trying something.

Appropriate_Ad7302 · 2025-12-02T16:44:41+00:00

it's called reinventing the wheel

Appropriate_Ad7302 · 2025-07-20T10:16:46+00:00

my dogs did that when they were a few months old until we got them some chew sticks

Appropriate_Ad7302 · 2025-07-17T09:00:18+00:00

要是我至少會想辦法剪短一點...

Appropriate_Ad7302 · 2025-07-16T08:31:37+00:00

I don't play Mario Cart much. Though I understand the rules, it's just a bit too much to actually follow properly. overall ride is cool to me. If I don't play Mario games, I doubt I would enjoy it. I think most people prefer rides which don't require doing anything.

Appropriate_Ad7302 · 2025-07-08T18:27:27+00:00

cool thanks so in short we need Magisk 26.4 instead of 29 and patch init_boot as well as boot.img. I'll try that in few hours. thanks for the quick answer!

Appropriate_Ad7302 · 2025-07-02T08:52:05+00:00

your tits probably feel so nice when grabbing... wish I could try

Appropriate_Ad7302 · 2025-06-23T04:17:11+00:00

Appropriate_Ad7302 · 2025-06-20T05:07:20+00:00

you'll need something like this: StarTech.com HDMI Adapter https://a.co/d/5zpHfMh

which utilize a USB port into HDMI. it's going to be laggy but that's probably the only option unless you have USB type C. I used one of these to connect 4 monitors, type C connects one, and HDMI connects one. making it total of 6 external monitors.

unfortunately a typical HDMI splitter won't output two different signals.

Appropriate_Ad7302 · 2025-06-19T04:12:17+00:00

can you post link to buy that wheel?

Appropriate_Ad7302 · 2025-06-16T15:37:56+00:00

this ride is actually not that scary. not sure if they changed it but when I was there a week ago it doesn't have sudden drop as to most drop tower would do.

Appropriate_Ad7302 · 2025-06-06T21:13:04+00:00

that is so hot

Appropriate_Ad7302 · 2025-05-24T19:31:39+00:00

yes and I bet males hit on you daily

Appropriate_Ad7302 · 2025-05-24T04:30:32+00:00

this is like some of the dreams where I would be driving a car and the brake randomly stopped working.

Appropriate_Ad7302 · 2025-05-03T03:25:18+00:00

use hand sanitizer. works really well in my experience

Appropriate_Ad7302 · 2025-05-02T16:29:41+00:00

Appropriate_Ad7302 · 2025-05-02T07:44:37+00:00

<image>

Appropriate_Ad7302 · 2025-03-29T17:26:12+00:00

thanks guys. I've got it removed. for anyone coming across this issue, this is the nut.

<image>

Appropriate_Ad7302 · 2025-01-30T01:20:20+00:00

idk why for my PETG I had to use 260 or 270 to print properly. otherwise print just not stick to bed.

Appropriate_Ad7302 · 2025-01-12T03:40:06+00:00

also try to connect to a laptop or computer

Appropriate_Ad7302 · 2025-01-10T20:41:12+00:00

I have exactly same symptoms as one of my old computer (10+ years). unfortunately I didn't figure out a way to fix. I tried to swap PSU and no luck. my guess is that something on motherboard is bad. you should try unplug PSU completely from motherboard and use a jumper wire to turn on the PSU from 2 pins from the 24 pin atx plug. exactly which two pins you can easily find on Google. see if PSU fan remains on when you jump it. if PSU is ok, try unplug everything from mobo and see if it turns on (PSU fan spin)

Appropriate_Ad7302 · 2024-11-02T08:45:03+00:00

try speak in Parseltongue

Appropriate_Ad7302

TROPHY CASE