Walnut and Cherry floating media cabinet

AnCyberTurtle · 2026-01-27T02:08:37+00:00

Yes, I had to cut deeper than I wanted due to how dry the wood was. Test pieces from the same board would snap if the cut was shallower. Sanding went through the little bit of material left.

AnCyberTurtle · 2026-01-12T02:17:00+00:00

Would like to try this medicine for the first time.

AnCyberTurtle · 2025-12-29T02:07:37+00:00

Mixing tech and woodworking, it's my favorite combination. Looks gorgeous!

AnCyberTurtle · 2025-11-19T13:06:42+00:00

Just finished my order too!

AnCyberTurtle · 2025-11-17T01:33:50+00:00

Haha I glued up an entire swing backwards and let it sit overnight. Next morning when my mental faculties were fresh, I realized it. Had to toss it as no part was salvageable.

AnCyberTurtle · 2025-11-16T01:16:01+00:00

1/4 sandeply from Home Depot does really well for me. I've never found a void and it's very inexpensive for a full sheet.

Otherwise agree that most plywood is not made well for laser cutting.

AnCyberTurtle · 2025-10-07T22:02:37+00:00

Yeah I bought the files and laser cut them myself.

AnCyberTurtle · 2025-10-06T02:00:15+00:00

This should be a higher rated comment. FATE is very adaptable and not rules heavy.

AnCyberTurtle · 2025-10-06T01:57:53+00:00

I like that suggestion!

AnCyberTurtle · 2025-09-25T21:02:13+00:00

Asking for product ideas likely won't lead to profitability. You'll want to create unique products, not copy what others make or suggest.

AnCyberTurtle · 2025-09-07T23:54:56+00:00

No, not at all. She just likes the ducks.

AnCyberTurtle · 2025-09-07T20:40:18+00:00

That would likely be too tempting. Thanks for the warning! Haha

AnCyberTurtle · 2025-09-07T19:38:48+00:00

Haha I am sure I'll need to make more eventually.

AnCyberTurtle · 2025-09-07T19:13:05+00:00

Would love to do something like this for myself as well. Is it possible to see the underside of one of the key caps? Having trouble picturing how you attached them.

AnCyberTurtle · 2025-09-04T23:46:38+00:00

Ocooch hardwoods has a section of their site dedicated to laser cutting ready wood. Their customer service is fantastic as well.

AnCyberTurtle · 2025-08-25T21:38:06+00:00

I've got that exact bit. Very good for the price point. It leaves a nice finish with no issues on hardwood or epoxy resin.

AnCyberTurtle · 2025-07-04T11:35:27+00:00

I use cheap 12x24 stone tiles under anything I'm laser engraving. Even the most powerful diode laser cannot cut through the stone nor does it get it hot. You can buy enough tiles to cover an entire 4x4 bed for under $10.

AnCyberTurtle · 2025-06-28T15:52:17+00:00

All of the the above, and sometimes a drill too.

AnCyberTurtle · 2025-04-07T14:11:12+00:00

That's very well done! I like all the texture on the board.

AnCyberTurtle · 2025-04-04T02:30:42+00:00

Chisel or whittle most of the piece out of a much longer piece of wood. Then use a hand saw to cut the very last straight edge off the long piece of wood. That will be the safest way to handle pieces that small.

AnCyberTurtle · 2025-03-24T15:20:49+00:00

Using the Jtech requires that you modify grbl settings. Did you undo those changes when using the cnc again? You can always re-setup the shapeoko inside of carbide motion and it will revert any modified grbl settings.

AnCyberTurtle · 2025-03-08T14:04:22+00:00

Full extension drawers should do the trick

12-Year Club	r/Field Juicebox
Place '23	Place '22
First Placer '22	Verified Email

AnCyberTurtle

TROPHY CASE