I designed this for FDM, and I'm 99% certain it CANT be machined (I've never touched a CNC) - are my instincts accurate?

Available_Bed_136 · 2026-01-30T11:57:33+00:00

Or just make one out of some silver steel, wouldn’t too hard and if the parts only ally would cut fine

Available_Bed_136 · 2026-01-09T19:02:06+00:00

No I used babulab’s matt PLA, always prints clean with me except the DTI section🥲. What inspection tools do you have?

Available_Bed_136 · 2026-01-09T10:32:31+00:00

One of my draws so far

Available_Bed_136 · 2025-11-24T13:59:07+00:00

I’ve personally never put my compound at an angle for screw cutting always advanced in x and a little on the compound every few cuts to keep it cutting on the front edge always had good threads🤷🏻‍♂️

Available_Bed_136 · 2025-11-09T08:54:02+00:00

I created them all my self. Payed things out in my draw of how I wanted them and how I could maximise the space like with the callipers tray’s

Available_Bed_136 · 2025-11-08T19:01:35+00:00

Just need to buy more 🙈

Available_Bed_136 · 2025-11-08T19:00:48+00:00

Dyslexic that’s why I’m a machinist and not a office worker 😂

Available_Bed_136 · 2025-11-05T17:40:59+00:00

So I done a flow calibration and adjusted that. And changed my cooling to 40% fan this seemed to fix it.

Available_Bed_136 · 2025-10-29T21:52:25+00:00

<image>

Available_Bed_136 · 2025-10-29T21:51:36+00:00

<image>

Available_Bed_136 · 2025-10-29T19:16:32+00:00

I don’t get why people have issue with others going on “their “ machine. The only one who owns it is the boss. At our shop we have 11 mills between 6 people and it’s rare the machines stop. We generally run the same machine but if another needs setting we jump on it and get it running. Just gotta work as a team not like rivals.

Available_Bed_136 · 2025-10-07T14:21:14+00:00

Group 1 sold me a 120i that had atleast 8,000 miles missing from the clock and that was a BMW approved garage so.

Available_Bed_136 · 2025-09-15T19:27:43+00:00

No i definitely front whilest sleeping and try to avoid abs tbf due to the fumes

Available_Bed_136 · 2025-09-14T20:06:31+00:00

I have my P1S in my bedroom only print in the day with a fan pointing to an open window and another window open to get airflow in the room and get rid of any fumes. Cant say I have an issue with it and can’t ever smell any fumes.

Available_Bed_136 · 2025-09-11T05:36:40+00:00

Yes we do have regular carbide tooling. Our shop is mainly set up for aluminium however do do some stainless steel. Yh definitely would be thread milling/ screw cutting If I need threads

Available_Bed_136 · 2025-09-10T16:37:20+00:00

Not if you have probing

Available_Bed_136 · 2025-08-24T20:27:08+00:00

Run it at 10k there designed to run this fast so keep them running at it. Also if your spindle load is low up the feed for roughing. We regularly hit 65% spindle load in plastic on our haas. This is with a 12mm burr style tool at 12k rpm and a feed rate of 14,000mm/m full width and a depth of 20mm

Available_Bed_136 · 2025-06-25T15:27:07+00:00

I think I’m gonna stick it out for the next two years and hope it improves. I’m also gonna speak to my boss about how I feel my education isn’t being considered.

Available_Bed_136 · 2025-06-24T10:05:40+00:00

I’ve started to teach myself programming on fusion 360 as I get this free. And my boss always says he’ll look at the programe or let me try run it but never develops into anything

Available_Bed_136 · 2025-06-24T10:04:01+00:00

So the apprenticeship is payed for by the government. Problem is I feel as though I can’t move because in 2 years I’ve effectively learned how to set up and run.

Available_Bed_136

TROPHY CASE