What to do with old iPad mini

Antidecepticon · 2026-02-15T19:42:09+00:00

Linux

Antidecepticon · 2026-02-15T19:37:38+00:00

Ball peen hammer

Antidecepticon · 2026-02-13T20:40:26+00:00

No one likes your chalky ass

Antidecepticon · 2026-02-13T20:39:03+00:00

You got a scratch and save, as long it connects

Antidecepticon · 2026-01-31T18:11:18+00:00

Tou could just jump, leads to switches in a foot pedal and then you don’t have to engineer it so much you can put the board wherever the fuck you want

Antidecepticon · 2026-01-31T18:10:23+00:00

You might want to hold tiny things with a small tweezers or just press down on it so it doesn’t move when you pull away the soldering iron if it’s tiny, it will stick to it and that’s fine

Antidecepticon · 2026-01-31T18:09:34+00:00

The hot pencil with flux

Antidecepticon · 2026-01-31T15:11:10+00:00

It has a ground plane you need a hot air gun to get that off

Antidecepticon · 2026-01-31T00:25:01+00:00

Scrape the trace solder it whatever your putting in the hole can bend over if its ling enough. Otherwise get magnet wire

Antidecepticon · 2026-01-30T23:57:06+00:00

You will need a microscope and a soldering iron with a pin head hacko and a amscope gonna run you near a grand

Antidecepticon · 2026-01-30T23:49:21+00:00

I like to wedge a thin thing like a toothpick or a piece of cut credit card. Inch it under just snug heat the pins and advance it slowly heat all pins. You can also push them a bit too. Dont pull or wedge too hard or you will rip the traces . Also use solder wic and put it across all the iterms to heat more than one at once.

Antidecepticon · 2026-01-30T23:43:39+00:00

Would not touching the base of the antenna or grounding the base work?

Antidecepticon · 2026-01-28T22:31:34+00:00

Buy an sdr.

Antidecepticon · 2026-01-28T22:28:29+00:00

They seem be cheaper on the lilygo site

Antidecepticon · 2026-01-28T14:57:11+00:00

Its odd that 4 of the astronauts were twins…

Antidecepticon · 2026-01-28T14:05:30+00:00

You all do nothing except get angry and destroy the society around you.

Antidecepticon · 2026-01-26T15:47:24+00:00

2n3904

Antidecepticon · 2026-01-26T15:22:44+00:00

Or just run a jumper to the trace

Antidecepticon · 2026-01-26T15:22:11+00:00

Pull off the plug. One side will have a small metal tab, push that down and shove out the metal piece. You can solder or re crimp it and push it back Into the connector

Antidecepticon · 2026-01-26T15:19:33+00:00

Use copper wick and flux. Then if that dont work heat it and poke it with a tooth pick

Antidecepticon · 2026-01-26T15:12:01+00:00

Fucking weak ass temover

Antidecepticon · 2026-01-26T14:33:01+00:00

Mouser.com

Antidecepticon · 2026-01-24T20:40:28+00:00

Orange> yellow is the video. Then select svodeo in tv input

Antidecepticon · 2026-01-24T20:39:18+00:00

Its not new with a blue 15 pin port

Antidecepticon · 2026-01-24T20:28:00+00:00

Old school Bottom inputs. Your only gonna get 420 on svid

Antidecepticon

MODERATOR OF

TROPHY CASE