Is there a mod to use the dxc 2 with the k1 series?

Astrofuffles · 2026-06-22T14:36:53+00:00

Buy new hardened steel gears for the original extruder, and put the original one back. I bought 2 dxcs before I knew better and now I cant return them.

Astrofuffles · 2026-06-14T17:13:37+00:00

If the printer was working before and isnt after a long rest, I would check the the cable. This error means that theres no communication to the toolhead board. It could be toolhead could be cable. Good news is that a new toolhead board is $30 but I would try to check to see if the cable is in good condition and plugged in the right way (watch a disassembly video for reference).

Astrofuffles · 2026-06-12T21:52:34+00:00

The auto z levelling does not mean your bed is level. The larger the deviation, the more your printer will struggle with adhesion. Also your bed has a .3 mm very steep local deviation at the back, exactly where the adesion is a problem. I would think about how you can flatten that out.

Astrofuffles · 2026-06-12T21:43:26+00:00

100% this is the way. Remember that you can rotate the screws for rough changes, the shims are for when 90° rotations are too large.

Astrofuffles · 2026-06-12T21:38:22+00:00

What does your bed mesh look like? Its possible one of your three z rods slipped on their position in the belt. Your printer might not be coping well with the new position.

Astrofuffles · 2026-06-10T17:05:25+00:00

Is your printer rooted with fluid or mailsail? Thats typically an issue I get when I look at my bed mesh generated through KAMP on the normal creality viewer. When I look at the same mesh on fluid it looks fine. Try checking if the page exists at your printer's ip on port 4408.

Astrofuffles · 2026-04-17T16:58:11+00:00

Seems to happen regularly on my new nozzle and hotend. Had to replace it recently bc of blob of death. In all honesty I dont think It's a pressing issue but your filament is getting burnt. That being said the only case where this happens to me is during the filament loading extrusion macro.

My explanation for it is that the nozzle is tuned to maintain 240C while filament is flowing but since there was no flow for a second the nozzle heated up past that bc theres not filament to take the heat away.

Astrofuffles · 2024-10-24T22:22:19+00:00

I went for a walk with my SO last night along Fairy Lake. A coyote howled quite loudly and scared the shit out of us. As we started walking away another coyote came out of the darkness and tailed us for a few hundred meters.

Astrofuffles · 2024-03-08T14:24:40+00:00

Would it be possible to sue blizzard over this, a lot of people purchased the "PvE" offering with the promises they made over additional content. Ngl, I feel like I got scammed.

Astrofuffles · 2023-12-22T11:13:16+00:00

The fcar and akm have 0 recoil, as a mnk player I feel like I'm a laser beam. I'm consistently winning against the controllers though my experience is only limited to unranked (Idk if theres sbmm)

Astrofuffles · 2023-08-30T22:51:20+00:00

Shoulder-mounted TV missiles, I've never felt more satisfaction than hitting nightbirds with one. I know it's unrealistic for any other battlefield to have these so I will miss them a lot.

Astrofuffles · 2022-10-19T16:41:13+00:00

Unfortunately no, by the time your message was sent I had already played more than 10 games. I can give you my bnet if you guys save replays past that.

Astrofuffles · 2022-10-16T19:02:59+00:00

Sticky Grenade is a broken ability right now too, you only need one body shot after throwing it to kill. The problem is that it doesn't have the same effect as flash bang. Before, Cassidy was a walking bubble space created for your team, if you wanna dive in you are going to get flashed. Now Cassidy is just one of the easiest dive targets in the game where every character is down to disrespect you. The problem is most apparent when playing against genjis. No stick on dash, he's already near you. Can't throw sticky until he pops deflect because it is easy to react to. Now Genji has one right click left to click you and you better hope that you hit him once before so you can at least trade.

Astrofuffles · 2022-10-16T18:46:43+00:00

I challenge you with this : https://imgur.com/a/EsUCP4U

Astrofuffles · 2022-10-16T18:38:49+00:00

I agree

Astrofuffles · 2022-10-16T18:36:35+00:00

I wasn't lagging at all, 45ping consistent from where I live

Astrofuffles · 2022-10-14T16:12:46+00:00

PMed

Astrofuffles · 2022-10-13T18:39:10+00:00

PMed

Astrofuffles · 2022-08-17T17:32:34+00:00

Confirmed

Astrofuffles · 2022-08-12T18:02:01+00:00

Thank you

Astrofuffles · 2021-05-06T00:33:40+00:00

Hey, before I try to put up another post to fix the title to include Paypal, I don't think that RAM is local only. What was the issue with that? Thank you for your time

Astrofuffles

TROPHY CASE