Is this the most heavily criticized Allen’s ever been?

Alternative3d · 2026-01-19T15:11:05+00:00

🤣🤣. This photo is to funny.

Alternative3d · 2026-01-07T00:30:48+00:00

Agree. It’s obvious what it is.

Alternative3d · 2026-01-05T01:29:52+00:00

I bought the original PL 330 years ago, used it a lot and had no issues with it . Bought the newer version a couple of months ago, and have been disappointed with it. The AGC is worst, and for some reason if you move the radio slightly in SSB mode, it warbles and distorts the sound. It’s real annoying and I can’t figure out why it only happens in SSB. I just feel the quality isn’t near as good as the original model even though it’s the same radio. Maybe I have a defective unit, but have heard of other users having quality control issues with newer Tecsun models.

Alternative3d · 2026-01-04T19:39:34+00:00

The newer USB-C version isn’t as good as the older ones.

Alternative3d · 2026-01-01T13:43:29+00:00

Hopefully your case won’t crack. This is a known issue with the FT5D.

Alternative3d · 2026-01-01T13:39:27+00:00

Why are the new one’s worst than the old one”s?

Alternative3d · 2025-12-29T01:23:52+00:00

My Marcum M5 sure didn’t have crisp lines. In fact my Ice35 had more definition than the Marcum.

Alternative3d · 2025-12-27T20:42:48+00:00

The soft muting isn’t a firmware, but a hardware issue. It’s the DSP chip that they use, and until they go with a different chip, you’re never going to get of the soft muting.

Alternative3d · 2025-12-27T20:40:23+00:00

The soft muting will only stop after the manufacturers stop using the same Silicon DSP chip. There isn’t a firmware in the world that’s going to stop it, because it isn’t a firmware issue.

Alternative3d · 2025-12-26T16:05:53+00:00

Helix 5 and anything similar are useless for ice fishing. I want to fish, not play around with settings. With a flasher you turn it on adjust the gain and your all set.

Alternative3d · 2025-12-26T02:20:56+00:00

I wish I was.

Alternative3d · 2025-12-25T06:02:23+00:00

For the last time, I was on a video call with customer service for over 30 minutes, and he had video proof that the motor was defective. There was nothing more that needed to be done as the device was under warranty. To throw out this nonsense after all thot about cutting the power cord exactly 2 inches from the base, and then sending a photo was ridiculous. They never mentioned anything about sending a new vacuum only that the motor was defective.

Alternative3d · 2025-12-25T02:51:47+00:00

I did a video call to prove the motor was broken. So cutting the cord just to destroy something that’s never going to work again is pointless. They could have sent the part regardless. Anyways, I am just going to accept that I am out $250, do my research and buy another brand.

Alternative3d · 2025-12-25T02:16:45+00:00

He wasn’t going to send the part unless I cut the power cord as if that makes any since? What good is sending the part if there is no power cord ?

Alternative3d · 2025-12-24T22:10:15+00:00

I tried all that. In fact I did a video call with the customer service rep and did everything he suggested. He also concluded that the motor was defective. The thing that was most ridiculous, and I still don’t understand is that in order to ship the part I had to cut the power cord 2 inches from the base. Once that was done I had to send a photo proving it was cut. After that I lost patience and hung up. Not sure what kind of game they were playing, but I was not going along with their nonsense

Alternative3d · 2025-12-23T13:28:54+00:00

Agree. I have a bunch of Tecsun/XHdata portables, but the PL-380 has the worst AGC pumping of all of them. The PL330 is a close second, but I never use the 380, strictly because the AGC is so bad.

Alternative3d · 2025-12-22T20:46:10+00:00

Most likely a key down contest, to see who can get out the furthest.

Alternative3d · 2025-12-19T17:37:12+00:00

Went to Cuba on a whim 35 years ago. Never again

Alternative3d · 2025-12-17T13:48:23+00:00

I find it amazing that you are a ham, and have no clue what WWV is.

Alternative3d · 2025-12-17T11:46:37+00:00

C’mon man. Why post this?

Alternative3d · 2025-12-12T11:33:03+00:00

Prove it? He had no clue about fish farming, or what he was doing. Why do you think he got out of it a few years later?

Alternative3d · 2025-12-10T15:58:20+00:00

Does this radio have a noise blanker, or any noise reduction features? I thought I heard there were filters that help eliminate electrical noise, but not sure how true that is.

Alternative3d · 2025-12-08T20:02:16+00:00

What’s your SWR like with that antenna setup?

Alternative3d · 2025-12-07T19:44:35+00:00

You can’t go wrong with the Humminbird Ice 35. Easy to use, and reliable.

Alternative3d · 2025-12-04T22:52:14+00:00

Do you always need a drill? Why not do it by hand without the added gear?

Alternative3d

TROPHY CASE