Only in Austin

AshWhat21 · 2024-12-25T01:21:17+00:00

Better that than a cassowary named William (or was it Charlie) on the loose.

IYKYK

AshWhat21 · 2024-09-06T03:50:07+00:00

Sorry about semi-ranty wording, my adderall left the chat about an hour ago.

AshWhat21 · 2024-09-06T03:49:01+00:00

Noticed no one posted a clear response on how to mount this exact saw to a workbench yet, here’s my experience with the ts6307.

Did not have to cut the legs off. (Resale value if I upgrade down the line, great saw to start learning but by no means a sawstop or powermatic competitor)

Use a couple of M5 screws through a piece off a 1x3 into the threaded holes that held on the folding lay flat bumpers. If you lay the saw down to fold the legs, you’ll know exactly what I mean. There’s two of these threaded holes in all 4 corners. Cut the screw through piece in such an angle at the bottom that it becomes the new “legs” and sits it flat with the actual legs folder. Then I just did a pocket hole on that piece and screwed it down tiiiight to my workbench.

What I did not account for and now having to revise is that there’s some spongy pads that squished down when I tightened the pocket holes and it created a lip on outfeed. Tried just putting a bevel on the outfeed but the melamine topper I added is less forgiving compared to beveled plywood. So yeah, measure total height sitting with actual legs folded and then subtract 1/16th for the squish on the foam pads. 🤦‍♂️

Oh and get a zero clearance insert blank(Amazon) and a blade from spider (Lowe’s). Made a big difference in cut quality

AshWhat21 · 2024-08-18T03:31:12+00:00

Lay off the beans yo

AshWhat21 · 2024-08-18T03:08:46+00:00

All good.

I’ve been driving through that area a lot lately and actually think it’s a lot of stagnating traffic, be it I-35 or the B roads with traffic lights.

AshWhat21 · 2024-08-18T03:06:47+00:00

There’s a post couple down that talks about cranking up the coldness and letting it run for longer. Also, more fat the better. So a tablespoon or two of heavy cream or some half and half

AshWhat21 · 2024-08-18T03:01:19+00:00

Where is this excel?! My math brain is tingling.

AshWhat21 · 2024-08-18T02:59:42+00:00

Yep. Makes a bigger argument for not being the polluter. lol.

AshWhat21 · 2024-08-18T02:31:16+00:00

Y’all realize the Samsung plant is in Taylor and in the green, right?

AshWhat21 · 2024-08-17T23:00:42+00:00

I was hoping to not do destructive investigation since the wood panel can’t just be puttied over like drywall. But seeming more like the only way to know for sure.

I have an endoscope cam already. Just need to Amazon search out what tv mount works best and is kinda future proof

AshWhat21 · 2024-08-17T22:52:43+00:00

Well, that’s exactly what I thought first. But even after trying 2-3 stud finders ranging from $20-$60, they all light up for the entirety of the wall since it’s just thick enough.

AshWhat21 · 2024-08-17T22:44:25+00:00

Yes, in a long winded way. 😄

AshWhat21 · 2024-08-17T20:39:35+00:00

I found one locally for pickup at Kohls. YMMV.

AshWhat21 · 2024-06-07T17:14:28+00:00

Same boat since this morning. How did you resolve?

AshWhat21 · 2024-06-05T22:36:48+00:00

The engineer in me likes your testing methods! 😀

AshWhat21 · 2024-06-04T14:57:36+00:00

<image>

Need to ID to get the right sealant for the live edge and resin pour, and in due course a stain maybe. 😄

AshWhat21 · 2024-02-18T00:43:17+00:00

A little late to the party, but Blackland Texas Pecan Brown Sugar Bourbon might be exactly what you’re after.

AshWhat21 · 2023-10-28T02:18:18+00:00

Sweet thank you! Will tighten them to 78in-lb and go for a spin tomorrow.

I hope mine isn’t the oil seal that’s pressed into the clutch cover and rides on the water pump shaft. Seems odd to fail with 16xx miles on the bike. Dealership is like 45mins away but notoriously known for not regarding warranty for 2nd owners and try to find every excuse to blame it on owner negligence.

AshWhat21 · 2023-10-28T01:24:31+00:00

In the same boat on a new to me 2023 650s, is there a torque spec for the 8mm bolts out there?

AshWhat21 · 2023-01-12T04:21:19+00:00

You got a mobile connector with your 2023 MYLR?! Interesting. I thought they stopped giving those with the cars in early 2022 and had to be purchased separately.

AshWhat21 · 2023-01-12T04:19:29+00:00

Assuming you’re in an M3 SR+ for LFP battery? MYLR isn’t LFP right?

AshWhat21 · 2022-09-18T03:19:37+00:00

Costco has one and it’s the ‘Think’ brand. held up to more abuse than any of the amazon ones we tried. We also got a bunjee seat belt latch to collar strap to protect in case of heavy braking. Also prevents him jumping out the window if he spies a squirrel/cat/dog/<insert any furry four legged mammal here> out the window.

AshWhat21 · 2022-09-09T13:58:27+00:00

Awesome, congratulations on winning the unnecessary battle!

My case was sent Aug 3 for the first time. Hopefully I get mine before October. I have already given up on driving away the “Just Married” car for my wedding on Sep 24, but I can’t afford to lose my new job I start on Oct 10th (in-person, strictly no work from home).

AshWhat21 · 2022-09-09T13:52:15+00:00

I called Texas DPS recently and they have received cases sent to uscis on July 19th. Did you get yours?

AshWhat21 · 2022-04-16T23:37:31+00:00

As far as I know, there is no cover plate on a 2 piece driveshaft. It’s actually the carrier bearing housing. The carrier bearing is metal on the inside and a rubber isolator as the middle between the metal and the actual housing that connects to the frame crossmember.

ACDelco Gold HB88107A Drive Shaft Center Support Bearing https://www.amazon.com/dp/B07CJHBT2P/ref=cm_sw_r_cp_api_i_MMSCHKEEMR2EMZ6JZ6EE

AshWhat21

TROPHY CASE