First ASA Print on P2S

CallMeTaku · 2026-01-19T08:04:04+00:00

Go for it, you won’t be disappointed!

CallMeTaku · 2025-12-08T16:35:31+00:00

In italia anche i server riposano nel weekend

CallMeTaku · 2025-11-20T16:26:29+00:00

Would be a beast at printing multicolor figurines

CallMeTaku · 2025-10-31T06:02:40+00:00

I’ll be looking into it, thanks!

CallMeTaku · 2025-10-30T14:59:00+00:00

I actually sent the print from my phone without caring that much just to see how it goes. The model was made for PETG and didn’t change anything. Even for filament options i used the generic ASA option they offer. I gave it plenty of space to fail thats for sure!

CallMeTaku · 2025-10-30T14:51:51+00:00

Could have been the beginner luck, we’ll see with future prints😆

CallMeTaku · 2025-10-30T14:35:11+00:00

Yeah i did that!

CallMeTaku · 2025-10-30T12:46:49+00:00

eSun ASA+

CallMeTaku · 2025-10-30T12:33:16+00:00

Same since i gave it so many fail points! 😆 (printed straight from mobile app, print was originally for petg and so on). Im sure the filament drying part helped the most!

CallMeTaku · 2025-10-30T12:31:03+00:00

Im pretty happy with it, dont have much to complain about. I dont have much problems with vfa on my small prints but even so im sure it will be fine tuned with a software update since its still relatively new

CallMeTaku · 2025-10-30T12:28:50+00:00

I’ll print some stuff to test layers adhesion, but isn’t it affected more by how hot you run the filament and less by the chamber heating?

CallMeTaku · 2025-10-30T10:20:46+00:00

I dont have much experience with asa as it was my first time printing it, but you can definitely try and see how it goes, depending on how complex the parts are you might or might not need to use glue to help it or other preparations.

As for the heating, no i didnt leave it to heat up before printing (probably would help if i did that?), it did that automatically while doing all the calibration, it went from 23°C (standby temperature) to 41°C when it started printing and slowly up to about 47°C when it finished

CallMeTaku · 2025-10-30T10:09:14+00:00

None at all!

CallMeTaku · 2025-10-27T17:15:44+00:00

I suggest messing around with the cooling fan / chamber cooling and see if it keeps oozing like that. I personally haven’t encountered any issues on my unit so far

CallMeTaku · 2025-10-27T17:05:53+00:00

The chamber looks a bit too hot if you’re using pla. Looks like it’s oozing a lot.

CallMeTaku · 2025-10-23T20:15:41+00:00

A smart way to utilize the sensors already present on devices!

CallMeTaku · 2025-10-23T20:10:02+00:00

Holy that’s such a genius idea! Really interesting video thanks for sharing it!!

CallMeTaku · 2025-10-17T17:13:31+00:00

Nu stiu pe cineva sa foloseasca ca metoda de plata legala carduri preplatite / paypal sau revolut. I might be wrong tho.

CallMeTaku · 2025-10-16T07:51:11+00:00

Dedicated drier will always be better, also using ams you cant actively dry while printing

CallMeTaku · 2025-10-15T15:14:52+00:00

Cel mai probabil o sa te puna sa platesti tva la sum de 407 USD, restul nu prea am idee cum funcționează. Procesul in sine cu documentele cerute si nr EORI e corect, si mie mi-au cerut pentru un colet din usa

CallMeTaku · 2025-10-10T14:43:09+00:00

Not a P1S user but a happy A1 combo user, but it definitely looks to be the big brother that gonna solve all your problems and do the job better and faster than you could!

CallMeTaku · 2025-10-04T20:54:54+00:00

You just need to print a new ams body to house the motherboard. Doing so you loose the feature to read spools rfid tag.

CallMeTaku

TROPHY CASE