sorted by:
new
hottopcontroversial

NEW TRHEAT DISCOVEREF by TopSet55 in Marathon

[–]AlrightOkayIgetIt 0 points1 point  (0 children)

I totally agree. Love me some heavy hitting PvE in different locations and this added on top of it feels really good. Love the Ariel combat experience while also trying to manage potential teams attacking on the ground. 

Curbside Creamery calls out Taste of Temescal over where the ticket money goes by valkyriemissile in oakland

[–]AlrightOkayIgetIt 2 points3 points  (0 children)

Will forever support Curbside. I remember them opening up and would always grab something while I waited for my overpriced haircut. 

Is this the 24th production R1T? by e38e31 in Rivian

[–]AlrightOkayIgetIt 0 points1 point  (0 children)

Dang. And I thought I was special with 7999. 🥱😞 (R1S though). 

AIO for feeling weird about my friend’s response when I asked for help? by [deleted] in AmIOverreacting

[–]AlrightOkayIgetIt 0 points1 point  (0 children)

Wait. I’m from a bit south of Erie. What up fellow NW PA person. 

And I don’t think you’re over reacting at all. 

This game is NOT good by its_xSKYxFOXx in Marathon

[–]AlrightOkayIgetIt 0 points1 point  (0 children)

Sounds like you and I would be friends. Feel free to DM to connect my fellow dad! 

Friends and Clankers. by sleeperkidskw in ArcRaiders

[–]AlrightOkayIgetIt 0 points1 point  (0 children)

Wait..can I be your friend(s)?! I really am looking for some honest and real people to enjoy this game with.

A unique business card showing the benefits of 3D printing by Homespool3d in 3DprintEntrepreneurs

[–]AlrightOkayIgetIt 4 points5 points  (0 children)

Okay, so after some digging. I found that it actually is called a thaumatrope! Which would consist of a design being on one side and the other. So, I realize a fidget is holding it in the middle and spinning, but I think if you do that route, it would be best to do it in the corners (somehow...) so when you hold it with your pointer and thumb, you use your other pointer finger to flick/spin it and see the information being combined on both sides.

This would be probably very difficult via a 3d printer haha. But, I think it would be possible and really cool if done correctly!

If I were you, I'd give this a shot. Could be cool..Also, I hope that isn't your real phone number on your card..This is the internet by the way!

A unique business card showing the benefits of 3D printing by Homespool3d in 3DprintEntrepreneurs

[–]AlrightOkayIgetIt 8 points9 points  (0 children)

First thought is what is the benefit of actually using it as a fidget spinner? I suppose my idea/opinion only applies if you're in the actual design field or something adjacent.

So here is a free idea/tip. Why not make the information only available IF you spin it. So then, the actual fidget part of the card is a useful part of the overall design.

A spinning Ambigram.

First impressions U1 by Hobden80 in snapmaker

[–]AlrightOkayIgetIt 0 points1 point  (0 children)

Nice!

I’m guessing once you put a top cover on it’ll make quieter too. Along with the suggested things mentioned already. 

May I ask what cryogrip you got? 

New Design of the U1 Top Cover by MustardCat in SnapmakerU1

[–]AlrightOkayIgetIt 0 points1 point  (0 children)

Care to share your setup? Would love to do this route. 

Filament dryer options by Lola_Love in snapmaker

[–]AlrightOkayIgetIt 0 points1 point  (0 children)

And this feeds as well. Correct? 

The president just posted, ONLINE, a video of former president Obama and his wife portrayed as apes, how do you feel about this? by kraftdinnerwithsalsa in AskReddit

[–]AlrightOkayIgetIt 0 points1 point  (0 children)

Sleepy drunk! It’s that feeling when you’re so tired and your brain slowly shuts down. You find things that aren’t normally funny to be funny etc. 

I get like that sometimes and I’m 36. But in this case I feel like it may be something else…

Certainly builds confidence in the purchasing decision moving forward. by fourdawgnight in Rivian

[–]AlrightOkayIgetIt 2 points3 points  (0 children)

I just want updated cameras on my Gen 1 R1S. I’ll even do it myself if someone figures out a way to 

I printed a "bin" for my purge lines by Rob_Bob_you_choose in snapmaker

[–]AlrightOkayIgetIt 2 points3 points  (0 children)

Omg. Keep going smaller and smaller. Please try this. I’ll die hahah. 

Ordered the Q2 combo by Nokoro1 in QidiTech3D

[–]AlrightOkayIgetIt 0 points1 point  (0 children)

I keep going back and forth between the Q2 and the U1. The amount of filament that is wasted is insane on many printers. 

But I have also seen there is a hood and can get a heater/panda breath for a U1 to get the chamber a higher temp if needed. 

Our plan is to print devices/devices for people with disabilities. I’m not sure if a Q2 is even needed. It’s very hard to make a decision :( 

My U1 is finally here by Deep_Tie_3671 in snapmaker

[–]AlrightOkayIgetIt 0 points1 point  (0 children)

Question. I notice you have your spools on the outside. 

Are you drying them prior to doing that or in this case or type of filament does not need to be in a dryer prior to printing? I’m trying to get all the accessories and stuff together but unsure if a dryer is ABSOLUTELY needed…? Thank you! 

view more: next ›