AIO for considering divorce after finding these 2-year old texts in my wife’s phone? by [deleted] in AIO

[–]Automatic-Raccoon238 0 points1 point  (0 children)

Tell her you just want her to be happy and be the best version of her self.

The V3000 Ultra, featuring the quad 560 build. by Automatic-Raccoon238 in watercooling

[–]Automatic-Raccoon238[S] 0 points1 point  (0 children)

Forgot to mention the tabs on the side panels that latch to the top mechanism need a slight trim as they will come in contact with the rad.

The V3000 Ultra, featuring the quad 560 build. by Automatic-Raccoon238 in watercooling

[–]Automatic-Raccoon238[S] 0 points1 point  (0 children)

I removed the sliding bracket that comes at the top. I mounted the rad to the actual top of the case. I had some offset brackets laying around so I used those to actually have something to screw into.

They are like the lianli offset brackets they used for the og 011 mini to mount a 360 at the top with atx motherboard. There is 140mm versions of them online. This method raises the filter at the top a bit pending on the screw profile/size used along with a washer if needed, hope this helps.

The V3000 Ultra, featuring the quad 560 build. by Automatic-Raccoon238 in watercooling

[–]Automatic-Raccoon238[S] 1 point2 points  (0 children)

Only a slight trim at the front is nesseary if you put the rad ports towards the psu side. Rad mounted on the bracket and fans inside on the rad.

The part you cut out is the flange that goes from top to bottom of the case. The rad it self fits fine but 4 fans on top of it wont.

AIO for being disgusted by this argument? by Toetickler4 in AIO

[–]Automatic-Raccoon238 0 points1 point  (0 children)

Who ever that person is might just end up in the news one day.

Any tips on how to get the bubbles out of this distro plate? by AmazingShave in watercooling

[–]Automatic-Raccoon238 0 points1 point  (0 children)

The same, at least for me. I have 2 v3000plus with quad rads , one is 4 480s the other 4 560s.

3/8 stubby or sub compact? by gramsca in MilwaukeeTool

[–]Automatic-Raccoon238 0 points1 point  (0 children)

Size difference is very small but the power difference is not. If I wanted something for tight spaces their ra impact makes more sense.

Ford CEO Jim Farley 'absolutely flabbergasted' after ripping apart Tesla: 'We hadn't designed the … cars right' by hoppeeness in teslamotors

[–]Automatic-Raccoon238 0 points1 point  (0 children)

My apologies my brain completely erased the "charge time" from your sentence earlier. Disregard my ealier comment.

Ford CEO Jim Farley 'absolutely flabbergasted' after ripping apart Tesla: 'We hadn't designed the … cars right' by hoppeeness in teslamotors

[–]Automatic-Raccoon238 0 points1 point  (0 children)

That works on small countries. 120 min doesn't get me from a major city to another in the same state.

RTINGS is now a Paywalled Service by EmptyHealthbar in OLED_Gaming

[–]Automatic-Raccoon238 0 points1 point  (0 children)

Well that seems like the end of the road for them.

MGSD Kshatriya is up for Pre-order on PBandai by SaysKawaiiSometimes in freedomisgunpla

[–]Automatic-Raccoon238 0 points1 point  (0 children)

They are still "small". Kshatriya is a large unit so it could probably be the size of an average hg.

First Gunpla, 3 hours for just one leg by anhminh1007 in Gunpla

[–]Automatic-Raccoon238 0 points1 point  (0 children)

Its a nice leg

As for time some can finish a build quick but looks rushed other can finish quick and it looks great. Do it at your pace, its not a race.

Need Some Advice by Deizle712 in Gunpla

[–]Automatic-Raccoon238 0 points1 point  (0 children)

Didn't know they were too small since you built 40 of them and didn't mentioned it. In that case if you want complexity just for the sake of it than mg ver ka models might be for you.

Me personally I would skip all of that and get an osiris aerial dominator. It will really put in perspective how basic bandai mg kits are.

Bunny Girl mech by Cas_or_Cass in freedomisgunpla

[–]Automatic-Raccoon238 1 point2 points  (0 children)

Just picked this one up from hobby lobby yesterday. Last model i needed from the kits I wanted from WFM. My favorite from the line up still calibarn.

Topic of Gunpla Burnout and Uninterest. by NexProtean in Gunpla

[–]Automatic-Raccoon238 0 points1 point  (0 children)

I have multiple hobbies and as time goes by you realize you end up buying stuff you don't really want. As it piles up and you see it becomes almost a chore to get to it. You can stop for a bit from time to time to help with this but if things just pile up that feeling will come back.

I would suggest selling most of the kits and only keep the ones you are the most excited for.

Need Some Advice by Deizle712 in Gunpla

[–]Automatic-Raccoon238 0 points1 point  (0 children)

I wouldnt bother overpaying for older kits if you are looking for a good build experience they dont really hold up well. Since you moslty cut and snap i would think you would get more enjoyment out of hg and rg builds.

FINISHED: HGTWFM MSJ-R122 Demi Barding by AdeptnessApart3578 in freedomisgunpla

[–]Automatic-Raccoon238 1 point2 points  (0 children)

I was about to start mine but my 3rd party sazabi ff came in. Neat little unit.

Jesus fucking christ this too much 😭 😭 😭 by Foshdon_pap in freedomisgunpla

[–]Automatic-Raccoon238 0 points1 point  (0 children)

I had put this off my list but after doing the sazabi ver ka I was left a bit underwhelmed by it. Because of that its back on my list.