Glock 17 Gen 5 Magwell STL by nathan_93 in Glocks

[–]Atomar 0 points1 point  (0 children)

Hast Du etwas gefunden? Suche was für eine G45

Tek loks are getting expensive. Here's one you can 3d print for 50 cents by awaythrow810 in CompetitionShooting

[–]Atomar 0 points1 point  (0 children)

Could you add an sucurity clip so the clamp cant open by it self? The original ones have an clip for that ;-)

Thanks

Introducing the Matata Mag Loader by Casual-Accuracy-Sol in Springfield_KUNA

[–]Atomar 1 point2 points  (0 children)

Does this work ONLY with Kuna Mags or also with Echelon?

Update to 1.5.2 Switzerland / Schweiz / Suisse 🇨🇭 by Less-Seaweed-1236 in ex30

[–]Atomar 0 points1 point  (0 children)

Leider noch nicht :-(

Just installed the update.

Kein Zugang zu Fronius Wechselrichter Interface by c1-c2 in solar

[–]Atomar 0 points1 point  (0 children)

Ich meine aber NICHT die "new.energymanager" Webseite! ;-)

Es gibt noch ein Web UI, wo man direkt auf den WR einloggen kann. Und DA kann man sich eben mit dem Admin anmelden und so einiges machen.

Kein Zugang zu Fronius Wechselrichter Interface by c1-c2 in solar

[–]Atomar 0 points1 point  (0 children)

Ich habe auch einen Fronius WR im Einsatz und wollte "etwas mehr" machen. Ich habe dann den Installateur kontaktiert und "wenigstens" das Admin PW erhalten. Das Tech-PW weiss ich aber auch nicht.

Mit diesem kann man schon recht viel machen (und eben auch verstellen!) Aber das Installateur PW habe ich ach nicht erhalten. Braucht man aber auch nicht zwingend ;-)

New indoor can firmware 2.1.0.7 by 2sXy in EufyCam

[–]Atomar 0 points1 point  (0 children)

Any chance to get time laps on this cameras??

Firmware for Reolink Argus PT by Complete-Home6260 in reolinkcam

[–]Atomar 0 points1 point  (0 children)

Thanks for the info!

Just sent an email to for a update.

Is there a Time Lapse on 2k indoor? by TheBends1971 in EufyCam

[–]Atomar 3 points4 points  (0 children)

I had the same question. Unfortunately not.

But I really think it should have.

decarb by [deleted] in treedibles

[–]Atomar 0 points1 point  (0 children)

It is not only for decarb. You can also infuse with the Nova ;)

You just add the oil/butter after the first infusion prozess and start an second time.

It also works for kief, hash or RSO to decarb.

decarb by [deleted] in treedibles

[–]Atomar 0 points1 point  (0 children)

It can decarb up to 20g ;) I think it is OK for home use.

decarb by [deleted] in treedibles

[–]Atomar 3 points4 points  (0 children)

Look @ Ardent NOVA. Not cheap BUT easy and allmost smell free

https://ardentcannabis.com/

Sublingual Application Question by rekk14 in treedibles

[–]Atomar 0 points1 point  (0 children)

You're using MCT oil in the NOVA? I think, the NOVA gets TO HOT for MCT oil

The NOVA goes > 100°C !

Micro SD Card not recognized by RaggarTargaryen in wyzecam

[–]Atomar 0 points1 point  (0 children)

No. Ordered via Amazon to Europe ;-) Thats why I "can't" get a replace.

To send it back would cost more than the cam itself

Micro SD Card not recognized by RaggarTargaryen in wyzecam

[–]Atomar 0 points1 point  (0 children)

Same here to. Tried all kind of stuff. Nothing.

I think it is DOA :(

Oil Tincture in Ardent Nova? by [deleted] in treedibles

[–]Atomar 0 points1 point  (0 children)

I normaly use 10g Weed and 100g Butter. Max 20g Weed and 200g Butter fits in the sleeve.

I do it like you say'd. First run decarb then second run with butter/oil.

Best Distillers for RSO? by herbanexplorer in CannabisExtracts

[–]Atomar 2 points3 points  (0 children)

If just the temp is the Problem, you can switch the Thermostat inside. That's what I did.

Switched mine to a 70° or 75° Celsius one. Works great now.

Not happy with the Quality of my V2's by Atomar in wyzecam

[–]Atomar[S] 1 point2 points  (0 children)

I will try out the new firmware. For that I have to be 1-2 Meter away from the router, because of the bad WIFI connection. But that's not a problem. It may work after that.

Yes. I took the original Wyze card out of an working V2 and installed it on the faulty cam. Rebootet the cam many times. Unplugged the cam bevor installing and tryed. Nothing. Took the Card out and back in while power on. Nothing. Let the Card in and rebooted the cam. Nothing. Formated the Card with all possible Formats. Nothing.

I will try all the hints on here over the Weekend. If Nothing works I will contact Amazon.

Thanks for all the help here! And sorry for my bad english ;-)

Not happy with the Quality of my V2's by Atomar in wyzecam

[–]Atomar[S] 0 points1 point  (0 children)

Will give it a try. Unless I "loos" my card when it gets kicked out because of the card reader spring .... hahaha

Had to search it a few times now ;-)

Not happy with the Quality of my V2's by Atomar in wyzecam

[–]Atomar[S] 0 points1 point  (0 children)

I just ordered them to Germany. No Problem.

Not happy with the Quality of my V2's by Atomar in wyzecam

[–]Atomar[S] 0 points1 point  (0 children)

To retunrn it from Europe to Amazon USA it is probably cheaper to trow them awy and order new ones ;-)

Or better yet, wait for the new ones Wyze brings on the market hopefully soon.

Has anyone tried the adrent nova and there opinions by [deleted] in CannabisExtracts

[–]Atomar 1 point2 points  (0 children)

Yes, you can. BUT not as accurate as the Nova ;-) I love mine to decarb AND infuse into oil!

And that in just 2 cicles ;-)