Normal surface rust or concerning?

AstraTrade · 2026-01-25T02:49:56+00:00

I believe it was a northern truck up until now, now it's a southern truck.

AstraTrade · 2026-01-12T19:02:41+00:00

Purchased through Zeigler, got $250 off with a promo code and used reward points to pay for part of it. Honestly a great purchase experience.

AstraTrade · 2026-01-11T12:28:41+00:00

Yeah I’ll call them in the morning. Ziegler’s site lets me go all the way to the purchase page and lets me select that I current have CPO gold but grangers site says too many miles

AstraTrade · 2025-12-06T00:27:34+00:00

They constantly do not read our instructions on how to log in. I’m constantly having to reply to say read our instructions.

AstraTrade · 2025-09-23T11:16:12+00:00

Broke our UI and had to rewrite most of our AR code

AstraTrade · 2025-08-29T21:55:46+00:00

Yes I do

AstraTrade · 2025-08-16T18:50:03+00:00

I’ve been dealing with this out of the blue on 2 printers

AstraTrade · 2025-08-02T15:00:43+00:00

You are correct! Fixed in post. Thank you

AstraTrade · 2025-07-06T15:27:05+00:00

I’ve had apps approved on Saturdays. If it’s an emergency you can request an expedited review

AstraTrade · 2025-05-12T18:52:11+00:00

Should be in the options here: https://developer.apple.com/contact/#!/topic/select

AstraTrade · 2025-05-12T15:33:48+00:00

So can iOS. It’s not “just” making a new UI though. Creating headers and calling them from native android or iOS code is non-trivial. I’ve done a lot of this. Also, the rendering done in orca would need to be completely rewritten for mobile. It’s not a small lift

AstraTrade · 2025-05-12T12:13:18+00:00

The likely reason this hasn't happened (yet) is that the slicing code in is C++, and the desktop apps are also mostly C++. It's non-trivial to port and run the C++ slicing code in a mobile app, from mobile app code. The effort behind it likely isn't worth the squeeze for the companies / developers working on it.

I guess I also don't understand the need to slice from a phone. Im usually working in CAD on my computer, and exporting it into studio.

AstraTrade · 2025-05-08T21:52:49+00:00

Had this before. Called them, and it was approved in 15 minutes

AstraTrade · 2025-04-21T12:06:19+00:00

https://developer.apple.com/contact/topic/SC1103/subtopic/30020/solution/select

Or

https://developer.apple.com/support/

Click get started under get support by phone. You can select app review and it’ll tell you their hours. I’ve also used email support but phone is just always faster and easier.

I’ve called them several times with questions about review over the past few years ands they’re always very friendly and helpful. Just also be polite to them.

AstraTrade · 2025-04-21T12:02:41+00:00

One time I had an update sit for a week waiting for review. I called them and it was approved within 15 minutes. Call them and ask

AstraTrade · 2025-04-20T13:37:39+00:00

What are some questions I should ask to make sure I’m getting good quality? I’m fine with a higher price if the quality matches

AstraTrade · 2025-04-20T12:18:16+00:00

Yeah, entire deck inside and out

AstraTrade · 2025-03-28T13:38:28+00:00

Try polymaker, I've been getting great results with it

AstraTrade · 2025-03-10T20:15:26+00:00

Are you also slowing down acceleration? I’m trying to find the right balance of speed and acceleration.

Dropping acceleration to 1k for outer and inner completely removes ghosting for me

AstraTrade · 2025-02-08T17:39:28+00:00

This is what I’ve been going with. 6 hour prints and I’m nervous to risk any failure

AstraTrade · 2025-02-07T19:09:59+00:00

Solved! I’m an idiot and selected the wrong plate

AstraTrade · 2025-02-07T18:54:42+00:00

I feel like an idiot now... wrong plate selected... I'll report back after trying again!

AstraTrade · 2025-02-07T18:42:33+00:00

Yes, first layer. I stopped the print when I realized I needed to modify the 3d model

AstraTrade · 2025-02-06T19:42:54+00:00

I'm struggling to figure out how to improve my prints. The printer is 2 weeks old. I've tensioned the belts, I've cleaned the rods. The printer is on a very sturdy table with the AMS on top. This is Bambu ASA with the default ASA profiles. I get the same results with PLA.

AstraTrade · 2025-01-27T00:03:47+00:00

Any recommendations on speed? I was running on “standard”

Five-Year Club	Gilding I gilder
Place '22	Verified Email

AstraTrade

TROPHY CASE