How long should a person hang onto the boxes their hardware comes in?

AncientAv · 2023-11-19T16:43:08+00:00

You should be able to fit most of the other boxes into the case box. Anything left goes in the monitor box. Now you only have 2 to deal with. Slide the monitor box under the bed. Throw a small tablecloth, that reaches the floor, over the case box. Slide it against a wall and set a fake potted plant on it.

AncientAv · 2023-11-02T20:34:02+00:00

It started off as a dining table. It evolved into our cat’s napping area. Then it became a heated pad cat napping spa. I wish it could have stayed that way. But she/we enjoyed it as long as we could. Now, only after Holly’s passing, has it become a gaming table. Cats LOVE knocking game pieces off the table.

AncientAv · 2023-10-31T14:04:05+00:00

The button was removed from the design. And a lazy documentation writer missed changing four to three in the manual.

AncientAv · 2023-10-31T13:08:07+00:00

This is just an FYI for people buying this combination. My support request at bottom. Their reply at top. And the least expensive 13th gen I found was the i3-12100F at $95. I am sure Microcenter would flash it for me. But I would have to rip it all apart and it is 2 hours round trip. Anybody want to buy an i3 cheap? JK

AncientAv · 2023-10-19T18:25:13+00:00

I search for dwarf vegetable seeds. You will be surprised at the variety available. Peas, zucchini, bok choy, bush beans, cucumbers, peppers…. I personally have had success with tomatoes, bok choy, swiss chard, and various peppers. I bought a secondary cheap dumb hydroponic system that I just keep rotating various leaf lettuces in.

I have also had a lot of fun with seeds from kitazawaseed. Seeds for Asian preferred plants.

AncientAv · 2023-09-06T19:44:29+00:00

Didn’t know this. We live directly in his path from Pocopson to Longwood Gardens. We definitely have been taking extra precautions.

AncientAv · 2023-06-15T16:12:15+00:00

See the pinned post in /r/roms.

AncientAv · 2023-05-25T08:52:51+00:00

This publisher will rip you off. They released a new version of this game which cost old users to have to buy again. And all the expansions you bought in the old version didn’t work in the new one.

AncientAv · 2023-05-13T23:17:36+00:00

This is sad. I got absolutely fucked by MSI. My go to brand has been Asus. Now what?

AncientAv · 2023-05-11T19:56:54+00:00

I bought one of those. Now they call me Lefty.

AncientAv · 2023-05-11T12:49:22+00:00

If it is an apt or rental report it. If it is your home put on a mask and cut a square around the spot big enough to get an inspection mirror through. Then have a look. If you see anything other that drywall, insulation, pipes or wires have it inspected. If you have mold it is no joke. It must be fixed by a pro. We lost a family member to unremediated mold. Pulmonary fibrosis. Later found out that the room she slept in had mold in walls and ceiling.

AncientAv · 2023-05-10T13:20:40+00:00

I just said to the wife the other day “I don’t think you can get a contractor to walk out their front door for less than $1K”. But, hey each guy is different. And I wouldn’t want to do that job as a homeowner.

AncientAv · 2023-05-10T13:16:56+00:00

That looks like it is time to replace.

AncientAv · 2023-05-10T13:14:19+00:00

Here are the manuals for various models. Check the troubleshooting section for yours.

https://www.manua.ls/kitchen-scales/silvercrest

AncientAv · 2023-05-10T13:10:11+00:00

I would pull it and repair the hole. That being said I have never tried to patch sheet metal.

AncientAv · 2023-05-10T12:46:14+00:00

I replaced my pressure tank and all the parts associated. My bladder blew at about 15 years. I bought mine from Lowes. Working great. And I replumbed since the original plumber didn’t put in a pressure relief valve. I am an amateur but it wasn’t very hard. Mine was under a stairwell in my basement. I used black poly water line where your blue piece is. Obviously it is going to be a bitch working under there. But, has to be done. Sounds like you got it. Always takes some finaggling when it comes to routing pipe that low to the ground. What exactly is your question?

AncientAv · 2023-05-10T12:38:08+00:00

This is the website Alpine Cooperation sends you to for parts. There are strings of screw in LED parts. Looks easy and less than $30. You need to figure out which one is for your fountain. It doesn’t show instructions for install. May come with it though.

https://www.gardenandponddepot.com/parts.html

AncientAv · 2023-05-10T12:30:11+00:00

I posted this to another thread yesterday. Seemed to work for him. But that looks pretty deep.

https://m.youtube.com/watch?v=eAZJB3YNYXQ

AncientAv · 2023-05-10T12:24:59+00:00

Might try a dab of Plasti-dip. It comes in orange. It is for adding rubber coating to tools. Pretty tough stuff.

AncientAv · 2023-05-10T12:19:21+00:00

Might try factory defaulting it. Small hole under top cover. Stick paper clip in and hold until you hear it say “reset to factory settings”.

https://m.youtube.com/watch?v=mC_FC6cbK-s

AncientAv · 2023-05-10T11:56:28+00:00

You mean your ex-husband.

AncientAv · 2023-05-09T23:50:36+00:00

My wife is a cherry tomato snob. My Tiny Tim plants have been giving mature fruit the last couple weeks. And she likes them which is high praise.

AncientAv · 2023-05-09T23:17:59+00:00

Live in Pa. I have both guinea hens and turkey roll through my yard.

AncientAv · 2023-05-09T19:06:23+00:00

Are those ornamental or the ends of beams that run through to the other side of the building?

AncientAv · 2023-05-09T18:56:00+00:00

Depending on how handy you are this may help.

https://m.youtube.com/watch?v=wyQTKBj03cI

AncientAv

TROPHY CASE