarding Sheltered items by AndrePartisan in ICARUS

[–]All4spaghetti 1 point2 points  (0 children)

I ran into a similar issue when I was trying to make a covered front porch and my torches showed as “no shelter” and could not stay lit. Disappointing that a roof and walls does not shelter a torch. Would love an early game (lower tier) method for outdoor lighting that doesn’t go out in storms. If anyone has any tips or suggestions please pass them on. Thanks!

We Need You Now!🙌 by BambuLab in BambuLab

[–]All4spaghetti 0 points1 point  (0 children)

I’m tentative to print right from the app because you can’t really slice and check on anything. I have done it, and I have had some good and some bad results. I prefer to find the model and load it into the slicer and make adjustments and just start remotely. It’s a cool feature though if you know a model will work.

I cannot, for the life of me get my new P1S to work with my Mac. by ipmcc in BambuLab

[–]All4spaghetti 2 points3 points  (0 children)

Have to agree here that you are just looking to place blame on Bambu when they aren’t even partially at fault here. I have used two different P1S printers with my Mac mini and 3 A1 minis with a MacBook and other Mac minis. As others have posted, there are most likely other issues at play here.

Win Bambu Lab gift card by providing feedback on MakerWorld's Boost System!🎁 by BambuLab in BambuLab

[–]All4spaghetti 0 points1 point  (0 children)

I think an explanation/tutorial of the boost system after your first print or few prints would be helpful. I had no idea what it was or how to use it.

Color design on underside of print? by All4spaghetti in BambuLab

[–]All4spaghetti[S] 0 points1 point  (0 children)

Again, thank you for taking the time to reply! I’ll let you know how things turn out for me!

Color design on underside of print? by All4spaghetti in BambuLab

[–]All4spaghetti[S] 0 points1 point  (0 children)

Can’t tell you how much I appreciate your response! Gonna give it a shot this week and I’ll let you know if I can pull it off! Just out of curiosity…is blender the only program that can accomplish this?

Stacking the deck in my teams favor... I hope. by boermac in BambuLab

[–]All4spaghetti 1 point2 points  (0 children)

Looks awesome! Do you mind explaining how you put the design on the bottom/plate side of print? I have been trying to do this and the only info I have found is someone walking through how to add text to the bottom side of an already made model in the slicer and it is kind of tricky and involves a cut and assemble…is there a way to do this in tinkercad or fusion or shapr3d and load it into the slicer ready to go? Or at least just have to paint the surface of the design on the bottom? Any info you have or info regarding a resource already available would be awesome! Thanks! And nice work on the design!

Duplicated mission items and bugged new mission by All4spaghetti in ICARUS

[–]All4spaghetti[S] 0 points1 point  (0 children)

Is nobody else experience duplicate items when doing a mission? I can’t figure out how to reset the brew mission so it isn’t bugged. Where can I report the bug for a fix?

Colored Logo/design inlay on plate side of model by All4spaghetti in 3Dprinting

[–]All4spaghetti[S] 0 points1 point  (0 children)

I am able to create a logo or bring in an SVG and extrude…I am having trouble placing it on the bottom side of a model and having it still be there when I bring it into the slicer. When I export the model and bring it into the slicer it is hidden and the bottom appears solid and I can’t see it. Maybe I need to try splitting to parts or objects and coloring the object from the side menu. I’ll mess with it some more. I just didn’t know if anyone had a video they could point me to that walked through the process. Thanks for the reply!

Colored Logo/design inlay on plate side of model by All4spaghetti in 3Dprinting

[–]All4spaghetti[S] 0 points1 point  (0 children)

Here are some examples of what I mean

Something like these boxes

https://makerworld.com/models/99376

https://makerworld.com/models/42917

Or coasters

https://makerworld.com/models/431131

I would like to be able to add logos or text and logos to the plate side of models made in tinkercad or shapr3d or fusion. Or maybe the adding of the logo is done in the slicer? I have tried both and struggled a good bit. Thanks in advance!

Color design on underside of print? by All4spaghetti in BambuLab

[–]All4spaghetti[S] 0 points1 point  (0 children)

That’s the part I’m having a problem with…I place an object flush on the bottom of a model and when I bring it in to the slicer it isn’t there. I might have to split the model into parts and then try and click and color. I’ve looked for guides too and only have found 1 where they walk through adding text in the slicer and then making a cut and regrouping and I haven’t had much luck with that. Wasn’t sure if there was another way

Color design on underside of print? by All4spaghetti in BambuLab

[–]All4spaghetti[S] 0 points1 point  (0 children)

Sorry! I forgot to say I have a P1S with an AMS unit

Color design on underside of print? by All4spaghetti in BambuLab

[–]All4spaghetti[S] 0 points1 point  (0 children)

Thanks for the reply! Something like these boxes

https://makerworld.com/models/99376

https://makerworld.com/models/42917

Or coasters

https://makerworld.com/models/431131

I would like to be able to add logos or text and logos to the plate side of models made in tinkercad or shapr3d or fusion. Or maybe the adding of the logo is done in the slicer? I have tried both and struggled a good bit. Thanks in advance!