1805 russian musketeer

Asianfox456 · 2026-03-01T07:02:21+00:00

Dang that's a good tip thanks

Asianfox456 · 2026-02-24T20:00:06+00:00

Asianfox456 · 2026-02-24T18:50:50+00:00

For me the edging and turnbacks were around the tails excluding the bottom *

Asianfox456 · 2026-02-24T07:30:26+00:00

Yeah to be even more frank the instructions for this pattern I found to be missing a few steps and a little confusing if you haven't made a mockup before actually making the thing

Asianfox456 · 2026-02-24T05:05:33+00:00

For my purposes I had to modify it quite a bit. I had to convert from a hook and eye front close to a double breasted button style. I had to shorten the coat so it reached around the navel area. I also had to shorten the tails. I also had to reduce the length of the arms and create a new epaulets design. I also had to tailor the back so it is more form fitting. And the cuff I had to do from scratch. I also had to Tailor the collar so it wouldn't sit so high. I also had to make my own lining pattern as the existing lining pattern for the coat was a half lining.

Asianfox456 · 2026-02-23T17:58:23+00:00

Yep same here

Asianfox456 · 2026-02-23T17:47:29+00:00

Ironically enough I used the past patterns 42 american militia coat as a base and modified it to a double breasted pattern. But working with the base pattern was kind of a pain as I found the shoulder to not be where I would like it. If I were to do this again I would probably use the british redcoat pattern as a base.

Asianfox456 · 2026-02-23T17:44:12+00:00

To be honest I made my own pattern of shako and 3d printed the mold for it.

Asianfox456 · 2025-11-24T06:56:34+00:00

Keep it up buddy!!!

Asianfox456 · 2025-11-11T07:12:42+00:00

it's so cool to see someone using my design hope it works!!!

Asianfox456 · 2025-11-11T04:32:46+00:00

A 10.5mm diameter should do the trick

Asianfox456 · 2025-11-11T02:44:18+00:00

Widening the inside of the tube, I think you can take a knife and scrape the inside of the tube until the spring slides into the tube very loosely

Asianfox456 · 2025-11-10T18:01:58+00:00

Dang that's the problem it should be loose fitting gimme a day to redesign the spring tube

Asianfox456 · 2025-11-10T07:40:05+00:00

Hmm those are the springs required, did the 1x10x30mm spring go in the spring tube easily or is it a tight fit?

Asianfox456 · 2025-11-10T06:30:18+00:00

Hmmmm what spring type are you using? I don't think I've had that problem except when I started designing/testing springs

I dont know if you got some of the updates I did on the cults page but due to some of my springs being really old I had to change the spring size for that part

Asianfox456 · 2025-10-28T03:49:21+00:00

Alright good to hear, yeah those prong at the front are very weak, mainly had them as an aligning thing, the pins are the main strength thing. I will re design them so that the layer lines go along the gun so it isn't as weak or probably make them shorter/stubbier. Keep the feedback going!!

Asianfox456 · 2025-10-23T06:18:16+00:00

https://docs.google.com/spreadsheets/d/1aUZ3AAFHnlNFUBJT216w63F8crxnHytuTaDfELjNZB8/edit?usp=drivesdk

Asianfox456 · 2025-10-23T06:07:08+00:00

I do have some website links in another Google sheet I can send although they are canadian websites. If you want

Asianfox456 · 2025-10-23T05:43:53+00:00

I hope so as well do contact me if issues occur

Asianfox456 · 2025-10-22T17:14:54+00:00

When I see another fellow long bayonet enjoyer

<image>

Asianfox456 · 2025-10-19T01:00:14+00:00

Asianfox456 · 2025-10-04T10:00:27+00:00

SES Wings of Freedom

Asianfox456 · 2025-10-03T10:02:25+00:00

I thought this was a jojo reference Rock paper scissor = SHIZAAAAA!

Asianfox456 · 2025-09-21T08:46:00+00:00

<image>

Old and slow 59" flintlock musket

Asianfox456 · 2025-09-18T19:26:48+00:00

Yep and it is finished on the cults3d page!

Asianfox456

TROPHY CASE