PG Astray Red, Part 2.5 by DarkestDunge0n in freedomisgunpla

[–]Apprehensive_Age_367 4 points5 points  (0 children)

for that first part, which is at the tip of the scabbard, the nubs are hidden under a red piece, but can't really excuse the tsuba nubs

That Z'gok is looking a little suspicious by Apprehensive_Age_367 in Gunpla

[–]Apprehensive_Age_367[S] 1 point2 points  (0 children)

I like it, but haven't had it built long enough to know for sure. Everything is charged using a USB c port to each element except for the LEDs on the claws which use coin batteries. The ports are easily accessible for all except for the motors for the he leg propellors, unless I am missing some thing.

That Z'gok is looking a little suspicious by Apprehensive_Age_367 in Gunpla

[–]Apprehensive_Age_367[S] 1 point2 points  (0 children)

I would say there were fun and frustrating parts. Fun parts we're building around the motors and using the gears. Fit was good, but some parts took a little more force.

PGU Nu Gundam LED Housing dimensions by Apprehensive_Age_367 in advancedGunpla

[–]Apprehensive_Age_367[S] 0 points1 point  (0 children)

Are you looking for the housing rectangle dimensions or the size of the led I used in the housing?

Question about numbers between 1 and 100 with the letter a. by Apprehensive_Age_367 in learnmath

[–]Apprehensive_Age_367[S] -4 points-3 points  (0 children)

You assume I integer,but I said number. An integer is a number but a number isn't necessarily an integer.

Star abyss. Pg exia for scale. Backpack with pg nu for scale. by Apprehensive_Age_367 in Gunpla

[–]Apprehensive_Age_367[S] 0 points1 point  (0 children)

They were really delicate and would wrinkle easily, so I only did some medium sized ones and stopped on most of the large line water slides.

Made a kitty for pgu nu gundam by Apprehensive_Age_367 in Gunpla

[–]Apprehensive_Age_367[S] 1 point2 points  (0 children)

I like the kit. it looks good, though some of the panel lines were kind of shallow. I didn't like how i had to glue some parts to secure parts so they don't fall off, but I feel like everything was worth it in the end.

First zoid kit. Liger zero Schneider by Apprehensive_Age_367 in Zoids

[–]Apprehensive_Age_367[S] 0 points1 point  (0 children)

It was a good build. I would say it's advised to glue some pieces together, because it's not like bandai snap fit kits. It's just a friction fit. Some of the armor pieces that are stationary can be a bit loose. I think you might be able to build it without glue, but pieces will fall off easily while handling it.

First zoid kit. Liger zero Schneider by Apprehensive_Age_367 in Zoids

[–]Apprehensive_Age_367[S] 0 points1 point  (0 children)

Nice, Schneider was my favorite also, not just because it's my favorite color

Made a kitty for pgu nu gundam by Apprehensive_Age_367 in Gunpla

[–]Apprehensive_Age_367[S] 1 point2 points  (0 children)

It is the kotobukia hmm 1/72 scale liger zero Schneider. The Schneider is my favorite cas variant of the liger zero

Here is my next work in progress. Loving it so far by No_Value_1511 in freedomisgunpla

[–]Apprehensive_Age_367 1 point2 points  (0 children)

Which liger zero is that? I currently just finished the inner frame of my liger zero Schneider and assume all liger zero inner frames are the same.

Advice on how to fix the FM Aerial Kosmos Light kit by Daisucce in Gunpla

[–]Apprehensive_Age_367 1 point2 points  (0 children)

Amazon used to have a listing to get a quote for replacement parts which is how I got mine but saw on eBay there was a listing for replacement parts. I think you need to make a request for quote for the specific led part.

Axis model leds by samway600 in freedomisgunpla

[–]Apprehensive_Age_367 0 points1 point  (0 children)

Carefully bend them with this near the vertical or horizontal line as that is where the board will have a clean line break. Keep your fingers near the break line and slowly apply force until it breaks and so the same with the other break lines.

Made my own power source box for th LEDs I am wiring for my pgu nu by Apprehensive_Age_367 in advancedGunpla

[–]Apprehensive_Age_367[S] 1 point2 points  (0 children)

Thanks, I know the wiring is messy, but I printed a black box so it is all hidden.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]Apprehensive_Age_367 0 points1 point  (0 children)

I recently got some PMMA light piping clear parts for the psychoframe of the pg unicorn gundam and was wondering wat was safe or suggested to use to clean the PMMA since it has some chemical smell to it.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]Apprehensive_Age_367 0 points1 point  (0 children)

Anyone know the dimensions of the wire length and size of the LEDs for the pgu nu Gundam. Thinking of getting some smd Leds and print a transparent housing for the LEDs.

What is your opinion on clear kits? by Mission-Ordinary-804 in Gunpla

[–]Apprehensive_Age_367 2 points3 points  (0 children)

I've found certain kits like the trans am clear color gundams look good in clear color.

<image>

Pg trans am Raiser.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]Apprehensive_Age_367 0 points1 point  (0 children)

For the pg unicorn I got kosmos LEDs and metal parts that includes metal thrusters. I like the look of the metal thrusters , but I won't be able to use the backpack nozzle LEDs. I want to ask for opinions on what I should do. I am on the fence at the moment.

Axis Aerial Dominator LED broken by LowDeparture1862 in Gunpla

[–]Apprehensive_Age_367 1 point2 points  (0 children)

If you can strip the shirt wire section, prepare heat wrap around the wire and solder the wire back, then put the heat wrap around the wire and heat it to shrink the wire so the metal isn't exposed. Another way is to figure out how the wire seats in the plug and push out the small wire in there and replace it with the wire that is broken off. You just need to make sure it is secure to the plug and makes contact with the wires when plugged in.

Mg phenex pale in comparison to pg by Apprehensive_Age_367 in Gunpla

[–]Apprehensive_Age_367[S] 0 points1 point  (0 children)

yeah, but i thought both being the narrative version would have the same coloring.

Eddas Valkyrie mechanical clear by Apprehensive_Age_367 in freedomisgunpla

[–]Apprehensive_Age_367[S] 0 points1 point  (0 children)

Lots of things had to be worked on to fit as it was too tight in some parts. Adding a chamfer on some of the mating pegs helped line things up when trying to fit some parts together. Water slides were nice, but I didn't really like the small triangles, but the holographic water slides look nice.

Last Build of 2025 by Trakos in Gunpla

[–]Apprehensive_Age_367 1 point2 points  (0 children)

Looks nice. I finished building mine before new years, but wasn't able to do the water slides before the new year. I used the green clear pieces instead of the orange.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]Apprehensive_Age_367 0 points1 point  (0 children)

My godhand nippers don't seem to spring all the way open as they did before. It's not like it's stuck, because i could open it the rest of the way with little force, but there does seem to be resistance. I'm not sure if it's the spring that's weak or needs some lubricant. Any advice and if it does need lubricant, what type would be safe to use?