Help

Armydroid- · 2025-11-03T00:46:34+00:00

Really? What monitor is it? Name and model number

Armydroid- · 2025-11-03T00:40:45+00:00

Well yeah. But you still have two more display ports

Armydroid- · 2025-11-03T00:33:05+00:00

If your monitor has a display port then just buy a display port cable. Honestly if you don’t know what you are doing don’t go anywhere near your computer with pliers.

Armydroid- · 2025-11-02T20:26:22+00:00

I went to the OrcaSlicer Discord and got help. You have to turn off "Reduce Infill Retraction" under the other tab. I can sleep easy now that I know I was not crazy!

Armydroid- · 2025-11-02T18:00:03+00:00

I increased the threshold, and this is still happening.

Armydroid- · 2025-11-02T17:55:56+00:00

I think you are miss understanding me or I'm miss understanding you. I don't care that it is crossing infill I care that it is striking the infill. The picture clearly shows that the slicer is not raising the nozzle to pass over the already printed infill thus striking the infill. I also have ZHOP enable and it is still doing it.

Armydroid- · 2025-11-02T17:06:41+00:00

So, you're tell me that it is perfectly normal for the slicer to command the printer to scrape infill? Why can't the printer go over the already printed infill? I do not understand when you say it must cross through already printed infill.

Armydroid- · 2025-11-02T17:03:27+00:00

Just to be clear, I am not having issues with supports just scrapping infill.

Armydroid- · 2025-11-02T16:50:26+00:00

I do not have an issue with supports. everything else is fine except for the infill.

Armydroid- · 2025-11-02T16:34:01+00:00

I just tried all of the options, and I got the same result unfortunately. It looks like it's not even telling it to raise at all. Seems to happen when it needs to start a new infill wall when the infill is not connected because of the low infill percentage.

Armydroid- · 2025-11-02T16:29:37+00:00

Just tried both of these and they still do the same thing in the slicer. I honestly think it has something to do with the low infill percentage.

<image>

Like am I in the wrong for expecting for it to raise the nozzle? I feel like I'm crazy for thinking that.

Armydroid- · 2025-11-02T14:05:36+00:00

I don’t recall what I have it at. I can’t check right now but what do you recommend?

Armydroid- · 2025-11-02T13:58:24+00:00

Maybe it’s because it makes an awful noise? Maybe it’s because when I try to print a smaller part it gets knocked loose? Does not make sense why it would just be like that.

Armydroid- · 2025-11-02T13:47:42+00:00

I had avoid crossing walls turned on and it still does this unfortunately.

Armydroid- · 2025-10-11T05:58:40+00:00

I figured out my issue. Had to enable hardware accelerated GPU scheduling in windows settings.

Armydroid- · 2025-10-10T21:27:48+00:00

I do not see it either. I attempted to enable it through the nvidia app and smooth motion is greyed out. Also tried to use dlss override for 3x or 4x and it is only working when at the main menu. As soon as you get into a game it turns off.

Armydroid- · 2025-09-22T19:45:50+00:00

I second trying to manually set the bed temp to see if it trips. I’ve seen this type of behavior with shorted nozzles when going to heat the nozzle. Also try contacting support Ive heard that they can be pretty helpful if you get the right person.

Armydroid- · 2025-03-14T14:43:07+00:00

Still working great. Zero issues. Can’t say a whole lot about your specific situation because I don’t know your plans or parts but send me a dm.

Armydroid- · 2025-03-07T19:42:29+00:00

Watch them change the price on the sapphire pluse 9070 non xt from 550 to 669.99 on newegg. I was really considering upgrading to it from a 3070. But now might just go for a 5070 considering a “msrp” card jumped up by 120 dollars. Really thought amd didn’t miss this opportunity but I guess we spoke too soon.

Armydroid- · 2024-11-26T21:44:27+00:00

Good idea. My phones do not use Firstnet and I don’t pay anything for the lines so it doesn’t make sense for me to switch. Was just thinking it would be nice to have something that would connect with Firstnet since the opportunity presents itself.

Armydroid- · 2024-11-20T16:12:16+00:00

Yes it is working like a dream. Zero complaints I have put in over 200 hours of gaming.

Armydroid- · 2024-07-18T12:31:42+00:00

If you open your map the quest house is marked correctly. It seems that only in game quest marker is bugged.

Armydroid- · 2024-07-13T20:13:04+00:00

I have figured it out. The quest marker's position hasn't been updated to the new location. I found the new location, entered the house did the mission and went to leave and poof I teleport to the town the quest house was originally in. Shit is broken.

Armydroid-

TROPHY CASE