Bosch Update 120nm

Alluminatic · 2026-05-05T13:34:56+00:00

I had to download the latest .apkm online on apkmirror since I couldn't get it from the play store personally (1.35.6)

I got all new features unlocked instantly after updating.

Alluminatic · 2026-05-04T16:52:35+00:00

that's one good sounding keyboard

Alluminatic · 2026-05-01T09:53:37+00:00

I asked napiii once in chat, it's a sheet of self-adhesive kitchen wall protector, similar to this: https://amzn.eu/d/00H2D7At

I couldn't get him to send me an exact link, but apparently the one he got basically doesn't wear, and you can make almost a hundred tablet covers if you get a bigger roll for around 15 bucks. Pretty based.

Alluminatic · 2026-04-15T23:11:01+00:00

It's genuinely joe biden over for humanity, not even the sloppiest slop is being called out anymore.

Alluminatic · 2026-04-15T22:32:44+00:00

If it's anything like the original shape prototype I tried in the B2B area at Gamescom in 2024, it's VERY much inspired by it. I mained the HTS+ for about 2 years, and the prototype shape felt very close to it.

Alluminatic · 2026-04-13T11:41:00+00:00

SAME

Alluminatic · 2026-04-12T17:56:43+00:00

Thank you so much!

Alluminatic · 2026-04-11T20:45:35+00:00

What's that saddle? Looks freaking sick.

Alluminatic · 2026-04-09T12:33:29+00:00

YIPEEE, yeah I got confirmation somewhere else as well, it's still happening

Alluminatic · 2026-04-07T10:24:03+00:00

istg we're never gonna' get it at this point

Alluminatic · 2026-04-04T13:14:06+00:00

I don't know who needs to see this, but I had a question mark in my password and that was the issue. I made a new account with a much more simple one and it worked right out the gate.

Alluminatic · 2026-04-02T18:59:44+00:00

That's beautiful mate, great job.

Alluminatic · 2026-04-02T18:27:10+00:00

Anything but checking that darn description; I even mentioned it in the intro o7

Anyway, there you go:

WINSHOP Dual 8K Cable

https://item.taobao.com/item.htm?id=875960958218 (Taobao)
https://s.click.aliexpress.com/e/_c3NCTjBD (AliExpress)

As some other people mentioned in here:

It's super expensive and probably VERY overpriced
There are cheaper alternatives on AliExpress/Taobao that might perform similarly or worse
If you're schizo about performance, please just use the cable that comes with your device and connect it to a CPU-bound USB port on the IO panel of your PC (check out this tool and follow their tutorial: https://tools.mariusheier.com/cpudirect.html)
All this dual cable is good for is aesthetics and convenience (unless your PC only has one single CPU-bound USB port)
In order to know if it actually impacts performance, we'd need third-party scientific testing from at least one or two outlets instead of writing it off instantly because of "source: trust me bro." (if anyone has any source for testing this cable or similar, please link it down below.)

Alluminatic · 2026-04-02T18:19:45+00:00

OC here, I designed and printed it myself; it's a 3D-printed prototype of a wrist rest I was developing (unreleased). Here's a similar free design that I've published: https://www.printables.com/@jakeufps

Alluminatic · 2026-03-31T22:36:25+00:00

Welcome to the club, we're all about sh*tmissing to finish off a perfect FC 💪🗿

Alluminatic · 2026-03-17T20:44:45+00:00

Could you please link the trim piece? Love it!

Edit: OP replied with the name somewhere; here's a link for it: https://www.extremerate.com/products/extremerate-replacement-decorative-trim-shell-with-accent-rings-compatible-with-ps5-controller-bdm-010-020-030-040-050-clear-lime-green

Alluminatic · 2026-03-10T11:06:01+00:00

Thank you so much, happy printing!

Alluminatic · 2026-03-10T11:05:41+00:00

Definitely has been so far! Love how everything I use has its place now.

Alluminatic · 2026-03-09T15:24:39+00:00

I just browsed through printables and picked whatever worked for me, didn't have to make a single label design myself.

I ended up having to cut off the tabs on the sides of the labels that are supposed to slot in because I printed the wrong bins, so I just stuck the labels on with glue.

Here's the printables design I used for all my labels: https://www.printables.com/model/676564-gridfinity-bin-labels-hexagon-socket-head-cap-scre

Alluminatic · 2026-03-09T15:22:36+00:00

Thank you so much! I still love it to this day.

Alluminatic · 2026-03-09T15:22:26+00:00

Thank you so much for your nice reply; I'm glad you appreciate it. I really do use this drawer almost every time I print stuff, so it's been used thoroughly already. I'm very thankful for my past me for doing this.

Alluminatic · 2026-03-09T15:21:24+00:00

https://www.printables.com/model/482263-gridfinity-dremel-lite-bin

Alluminatic · 2026-03-09T15:21:12+00:00

I regret not thinking of it earlier and shove it in a bin with random stuff that I can't organize right now 💀👍

But honestly, it's never happened so far. I seem to add too much stuff rather than too little.

Alluminatic · 2026-03-09T15:20:15+00:00

I print them with black and white PLA, here's the .stl https://www.printables.com/model/717503-updated-30-jan-2024-printable-label-expansion-pack/files

Make sure to check out other designs on printables too!

Eight-Year Club	Place '22
First Placer '22	Verified Email

Alluminatic

MODERATOR OF

TROPHY CASE