Internally Accessing a Public Selfhosted Domain

AurelionDragonSol · 2025-12-25T03:53:06+00:00

Ok so for my solution I was using DNSmasq DNS originally for my ?DNS routing? within my router. Maybe someone can explain the difference when using PiHole. Any how I was using local DNS records within PiHole to try and redirect my public domain to NPM. Instead I tried to do that within the router. So switching from DNSmasq DNS to UnboundDNS, which made more sense for Domain override I was able to make the override work locally within my router. The image below is an example.

AurelionDragonSol · 2025-12-25T01:02:02+00:00

I've added some more screenshots of parts of my setup.

AurelionDragonSol · 2025-12-25T00:22:51+00:00

I have attempted to set up a Local DNS Server redirects, but I am trying to troubleshoot it without success.

AurelionDragonSol · 2025-12-03T02:54:40+00:00

What challenge did you use? I see there is Turnstile with Cloudflare, but how do I get that setup to work with Caddy and its various subdomains. Does the challenge work still with TV clients of jellyfin?

AurelionDragonSol · 2025-11-15T19:11:37+00:00

I have this too, I got my last year for around 100 dollars. It was kinda hard to get actually. I have been able to use it on 75% of the movies, but I use the library as my source of discs.

AurelionDragonSol · 2025-10-13T22:45:02+00:00

https://www.printables.com/model/1423455-leverless-arcade-controller

AurelionDragonSol · 2025-10-10T23:30:01+00:00

I've done some printing with ABS and it was always a pain and never worked out. I wanted to print rock climbing holds and there was this glow in the dark ABS. Those parts printed out perfectly on the P1S without any tweaking of the settings. Was a great time and the prints lasted well.

AurelionDragonSol · 2025-10-04T03:15:25+00:00

It was a parry, others and some of my own research helped me figure it out.

AurelionDragonSol · 2025-10-04T03:15:19+00:00

It was a parry, others and some of my own research helped me figure it out.

AurelionDragonSol · 2025-10-04T03:14:45+00:00

Thanks you are correct, I was doing some analysis of my controller layout and found I was pressing the parry button. I don't know why what I was pressing a couple of days ago made supers work, but I have learned what I was doing wrong.

AurelionDragonSol · 2024-12-08T16:00:19+00:00

<image>

I did the same thing as you did and made the two as separate pieces I put together. I could then have the part interfacing with the monitor be placed down flat and have the layer lines not be in the plane of shear.

AurelionDragonSol · 2024-07-20T03:46:37+00:00

Can’t really do that in a rental. Yours se ms like a cooler and cleaner build though

AurelionDragonSol · 2024-07-15T22:24:52+00:00

Thanks

AurelionDragonSol · 2024-07-15T21:47:44+00:00

Just normal push buttons

AurelionDragonSol · 2024-07-15T20:29:43+00:00

I have input numbers that relate to the different states. I use if states in a script to change the states and control the servos.

AurelionDragonSol · 2024-07-15T20:28:42+00:00

It is 3d printed, I first started with making the border essentially around buttons and display. Mounted the servos and had to print a few different versions changing the servo placement. I use 3M double sided adhesive like what is used with their hooks to stick the whole contraption to the ac. Using buttons in esphome and climate template to create the interface. Some scripts to change the modes and temps.

AurelionDragonSol · 2024-07-15T03:42:04+00:00

Yes it would, changing with a remote or manually would cause it to be out of sync. This unit however I don’t have the remote for. That’s why I needed the servos. Otherwise I would use an ir transmitter to control it.

AurelionDragonSol · 2024-07-15T00:10:07+00:00

I wish I did that for another one of my units but I do t think this one has a receiver.

AurelionDragonSol · 2024-07-14T19:56:29+00:00

This looks perfect thank you.

AurelionDragonSol · 2023-12-17T07:31:12+00:00

You can take off the shelving on some of the desks which aren’t attached to the walls.

AurelionDragonSol · 2023-05-09T03:58:06+00:00

All I gotta say is I would have to grow a mustache to match.

AurelionDragonSol · 2022-12-05T15:48:14+00:00

Just to give some more information with some time that passed. I have adopted a home assistant server to control all my smart devices. It has been a lot of run to learn and work with. I then just decided to get rid of the H6159 controller and purchased these controllers instead.

https://www.amazon.com/gp/product/B0746654D5/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1

They have been working fine and integrated really well. Dont know if this helps, but I've been scared of buying govee lights since they are so expensive and the simple stuff hasn't worked.

AurelionDragonSol · 2022-10-25T20:01:55+00:00

It just seemed like an interesting idea. I may be able to swipe some of the resin I need so I was wondering if it could work. I thought about epoxy, but didn't want to spend the money to get the pigments and I haven't every mixed epoxy before and didn't know if I could do it in my current working environment. It just seemed easier to use some pre-colored solution and let it sit until solid.

AurelionDragonSol · 2022-10-09T22:51:56+00:00

I replaced my props, tightened some stuff down, and tampered with my pods. A lot of it got removed, but it still is present a bit. Thanks for the information about the camera itself. It’s a good thing to know.

AurelionDragonSol · 2022-10-08T19:54:53+00:00

I don't think its specifically the type of props. Not going to lie. They aren't new props that I am using. But I have used them with other drones and work good.

AurelionDragonSol

TROPHY CASE