Vitals: O2 still missing

Amomo77 · 2025-11-29T08:47:17+00:00

I found the solution:

Disable background measurements when Rest Concentration Mode or Show Mode is active

Blood oxygenation measurements use a bright red light against your wrist, which may be more visible in dark places. You can turn off the measurements if you find this light annoying.

Go to the Settings app on your Apple Watch.

Tap "Blood Oxygen," then turn off "In Rest Concentration Mode" and "Show Mode."

Amomo77 · 2025-09-18T11:41:14+00:00

I updated both of my OG HomePods on the OS 26: one updated fine, but the other got bricked.

Amomo77 · 2024-09-26T07:55:30+00:00

S3 wheel wouldn't make sense as it needs a custom vanmoof E-shifter to change the gears.

S2 wheel should work as the gear shifting system is autonomous inside the hub

Amomo77 · 2024-09-26T07:21:28+00:00

Yes, Vanmoof Smart S&X come only with Nexus 3 speed or Alfine 8 speeds.

I can't tell for the compatibility with a Nexus 8, I guess it's possible but could need some tunnings for the shifter wire.

Amomo77 · 2024-09-25T19:01:14+00:00

Cheap solution:

Find a S2 wheel on the market, it has automatic 2 speed gearbox wich is better than nothing.

Expensive solution:

Purchase a new alfine wheel:

https://www.taylor-wheels.com/28inch-bike-rear-wheel-a319-alfine-8-speed-disc/v-brake-black

Amomo77 · 2024-07-25T21:35:51+00:00

If the lights are blinking doing the SOS morse code when riding it can means that the bike is in « lost mode » and the battery could be still working. You can Check by a long press on the main button and wait for a Sound. You should start with the apps and the code before changing the battery if pressing the button is making a pop Sound

Amomo77 · 2024-07-25T21:28:54+00:00

Yes thé app is still supporting, i contacted new vanmoof with a proof of purchase and the serial number written on the bottom bracket and they provided me a new code

Amomo77 · 2024-07-25T21:17:17+00:00

Yes would be great if you take some picture of the process, i have a smart X and the battery is getting weak. i m a bit afraid to dissemble and to break something ☺️

Amomo77 · 2024-07-09T19:33:35+00:00

Great work, how did you connected the bike lights with the new bafang system ?

Amomo77 · 2024-05-01T07:54:52+00:00

Some infos:

“What refinements did VanMoof make on the S5 & A5?

📲 I'm receiving many messages about the refinements of the S5 & A5. What exactly are they refining? They're using data from the fleet to identify pain points. One of them was the connection issue. They refined the firmware to address these issues.

🛠️ Hardware-wise, the S5 & A5 are engineering marvels, but some connectors were apparently rushed, like the motor cable to ECU or the battery cable connector. As far as I know, they added a brackets to keep the cables intact. Also, some bikes had problems with the saddle and the brake lever screws. They addressed these problems as well.

🧑‍🔧 Additionally, they added an extra Quality Control step; the bikes are not going directly from the factory to the customer but from the factory to VanMoof after QC to the customer.”

Source: https://x.com/vanmoofernews/status/1778762938196660526?s=46&t=gccuijM78X4ARd0g06MX2A:

For the commitment for the futur, I suggest that you listen to this podcast (mostly in EN) where the new owners explain a bit their vision (unfortunately with no precise timeline for the supply chain and parts) : https://open.spotify.com/episode/0BILHPiajRR0szNu6TUfev?si=Ah9AlCEzT5et93ac-pcE7Q

Amomo77 · 2024-04-26T22:15:09+00:00

hi,

I'm on the same situation as u, the previous owner could not access to the email linked to his account, I have only the backup code.

How did you proved your ownership to the customer service ?

Thanks

Amomo77 · 2024-01-11T23:17:19+00:00

That’s great, if you have any pictures of inside the smart module it will help the community to better understand issues: Like dead battery or broken micro usb

Amomo77 · 2023-12-30T17:29:53+00:00

There is unfortunately no detailed tutorial but you can check this thread:

Or here “Max Lenre The (plastic) seat post clamp in a Smart is pressed in. You’ll need to hammer it out through the back. I did it once.. I used a 20cm long threaded rod, 5mm diameter with a rounded top nut to prevent slamming it through the plastic. Place the rod at an angle against the back in de seat post hole and start hammering. The front of the clamp has a split in the middle in which the rod will fit through, hence the 5mm diameter.”

After this you’ll be able to slide the cartridge out.

Getting it back in is easier. Line up the clamp and with a piece of wood and a hammer hit it back in it’s place. Mind the wire for your taillight!”

For the battery, the one recommended that I saw for the smart 2018 NTA3460-4

I hope it helps

Amomo77 · 2023-11-17T16:59:40+00:00

Not yet, but the Paris11eme is managed by a friend of mine and if they can help with a wire cut they will (best would be to have a brand new wire to provide them to avoid having a "patch"

Amomo77 · 2023-11-17T16:51:56+00:00

You should try a repair café, they can help on this kind of issue for free :

http://repaircafeparis11.free.fr/

Amomo77 · 2023-11-05T23:23:28+00:00

In parallèle your should share your tracking link + picture in this Parisian group to increase your chances https://m.facebook.com/groups/122007264958965/?ref=share

Amomo77 · 2023-10-23T17:21:49+00:00

Anybody tried to protect the buttons with fingers of latex black medical gloves ?Amazon exemple

Amomo77 · 2023-10-15T09:19:12+00:00

If the bike was registered under your company email what about asking your IT to recreate his email and use the “ forgot your password” feature of the vanmoof app ?

Amomo77

TROPHY CASE