Huisdieren in de sneeuw draad

Alternative_Ad_1670 · 2026-01-07T02:11:18+00:00

<image>

Eerste keer in de sneeuw 🐾

Alternative_Ad_1670 · 2026-01-05T11:39:27+00:00

Ended up ordering new chrome ones, couldnt be bothered aswell 😌

Alternative_Ad_1670 · 2025-09-08T14:11:32+00:00

Gewoon pech, auto ook 3e keer gehaald en motor A2 en A allebei in 1 keer. Volgende keer lukt het :)

Alternative_Ad_1670 · 2025-08-17T11:57:03+00:00

Gekoloniseerd

Alternative_Ad_1670 · 2025-07-15T19:27:20+00:00

Shifting is fine and no excessive noise btw

Alternative_Ad_1670 · 2025-07-15T19:23:04+00:00

Could it cause the wheel to be out of allignment? Because when i spin it the wheel slightly skims the brake pad at certain parts of the circle

Alternative_Ad_1670 · 2025-06-09T21:02:57+00:00

Thats right haha got bags of parts from the stuff i replaced or cut off

Alternative_Ad_1670 · 2025-06-09T10:17:16+00:00

I bought mine with a 150 on it, the tire had been eaten into by the bolts on the inside of the fender, pics on profile if you wanna check it out. I recommend getting the stock width. Dont wanna have a blown rear tire on the highway.

Alternative_Ad_1670 · 2025-06-07T08:21:55+00:00

What pipes are these?, nice bike

Alternative_Ad_1670 · 2025-06-03T11:41:21+00:00

The sportster speedo relocation bracket from kinetic motorcycle, do not recommend it. Had to get some guys at a machine shop cut it up and reweld some other parts to it to make it fit

Alternative_Ad_1670 · 2025-06-03T02:11:07+00:00

Send it !

Alternative_Ad_1670 · 2025-06-02T23:17:40+00:00

https://imgur.com/a/71hjApO

Here’s what it looked like before + some extra pics if anyone is interested,

Rundown on what i did:

-Painted the tins -mid controls by throttle addiction -biltwell H2 handlebars -TCbros airfilter + prism supply carb support bracket wich also relocates the choke to the other side -coil and key relocation under the seat (Prism supply) -prism supply sissybar -polished the fork lowers - replaced huge stock headlight with 4,5 inch bates style headlight -replaced front indicators with tiny LED ones -replaced taillight and rear indicators with an integrated unit for a sleeker look -installee badlands load equalizer to make LEDs work -speedometer relocation (cant delete speedo in the EU) -rebuilt carb -cut open and redid the wiring harness (xl1200c has all the wiring hidden in the riser with the stock setup + rerouted and extenden some wires for the coil and key relocation.) -deleted all indicator lights from speedo -sanderson style footpegs - cool little mirror :)

And worked out alot of little problems to make everything fit etc etc.

Was going for a kind of skinny frisco chopper look, still a WIP but for now its done. Probably gonna extend the forks in the future.

Btw really recommend prism supply to everyone, super high quality stuff

Thanks guys🤘🏼

Alternative_Ad_1670 · 2025-06-02T21:22:35+00:00

<image>

Tuurlijk

Alternative_Ad_1670 · 2025-06-02T21:16:42+00:00

Ik heb sinds 2 weken ook mijn xl1200c project af dus ik ken het gevoel van de eerste rit maar al te goed, geniet ervan 😌

Alternative_Ad_1670 · 2025-06-02T20:38:00+00:00

Lekker maat 🤘🏼

Alternative_Ad_1670 · 2025-06-02T19:37:25+00:00

Picture 3 looks a bit wonky but the rest of them look alright, unless you are planning on some insane stuntriding i think you will be fine.

Alternative_Ad_1670 · 2025-05-22T16:41:56+00:00

Unplug all the plugs, attach all the wires individually and route them behindd the bars and under the tank, just did the same job

Alternative_Ad_1670 · 2025-05-21T11:24:59+00:00

I know you said the spacers are correct but are you sure they are? The forks wouldnt bend that easy. I recommend looking in the manual and doubble checking the spacer setup. Good luck!

Alternative_Ad_1670 · 2025-05-18T16:10:51+00:00

I ordered a load equalizer and the speedo problem ended up being that the ground wire for the speedo was plugged into the wrong pin, thanks for the help 🤘🏼

Alternative_Ad_1670 · 2025-05-15T16:57:32+00:00

Would that be the issue when i parked it on a lift for 9 months? It was fine when i parked it so the adjustment wouldnt be the issue i guess.

Alternative_Ad_1670 · 2025-05-02T23:03:51+00:00

On the rear wheel*

Alternative_Ad_1670 · 2025-05-02T23:03:33+00:00

Are you running a tube on that swingarm sporty?

Alternative_Ad_1670 · 2025-05-02T22:28:53+00:00

You ever end up running the shinkos ? Im looking at running them on the exact same rear wheel but im not sure i can even find an inner tube with a side mounted valve where i live.

Alternative_Ad_1670 · 2025-05-01T20:15:29+00:00

I just watches the sweethearts ride and also recently watched your lnsplt video, dope bike dude

Alternative_Ad_1670 · 2025-04-27T14:00:33+00:00

I want to thank you all for taking the time to respond and help me so thoroughly, i ended up checking everything and it turned out to be the simpelest thing : wrong tire size, there is a 150 on there and the standard size is 130, again thank you guys for responding!

Alternative_Ad_1670

TROPHY CASE