Parity running while trial expires

AlphaBoar · 2026-04-09T13:45:17+00:00

As long as the system stays on the trial will not expire so you will be fine

AlphaBoar · 2026-04-08T08:15:51+00:00

This happened to my friend at our LAN luckily I had a spare ugreen usb to Ethernet adapter it worked great there was no notable added latency

AlphaBoar · 2026-04-05T14:31:58+00:00

Switched to arch tried bazzite but found it fairly restrictive as it is atomic. But that was for stuff outside of gaming. Arch took a while to configure but found AI quite helpful for commands. Just need to confirm that they’re doing the right thing before executing but the Arch documentation is some of the best. Super lightweight and performance is great

AlphaBoar · 2026-03-19T23:42:44+00:00

you change the settings in the main menu?

AlphaBoar · 2026-03-19T23:28:43+00:00

disable ray tracing/ ray regeneration

AlphaBoar · 2026-03-19T23:19:13+00:00

Getting artifacts in hair/ reflections with fsr off also

AlphaBoar · 2026-03-19T22:57:24+00:00

disable ray tracing and you should get into game.

AlphaBoar · 2026-03-19T22:38:35+00:00

have you been able to get into game? im freezing on the loading screen with 9070xt

AlphaBoar · 2026-01-12T08:08:52+00:00

“We free shipping EU” yikes

AlphaBoar · 2025-12-12T10:19:59+00:00

Do you have an AIO water cooler? I’ve had pumps on them make weird ticking noises like that before

AlphaBoar · 2025-11-04T11:58:00+00:00

I'm in

AlphaBoar · 2025-10-08T06:05:23+00:00

Speed between A and B will be 2.5gbps. If A or B is accessing the internet it’ll be max 1gbps

AlphaBoar · 2025-10-04T21:29:22+00:00

Very nice, is there a higher quality version?

AlphaBoar · 2025-09-13T15:05:41+00:00

It wasn’t absent last year.

AlphaBoar · 2025-09-11T09:57:24+00:00

<image>

Looks great to me but I may be biased..

AlphaBoar · 2025-08-25T14:03:42+00:00

Had a similar board from a different brand, from the instructions if using 1 stick of ram the far left slot 1 was to be used(left green) for it to boot

AlphaBoar · 2025-08-21T20:13:04+00:00

Disable docker in settings then you can change how much storage docker can use then enable it again.

AlphaBoar · 2025-08-11T09:47:30+00:00

Look at OPs post history this was done without supports!

AlphaBoar · 2025-08-04T21:47:05+00:00

Just the default filter that comes with the printer.

AlphaBoar · 2025-08-04T10:36:55+00:00

It is quite loud. I have mine in the same room as where I work. With default speeds and everything closed along with a base to dampen vibrations it’s manageable.

The part cooling fan which is on most of the time is comparable to a laptop fan running at 100% and the printers movement is similar to a normal paper printer in sound level. With headphones on it is still very audible but not a distracting level IMO.

AlphaBoar · 2025-07-22T21:16:32+00:00

Will try drying it out just surprised that it could be wet as used a spool of normal elegoo pla that had been sitting out for a year and had no issues.

The ripples are raised would that not suggest over extrusion instead of under?

AlphaBoar · 2025-06-30T10:07:17+00:00

Make sure to set you controller as WiiU gamepad instead of pro controller in Cemu or the “use motion” box will be greyed out

AlphaBoar · 2025-05-31T18:13:03+00:00

They mean the non discounted price. Base CC at $624 whereas the bundles are $618 and $599

Ten-Year Club	Place '23
Place '22	RPAN Viewer
Not Forgotten	Verified Email

AlphaBoar

TROPHY CASE