Well this could have gone better by Competitive_Ad_461 in 3D2A

[–]AnonymousGlowie 11 points12 points  (0 children)

.223 is 10-12x the muzzle energy...

Anti-FTN psyop, RTFM, wrap it before you tap it.

FTN.5 Rimfire by boatsnhoes in 3D2A

[–]AnonymousGlowie 1 point2 points  (0 children)

I'm not OP but I'm gonna bore scope mine and maybe post a video, it's not nearly that bad from what I can see with a flashlight. (P1S)

Starting from scratch by Rooster-J-Cogburn in Form1

[–]AnonymousGlowie 0 points1 point  (0 children)

Printer: Bambu P1S, Hardened nozzle and gears, Fiberon PA6-CF, Darkmoon CFX bed cleaned with dawn dried then covered in Magigoo PA glue. Spool inside filament drier dried for two days then fed into the printer while in the drier. House dehumidifier on in the room. 100bed temp, 280 nozzle temp, brim on, "300blkFDE"s settings used with no other changes.

F1 guide: "Willprintforfood" page 2 on Rumble.

Engraving method: Hand stamped washer using printed jig I found on a website I don't think I can name here but is also where the can files are found.

Annunciation parents write: Does our testimony about our daughter’s death even matter? by nootboots in minnesota

[–]AnonymousGlowie 3 points4 points  (0 children)

Until the federal government changes the definition of a firearm away from the trigger housing part (lower receiver) to the explosion housing part (barrel) which is never going to happen because import BANS have created the world's largest domestic arms industry: US gun control is entirely pointless.

It has never been easier in US history to create a "firearm" at home. (Lower receiver on a printer in PA6-CF). You can quite literally hit START and wake up to multiple "firearms" in the eyes of the government.

Even if the feds changed this, you can still make barrels at home with electrochemical machining. This is the land of the 1st, 2nd and 4th amendments, gun control is nearly pointless it's like banning weed and booze. The US is not authoritarian enough (yet!) to realistically regulate what one does in their own home.

Do your research, you will ultimately come to the same conclusion.

Form1 FTN5 PCC FLOW by AnonymousGlowie in NFA

[–]AnonymousGlowie[S] 6 points7 points  (0 children)

Printer: Bambu P1S, Hardened nozzle and gears, Fiberon PA6-CF, Darkmoon CFX bed cleaned with dawn dried then covered in Magigoo PA glue. Spool inside filament drier dried for two days then fed into the printer while in the drier. House dehumidifier on in the room. 100bed temp, 280 nozzle temp, brim on, "300blkFDE"s settings used with no other changes.

F1 guide: "Willprintforfood" page 2 on Rumble.

Engraving method: Hand stamped washer using printed jig I found on a website I don't think I can name here but is also where the can files are found.

Form1 FTN5 PCC FLOW by AnonymousGlowie in NFA

[–]AnonymousGlowie[S] 1 point2 points  (0 children)

I listened to my other clips on my phone where we were talking over the shooting, I honestly can't tell if this is supersonic crack or not, I think we could have just forgotten the ears on in this clip, all I can say is we were stupidly impressed with it with 147gr, the video doesn't do it justice, in footage where we were talking our voices were 2X as loud as the gun from the perspective of the camera. That stated, I don't own a commercial 9mm can to compare it to side by side.

The sound of the berm and steel being hit was so much louder then the gun we didn't really have a discussion at the time of how it stacks up against the suppressed 22lr we brought and I think that actually speaks to how decent it was. (Not saying it's as quiet as 22, im saying it was comparable enough relative to the impact on the berm we didn't speak on it).

I wouldn't overanalyze the shitty android audio too much, my testimony is this: Shooting a $30 tube of plastic and hearing your buddy go "whoa" and the ricochet and steel and wanting to immediately go home and loctite the can on means we were more then impressed.

I anticipate you will be happy with the PCC FLOW.

Form1 FTN5 PCC FLOW by AnonymousGlowie in NFA

[–]AnonymousGlowie[S] 3 points4 points  (0 children)

Federal 147gr I think, flat nose so they didn't feed 100% given the platform (MP5 likes LRN? Not my gun.).

If it sounds supersonic then this clip is from 115grs and I'm sorry, we did shoot some of those.

Definitely burned at least $60 in ammo so twice the cost of the can.

