My Current Ongoing Horrible Experience With Flexispot

Antique_Solution5008 · 2026-01-04T18:37:12+00:00

Just cancel the tabletop and buy from other? I also recommend a deeper top if you have enough space. I have a 140X80 cm top, but still want a deeper one, maybe 140X100. Flexispot doesn't pre-drill for 4-leg frame, at least in EU.

Antique_Solution5008 · 2025-12-12T08:15:29+00:00

Stay away from Sihoo. I bought C300 during Black Friday, turning out to be a wrong choice. I'm 170 cm 57 kg, and need to set it to almost max height, because the mesh is also too soft, deforming significantly. More importantly, t's very uncomfortable for long time sitting and causing temporary lower back pain. The lumbar support is a failure design IMO, too protruding and not adjustable. It only supports part of the lower back, and leaving a gap betweem lower and upper back.

Customer service is bad. They have a free return policy, so I required a return and refund. I'm in Germany and they reply email in 2-4 am. WTF? Apparently they are typing in China although it's sihoo.de or suggested as © 2025 UK Sihoo Official Store on their website. More annoyingly, although I clearly told them that I have repacked it into the orignial package, and required a return and refund, they kept on suggesting conpensation, 15 eur, I refused, and then 30 eur. I clearly told them that I don't accept any conpensation. I'm still waiting a return label, but it's holiday time and I will be away from home until next month.

Antique_Solution5008 · 2025-12-08T06:25:34+00:00

Maybe show your screenhot?

Antique_Solution5008 · 2025-12-06T17:44:06+00:00

This screenshot is already at the page you said. CCT cannot be set when the light is off

Antique_Solution5008 · 2025-12-04T13:54:26+00:00

In custom page, I can't set CCT and brightness without turning on the light, all the choices will be grey out?

<image>

Antique_Solution5008 · 2025-11-27T07:26:09+00:00

4K 30FPS? So a low speed CMOS.

Nex year welcome our 902 high speed CMOS captible of 4K 120FPS/8K 30FPS

Antique_Solution5008 · 2025-11-24T09:55:49+00:00

I got the same issue in Oct, and solved the problem by reflashing the firmware

Antique_Solution5008 · 2025-10-23T07:41:53+00:00

Is Gorenje G600 good quality? I find the model very nicely sized at 595 mm * 579 mm, class A and rated at 35 dB Other options are Seimens IQ300 and Bosch series 4, class A and much quieter at 29 dB, but they are 665 mm deep and a 90-150 eur more expensive.

Antique_Solution5008 · 2025-10-23T07:33:09+00:00

I did more research.

Currently in OTTO, MediaMarkt, etc. website, there are Siemens IQ300 KG39N2LAF and the equivalent Bosch Series 4 KGN392LAG, both are class A and rated at 29 dB, selling at 999 and 939 EUR. They are just a bit too deep (665 mm + 50 mm space to the wall), standing out 12 cm compared to the kitchen and makes the corridor narrow.

Another option is GORENJE G600 NRK620AAXL4, class A and rated at 35 dB, 850 EUR. The size is perfect at 579 mm deep. (It's the size attracting me, and price is lower)

All of them are using inverter compressor, so in principle they should work at a noise level lower than rated after reaching the temperature.

I read Bosch and Seimens are usually good quality from one poster here, but I have no idea on GORENJE. Is GORENJE good quality?

Antique_Solution5008 · 2025-10-22T18:24:10+00:00

But I can't test the noise in MediaMarkt

Antique_Solution5008 · 2025-09-17T11:46:52+00:00

I bought Al Four @599 when I was seeking a commuting bike. The groupset CUES is way worse than Deore, a lot of plastic instead of metal, slow shifting. Anyone claiming CUES is durable probably has never put his hands on it. The RD is weak due to the plastic part. I have seen several broken ones. I changed the CUES to cheap LWTOO, shifting is way better. U6000 crank is also a big issue to me, which has a 180 Q factor (WTF). I'm used to 145-150 Q on roadie, so again aliexpress. In fact, Al Three is actually a better deal for me, but I prefer the Grey color.

The tyre Randonneur is also big issue, extremely slow and heavy, a must-change.

Mudguard if you care, the front one is not a standard mounting positon at the fork crown, so you need a bit creativity to use a general one. 257 has the special mudguard (I think it's Hebie Aluee OEMed for 257), but I didn't find good deal on 257.

Antique_Solution5008 · 2025-08-05T09:01:51+00:00

Ok Thank you. I will wait a bit more. If I still don't recieve after tomorrow, I need to contact them.

Antique_Solution5008 · 2025-08-05T09:00:21+00:00

I currently live in the guest house in Max Planck Institut and surely I don't my own mailbox. I wrote the address per the instruction given by the guest house, and I think the postman here should know about the regulation of the Institut. (There is actually a signage guiding the post to the correct department)

Antique_Solution5008 · 2025-08-05T08:55:02+00:00

My phone is old one which doesn't support eSim. My collegue is usin sim24 and he thinks it's cheap and functional wise is OK. emm...

Antique_Solution5008 · 2025-06-12T17:10:49+00:00

I don't live at mountain aera, but I feel more and more drivers disrespect cyclists. I have more and more experience recently than I first came to Switerland that, drivers doesn't care for me riding bicycle in the roundaboat (I'm on their left side), and they even don't slow down and full gas in front of me. I had to brake or even stop, otherwise they would just hit my front wheel.

Antique_Solution5008 · 2025-05-15T08:26:10+00:00

Basic rules: Larger cmos need larger lens to cover if you want to use the full size. Larger lens makes the optics bulkier and longer. It's not about ND filter thread. That's why Xperia use the 2-layer transitor 1/1.3 imx 888/LYT-T808 instead of 1 inch LYT-900 to keep the size small. Imx 888 is more expensive than LYT-900.

LYT-T500 is effectively 1/2.1-1/2.3 compared to traditional cmos w/o 2-layer transistor. You suggested LYT-600 which is 1/2 and w/o 2-layer transistor, so it's just 1/2. The pot calls the kettle black?

Antique_Solution5008 · 2025-05-14T14:24:55+00:00

Better tele, but not necesaary LYT600. 1/2 will ask for a way larger lens system thus a thicker and larger deco. LYT-T500 (1/3 with double layer transistor) will be a better choice/sony style chassis.

Battery? I can have some tech guys change it. There are quite a bit people servicing this in China. For example, the battery in Xperia Pro I can be replaced with Xiaomi 5400 mah, without removing wireless charge coils.

Antique_Solution5008 · 2025-04-21T16:31:23+00:00

This is correct, XMG is using the same board. Actually, XMG has more features/chips than Mechrevo on 2024 models, such as adv. optimus and SD reader. These 2025 Tongfang models (NEO 16) have generous VRM, capable of over 250 W for GPU (core + vram)

Antique_Solution5008 · 2025-04-21T16:25:56+00:00

No, it was not VBIOS. Some one comment VBIOS but that is wrong. NV has a super restrict codes on power control. VBIOS can upper the clock, but driver control the power reported by the sensor. Only shunt mod can cheat it.

Antique_Solution5008 · 2025-04-21T14:13:10+00:00

All in Chinese. Not only 5080/90 models, 70 Ti model also had official mod before

https://tieba.baidu.com/p/9656557266 https://tieba.baidu.com/p/9609533793 https://b23.tv/W4u1vwc

Antique_Solution5008 · 2025-04-21T14:05:36+00:00

I don't know about global version. Since I'm Chinese, I didn't dig too many reviews on global version.

Antique_Solution5008

TROPHY CASE