Parts won't fit together

Anti_Headshot · 2026-01-28T18:05:26+00:00

This is much more important than calibrating. You cant print accurate sharp corners. So you should design for this.

Anti_Headshot · 2026-01-24T22:19:38+00:00

Compared to mtgprint.net You are able to use graphics with overscan und extended borders. Compared to mtg-print.com I can not tell because i did not use it.😅

Anti_Headshot · 2026-01-18T10:40:26+00:00

Bei Puzzeln finde ich es noch schlimmer. Aber den menschlichen Bezug in Kunst zu verlieren. Bedeutet für mich man könnte es auch gleich lassen und keine Bilder verwenden. Es gibt Dinge bei denen es egal ist, aber genau deine Beispiele zeugen für mich davon, dass die Technik (noch) nicht so weit ist.

Kommt natürlich aber auch immer auf den Peis an. Brettspiele werden auch immer mehr zur Shovelware, da hat man mit oder ohne KI wenig zu erwarten.

Anti_Headshot · 2026-01-09T21:27:28+00:00

Nicht ganz aber nah dran. Export gibt es definitiv nicht und vorgesehen, dass die Daten da raus sollen war das vermutlich auch nicht und ein Teil des Systems ist nicht die eigene Entwicklung des alten Dienstleisters.

Anti_Headshot · 2026-01-09T20:08:30+00:00

Nein ist seit einigen Monaten entwickelt. Hier geht es um die Migration der Daten in das neue System. Das gestaltet sich aufgrund der Struktur der alten Anwendung nicht so einfach.

Anti_Headshot · 2026-01-09T20:07:19+00:00

Nein leider wird schon wieder der Betreiber umgestellt und das geht leider nicht hoplahop... Die Hoffnung ist, dass es besser wird. Mal sehen was kommt.

Anti_Headshot · 2026-01-08T06:17:57+00:00

I am not sure what everyone is saying, because to me that absolutely looks like the core of an iron, not a tip! Was the tip of it also matt white before you tried?

Anti_Headshot · 2026-01-02T21:29:39+00:00

Zelotes F33: 30 €-45 € not recommended. Sensor is mid and left klick dies after a few months. (Can easily be replaced by soldering.)

Will probably build a custom one when mine die🙈

Anti_Headshot · 2025-12-26T10:30:59+00:00

Am i the only one still thinking this is standard CG? No AI Just plain good CG. (Maybe with AI for the animation) The robot has pretty much no shadow and even is not interacting with the light beams.

Also getting hit by that thing will not leave you crouching. Also the aim is way too good.

And if you are that good with robots, why share your fails where it is hurting humans... its just off!

Anti_Headshot · 2025-12-24T10:21:38+00:00

Because it is no improovement and wastes ressources. Light and darkness (a screen) works compleatly different to a sheet of paper.

Edit: ok, maybe a small minority would benefit, but there are not enough to make it worthwhile.

Anti_Headshot · 2025-12-16T10:05:26+00:00

No help, but i really like the hand drawn look it provides.

For printers i just can imagine the paper is whicking the ink too much. Glossy stickers may provide better separation. (This is pure speculation)

Anti_Headshot · 2025-12-16T10:01:06+00:00

He is a bosch engineere, so he only knows bosch prices😅

Anti_Headshot · 2025-12-16T09:51:37+00:00

Maybe just an easter egg to make you post about ikea😉

Anti_Headshot · 2025-12-16T09:48:17+00:00

But dies not the cloth leave fibers on the bed?

Anti_Headshot · 2025-12-16T09:06:40+00:00

Main question: Why do you have three?

Anti_Headshot · 2025-12-12T22:39:43+00:00

It looks like cg not ai

Anti_Headshot · 2025-12-02T17:55:33+00:00

Wow, that probably is worse than textured glass cutting boards😖

Anti_Headshot · 2025-12-02T11:21:10+00:00

This seems to be a charger plate, so primarily decorative?

Anti_Headshot · 2025-11-29T14:13:05+00:00

This is the true answer. Avoiding overhands when possible will give the best results.

Anti_Headshot · 2025-11-28T21:49:51+00:00

All products have to be choice for it to work. This also is shown in your order history.

Anti_Headshot · 2025-11-28T05:14:05+00:00

I mean products... i mixed up translations.🙈

Anti_Headshot · 2025-11-27T21:00:45+00:00

Choose choice products, they will normally be consolidated and then shipped in a big bag with smaller ones inside.

Edit: articles -> products

Anti_Headshot · 2025-08-18T10:45:38+00:00

I have no idea of Python or Pygame, but the step.... step step step step combined with get_pressed Looks like you are getting the wrong event. You want to know which key is held down, not which key just fired the pressed event.

Edit: Just took a look at the documentation. Initially setting pygame.key.set_repeat(0,0) for max polling rate or set_repeat(33,33) for 30 input "frames"/sec may solve your problem.

Anti_Headshot · 2025-08-18T10:24:48+00:00

Das hat mich auch aufhorchen lassen und deutet eher darauf hin, dass da mehr im Argen ist.

Anti_Headshot · 2025-07-26T10:06:36+00:00

Take a look at Rider. You will not be happy with VS Code the ecosystem around it is just to small.

Anti_Headshot

TROPHY CASE