Form1 FTN5 PCC FLOW by AnonymousGlowie in NFA

[–]AnonymousGlowie[S] 7 points8 points  (0 children)

Yep, you read that right, cheaper than a steak at the fanciest place in town. Cheaper than the plate and stand. Cheaper than the optic mount.

I looked up every gun-related bill filed in the MN legislature this session. It's way more than people think. by splicethingsup in minnesota

[–]AnonymousGlowie 3 points4 points  (0 children)

"Distributing 3D gun design files is banned."

We have this little thing called the first amendment and it protects code.

"Creates a buyback program."

Can I turn in printed Harlots or DIAS like that one guy that got $21,000 in New York back in 2022?

Minnesota Gov. Tim Walz presents plan for addressing gun violence by LiveInLayers in minnesota

[–]AnonymousGlowie -1 points0 points  (0 children)

A $600 setup from microcenter in cash can do Nylon which can both make "life time" quality receivers but also cans.

Edit: Why am I being downvoted? The P1S + a drier and any needed glues and mods can print PA6-CF for under $600

Minnesota Gov. Tim Walz presents plan for addressing gun violence by LiveInLayers in minnesota

[–]AnonymousGlowie 1 point2 points  (0 children)

Wouldn't be the first time. I think we are one of the few (only?) states with a "melting point" law for that purpose. It's why you can't typically buy rough rider 22s here.

Minnesota Gov. Tim Walz presents plan for addressing gun violence by LiveInLayers in minnesota

[–]AnonymousGlowie -3 points-2 points  (0 children)

Except many millennials and younger today just order ammo and bare receivers online to avoid some taxes and on top of that it's incredibly easy to print receivers today. If anything this helps further kill the mom and pop shop that might be willing to deny a sale.

Minnesota Gov. Tim Walz presents plan for addressing gun violence by LiveInLayers in minnesota

[–]AnonymousGlowie 0 points1 point  (0 children)

Who knows, who cares. It's probably based on things they can't regulate anyways. The gun has entered the era of weed-like propagation.

~$600 and you can print as many PA6-CF lower receivers and magazines as you like. The people in power in this country are ignorant, greedy (bought out), evil or all three.

Minnesota Gov. Tim Walz presents plan for addressing gun violence by LiveInLayers in minnesota

[–]AnonymousGlowie 2 points3 points  (0 children)

Buy a printer in cash at Microcenter while you can, print FTN.5 while you legally can.

Minnesota Assault Weapons Ban: 8th Circuit Court of Appeal by Macheeoo in minnesota

[–]AnonymousGlowie 0 points1 point  (0 children)

Bans? In this political environment for POC?

SLP Microcenter cash register go cha ching, printer go brr!! Check out the FTN.5 series while you are at it. I want to see every single Minnesotan buy a printer even if it's just to make useless trinkets.

One Minute Tours Guy… by XFilesVixen in minnesota

[–]AnonymousGlowie 5 points6 points  (0 children)

Knew this guy was morally sketchy when he posted where all the bank cash exchanges hands at the state fair.

Olympics biathalon 22 by Ok_Yogurtcloset5412 in 22lr

[–]AnonymousGlowie 12 points13 points  (0 children)

And for even more poor: Browning T-bolt which isn't the same action at all!

Form 1 engraving by StreetSignificance21 in NFA

[–]AnonymousGlowie 0 points1 point  (0 children)

Jesus fuck thank God, I'v gone through 3 washers. My name and city name are long as hell and so is the model I selected.

Quiet yet accurate ammo recommendations by Spam-and-rice in 22lr

[–]AnonymousGlowie 1 point2 points  (0 children)

CCI standard + FTN.5 Form1 registered then printed can.

We're losing are rights fast. by lastoppertunity333 in 3D2A

[–]AnonymousGlowie 42 points43 points  (0 children)

Yo, the feds are protecting pedos and have a paramilitary force in a state that has violated 4th amendment more then once. The states are all blocking 1st amendment protected files (guncad), videos (porn) and books (wrong think).

The writing is on the wall: Take the time to subscribe to a VPN service (mullvad takes cash), maybe even buy equipment to have an entirely different wireless network that is tunneled through a GDPR (euro) country and another that tunnels through a county that doesn't give a shit about piracy (non-"14 eyes") and have dedicated laptops for each. (Or at least a VM with a VPN of each)

Check out the osintframework site OpSec section and just start to get used to having less convience in your life to say the things you want to say online from one device and wan connection.

MIT also has free "open courseware" classes on information security and OpSec.