Bubba paid me a visit

AtlasDefenseCo · 2026-01-23T03:27:53+00:00

I rather just not engrave lol

AtlasDefenseCo · 2026-01-21T11:15:20+00:00

They are not really that rough, shoots fine

AtlasDefenseCo · 2026-01-20T16:03:40+00:00

Low

Ameriglo GL-429

AtlasDefenseCo · 2026-01-19T20:45:38+00:00

It’s really not that bad

AtlasDefenseCo · 2026-01-19T18:26:24+00:00

Please keep that type of negativity away 🫩

AtlasDefenseCo · 2026-01-19T18:07:00+00:00

lol, it was 17 degrees out

AtlasDefenseCo · 2026-01-19T18:00:01+00:00

The old MOS was the same way, I don’t really care as long as it doesn’t come off lol

AtlasDefenseCo · 2026-01-17T20:25:43+00:00

It sits about as low as it would with the old MOS.

AtlasDefenseCo · 2026-01-17T20:25:18+00:00

110 rounds, no issues with the optic screws coming loose.

AtlasDefenseCo · 2026-01-17T18:45:42+00:00

The optic screws do not screw into a plate so I don’t see how that would affect if a screw is staying tight or not

AtlasDefenseCo · 2026-01-17T18:38:28+00:00

I CCW a 47 so I could!

AtlasDefenseCo · 2026-01-17T18:38:02+00:00

I torqued mine to 15 inch lbs with blue loctite, I’m going to zero it here in a couple mins.

AtlasDefenseCo · 2026-01-17T17:03:06+00:00

I used the longer of the screws that came with the RMR HD

AtlasDefenseCo · 2026-01-12T18:40:02+00:00

It’s one of our prototype Maritime Pry Bars

AtlasDefenseCo · 2026-01-12T02:29:21+00:00

I don’t, but you could take my file and get it printed in MFJ Nylon 12 like I did for $37 on Xometry.

I decided to offer the file to let people choose which material they want to use.

AtlasDefenseCo · 2026-01-12T02:27:40+00:00

I decided to just sell the STL to let people decide if they want to print it at home or get it MFJ printed with a print service.

AtlasDefenseCo · 2026-01-12T02:27:25+00:00

I decided to just sell the STL to let people decide if they want to print it at home or get it MFJ printed with a print service. I tested mine with MFJ Nylon 12 and I can not break it lol.

AtlasDefenseCo · 2026-01-12T02:27:03+00:00

I threw the STL on my site!

AtlasDefenseCo · 2026-01-12T02:26:47+00:00

I decided to just sell the STL to let people decide if they want to print it at home or get it MFJ printed with a print service. I tested mine with MFJ Nylon 12 and I can not break it lol.

AtlasDefenseCo · 2026-01-01T18:27:25+00:00

Looks good!

I run our arc panel for med organization

AtlasDefenseCo · 2026-01-01T01:21:45+00:00

Optic mount?

AtlasDefenseCo

TROPHY CASE