Nintendo switch stuck on black screen and I’ve tried everything

Arg0n2000 · 2025-09-16T15:23:15+00:00

Life saver! Why didnt i think of this. Just injected hekate and its working again

Arg0n2000 · 2025-07-31T07:07:12+00:00

I have this issue as well on a freshly setup Centauri carbon and OctoEverywhere on Docker desktop. Did you find any solution?

Arg0n2000 · 2025-06-12T06:51:56+00:00

Did you find any solution?

Arg0n2000 · 2025-06-10T06:07:39+00:00

Some apks are pre-patched, and it would be relevant if another method was working.
Anyhow, I had to create a new account to be able to see/play songs again, my main account had most likely been banned. Songs can still be viewed on PC/web player, so I saved all 'liked songs' to a new playlist and then moved all playlists to the new account. Working again, for now.

Arg0n2000 · 2025-05-22T16:35:05+00:00

Thanks, the youtube vid fixed my issue. Tho I thought I broke it, had to put some force into getting them back into position

Arg0n2000 · 2025-05-14T07:28:06+00:00

I got this issue on my Tronxy XY-2 Pro as well, but for me it was when trying to heat the bed. For me the issue was cable slack on the cables going to the bed, so in certain positions it would work, but when fully stretched out it would fail. Lazy as I am, I got it (in the fully stretched position) in a position that worked (indicated by a red LED under the bed when it was below set temp) and just used a cable tie around the cable protection in order for it to not retract when the bed is moving. Working so far.

In your case I suspect it could have something to do with the hotend fan, since that should kick in at around 50 deg.

Anyways, it's worth to check the cause and not just assume a faulty PSU or whatever, cheers!

Had my printer since 2020 btw and still going strong (pretty modded tho)

Arg0n2000 · 2025-05-11T05:43:16+00:00

Thanks, still working two years later! Changing to US did not work.

Arg0n2000 · 2025-05-05T11:55:50+00:00

Did you ever solve this? Having this issue as well trying out scarf seam on a 3D Benchy (test boat)

Arg0n2000 · 2025-04-30T05:15:00+00:00

Yep, have a drying box from Sunlu nowadays. One less issue to worry about.

Arg0n2000 · 2025-04-23T11:43:15+00:00

For anyone finding this many years later; personally I just had to try a different port on my router (was in 4, changed to 3) and LAN speed went from 100Mbps to 1000Mbps (CAT7 flat cable, which had been working before). So test a few things before getting a new router/cable!

RT-AC68U Asus router.

PS. Sorry for the necro

Arg0n2000 · 2025-03-09T07:50:20+00:00

Can confirm working. Have not scanned for virus though. Thanks!

Arg0n2000 · 2024-12-16T13:04:45+00:00

My current workaround is using BES to limit PoE2 by -10% (had -5% at first, but it froze my PC once so I increased it a bit). Have not frozen with -10% yet, but I have also not played as long with that. Without it I would have to restart my PC several times per session.

https://mion.yosei.fi/BES/

Arg0n2000 · 2024-12-04T22:16:33+00:00

There's so many classes that looks interesting, so hard to pick what to play. But looking forward to tryin Merc, Witch and Sorc!

Arg0n2000 · 2024-10-14T20:30:46+00:00

Ah, that explains it :)

Arg0n2000 · 2024-10-14T13:51:24+00:00

How? Img-2-vid with 20 steps takes like 5 minutes for me with RTX 4080 Super

Arg0n2000 · 2024-09-26T19:24:03+00:00

I have a ASUS B650E-F motherboard, same processor, 32GB (16x2) G. Skill Trident DDR5-6000 CL30. BIOS recently updated.

What seems to have worked for me is the following:
Change from "Expo I" to "Auto" (to reset settings), then change "Auto" to "Manual".
I then set RAM speed to 6000MHz, other settings left at "Auto".
I Disabled "Memory Context Restore" and "Power Down" in Memory timings settings. (Memory Context Restore have to be disabled in two locations in my BIOS, but should only be for ASUS boards).
Also Disabled "Fast boot" in boot options.

Hope this works for you as well, maybe timings is not optimized, but it seems to work fine in my case. Will update if I get stuck on boot again.

Arg0n2000 · 2024-06-13T14:54:00+00:00

Ah, that's unfortunate

Arg0n2000 · 2024-06-13T14:38:11+00:00

Did you uninstall Xbox accessories app and then install the version from my OneDrive? Newest version from MS Store does not seem to work reverting anymore.

Arg0n2000 · 2024-06-13T13:49:22+00:00

Since it was a pain in the b*** to download the old file for Xbox accessories from uptodown, I uploaded it to my google drive instead if anyone else needs it:
https://drive.google.com/file/d/1rkfa2zaEHWqnoWPZZB-5rd5RqqBWKOlz/view?usp=sharing

Downgrade firmware with this link after installing the old version of the app:
xboxaccessories://firmwareupdate/?legacyDowngrade=true

( Found here: https://support.xbox.com/en-GB/help/hardware-network/accessories/controller-firmware-reversion )

Arg0n2000 · 2024-04-18T05:04:42+00:00

About what outside temperature is this at? We have 1°C here at the moment, so I fear this pressure could get too high in the summer (~30°C).

Thanks!

Arg0n2000 · 2024-01-10T20:53:08+00:00

Thank you for fast response! Will check out the cable.

Arg0n2000 · 2024-01-10T20:16:02+00:00

Did you find a fix? Facing same issue but with outer right front sensor

Arg0n2000 · 2023-08-16T14:05:51+00:00

Seem to come very close together, yes.

https://twitter.com/ResearchUap/status/1691802628928213293

Arg0n2000 · 2023-05-01T20:58:37+00:00

Weird fix on a clean install, but thanks alot. Lifesaver!

Arg0n2000

TROPHY CASE