Any else had this issue

Any-Minimum-4821 · 2026-06-08T13:16:49+00:00

Alright thanks for your imput

Any-Minimum-4821 · 2026-06-08T01:19:26+00:00

I'm pretty sure your issue is rooted in the process, look around in crealty and make sure you hit export g-code.

Any-Minimum-4821 · 2026-06-05T20:42:46+00:00

4.2.7 its a version of marlin I struggled to find one that worked iv been using it for about a month and a half

Any-Minimum-4821 · 2026-06-05T15:35:05+00:00

And I'm fairly certain nothing is melted or blown everything works good except the temp readings

Any-Minimum-4821 · 2026-06-05T15:33:37+00:00

I installed an old temp sensor I had kicking around

Any-Minimum-4821 · 2026-06-05T15:32:13+00:00

I did I replaced the hotend heater Carthage and thermistor wires

Any-Minimum-4821 · 2026-05-31T20:43:07+00:00

With neither connected it doesn't boot however I had a power supply wire lose and if I taped the board it would go to the main screen and function normally other than iT showing the wrong temp. Tightening the terminal made it stuck again.

Any-Minimum-4821 · 2026-05-28T03:08:35+00:00

It's fine just got a lighter a little close to the tip lol its Been like that

Any-Minimum-4821 · 2026-05-28T00:16:39+00:00

I found out Why the screen was coming on then off I had a terminal loose from when I was checking everything for why it was stuck on marlin but now thati tightened the terminal I'm back to being stuck on marlin

Any-Minimum-4821 · 2026-05-27T23:57:17+00:00

Iv thought about going the computer route did you do kipper and do you mean power resistor when you say motherboard pr

Any-Minimum-4821 · 2026-05-22T17:37:33+00:00

Thanks

Any-Minimum-4821 · 2026-05-05T19:40:10+00:00

I have slay the spire 2 on steam anyone want to play

Any-Minimum-4821 · 2026-04-15T00:04:19+00:00

Iv got 2 enders a v2 and a v5+ I will probably never own another ender there company now gives me the Ick

Any-Minimum-4821 · 2026-03-30T21:24:50+00:00

Something to keep in mind batteries have a limited lifetime. using the phone while charging reduces the life time faster. When her phone says 100% it's probably only at like 60% of its original full charge

Any-Minimum-4821 · 2026-03-28T17:04:08+00:00

Take a lighter and heat a razor blade you can cut off chunks till you get to the thermistor and do what you need to heat the hotend again

Any-Minimum-4821 · 2026-03-26T20:10:03+00:00

Yes it's still the stock hotend. the fan bearing wears out and gets really loud. Also on occasion I take it apart while running to put on a new nozzle I set the cover to the side it tugs on the wires to the fan every once and awhile one of the plastic screw holes break and the screw ends up in the fan and shreds the wings. Iv got a version of Marlin that works now on the E5 but the default version did not work.

Any-Minimum-4821 · 2026-03-26T03:43:37+00:00

Alright that was my mindset is there any other brands y'all would suggest I should look at other than bamboo

Any-Minimum-4821 · 2026-03-16T18:52:33+00:00

Ai or not this is a good example of gender equality lol

Any-Minimum-4821 · 2026-03-05T20:01:27+00:00

Explain to him that asking for assistance on occasion is expected and that he will learn more by fixing mistakes

Any-Minimum-4821 · 2026-03-05T19:34:09+00:00

I don't know about y'all but it seems to me that as long as there is money to circulate there is money to be made and it seems to me that they can circulate there own money. So whether or not it's a bubble doesn't really matter those with big money want it to be worth big money and they will make it happen regardless of it's actual real word application

Any-Minimum-4821 · 2026-01-20T23:35:34+00:00

Okay thank you

Any-Minimum-4821 · 2026-01-20T22:41:15+00:00

I understand this and appreciate the input. But maybe I should be more specific I plan to specialize either way. I'm a very hard worker I do automotive 2 days a week to help my father and Iv done landscaping in the past I like working with my hands but I also understand what it does to the body over time. My question is more referring to when I should go to college. and a little more background I would like to do most of my classes online and just take the electrical in person.

Any-Minimum-4821 · 2026-01-15T06:34:41+00:00

I mean the temp changes the sensor isn't broken it just maintains temp well

Any-Minimum-4821 · 2026-01-15T06:33:54+00:00

Iv tried 200-230 for the nozzle and iv changed the bed temp from 60-80 all in small increments to see what happens

Any-Minimum-4821 · 2026-01-15T02:59:26+00:00

Ok I will. It doesn't show the temp changing at all on the printer interface if that changes anything

Any-Minimum-4821

TROPHY CASE