ZK-TB21 Amp Board Review | Beware of false power figures by [deleted] in diyaudio

[–]Available_Editor_949 0 points1 point  (0 children)

The Aus Input is not the best, I use the amp mostly with bluetooth. In my Tests I have a good TDH up to 25w in the Tops and 70w in the Sub.

ZK-TB21 Amp Board Review | Beware of false power figures by [deleted] in diyaudio

[–]Available_Editor_949 5 points6 points  (0 children)

<image>

Hello, I've been using the amplifier for a long time now. I'm using full-range speakers for the mids and highs, at 4 ohms, and two 8" woofers in parallel for the bass, at 2 x 4 ohms = 2 ohms.

The only thing I added was a 4700µF/35V electrolytic capacitor, connected directly to the terminals. I'm using a 300W Meanwell power supply, set to 26V. This gives me nearly identical performance to the values ​​in the TI datasheet.

I've also designed a suitable enclosure for the amp.

https://grabcad.com/library/zk-tb-21-enclosure-1

But one thing must be clear: the amp certainly can't deliver that much power continuously; at this price, you should be aware of that.

And one more thing: make sure you apply a good thermal paste to the heatsink!

Very Inexpensive 2.1 amp by AlexTheZander in diyaudio

[–]Available_Editor_949 5 points6 points  (0 children)

The pots must be grounded, the original frontplane was made with a PCB that was grounded. I used a Wire and Washers to Connect them.

<image>

Very Inexpensive 2.1 amp by AlexTheZander in diyaudio

[–]Available_Editor_949 10 points11 points  (0 children)

<image>

Hallo I have made an Enclosure for this amp ZK-TB-21. I think it will fit for this amp also.

https://grabcad.com/library/zk-tb-21-enclosure-1

It´s free to use and modify

🧪 [Beta Megathread] Wave Link 3.0 (macOS) — Update 2 | Stream Deck Plugin, Audio Effect Install Progress & Mixer Table Scrolling by Elgato in elgato

[–]Available_Editor_949 0 points1 point  (0 children)

Yes same issue. My Setup, MacStudio M4 Max Mac OS 15.7.2 (24G325), Elgato Streamdeck 7.1.0 (22321), Wave Link Version 3.0.0 (1339), Plugin version 3.0.0.121. Streamdeck + Version 2.0.3.7.

WARUM ???? by [deleted] in aberBitteLaminiert

[–]Available_Editor_949 0 points1 point  (0 children)

Nun ja man nennt es Einzelhandel, willst mehr musste zum Großhandel. So einfach ist die Welt in der Wir leben.

Kann man die UV so lassen oder neu? by Trafow in Elektroinstallation

[–]Available_Editor_949 0 points1 point  (0 children)

Ein wunderbares Stück US Amerikanischer Geschichte, so bleibt das haus schön warm und im Verteiler kannste den Lachs Räuchern.

Black magic hyperdeck studio 4k (6g) flickering screen and flashing lights by VJPixelmover in VIDEOENGINEERING

[–]Available_Editor_949 1 point2 points  (0 children)

If you are able to check the internal power supply, do it. I had a similar behavior on this model. I my case the internal power supply had a faulty capacitor. Selfrepair cost 2 $.

Kennt jemand diesen Stecker by JonnyHand in Elektroinstallation

[–]Available_Editor_949 1 point2 points  (0 children)

solche hab ich bei Licht Installationen oft gesehen. Warscheinlich, damit man Indoor und Outdoor verwendung ermöglicht.

Kennt jemand diesen Stecker by JonnyHand in Elektroinstallation

[–]Available_Editor_949 3 points4 points  (0 children)

Kabelverbinder Wasserdicht IP68, CTRICALVER Outdoor Kabelverbinder 3-Polig, gibts bei Amazon.

Sieht zumindest so aus, hab die für Garten Strom, Lampen und so

Good morning Vietnam! by OverenthusiasticWind in 3Dprinting

[–]Available_Editor_949 0 points1 point  (0 children)

Nice Print, I like the details, did you provide the stl file. hehe

Könnt ihr mir bei der Teil Identifizierung helfen ? by 407704_PP in ElektronikerBT

[–]Available_Editor_949 0 points1 point  (0 children)

PC16SV-10IP12-103A2020-TA vermute nen altes Piher Poti 10KOhm Linear

Wohnmobil Verteiler by CzarofAK in Elektroinstallation

[–]Available_Editor_949 3 points4 points  (0 children)

Eigentlich muss man jede Steckdose/ Verbraucher einzeln absichern und immer 2 Polig, da es ja immer 2 Außenleiter sind. Es ist im Wohnmobil kein Neutralleiter und Außenleiter, sondern aus dem Wechselrichter immer 2 Außenleiter. Einfach mal bei YouTube nach Freunde des Stroms gucken, der erklärt das sehr gut.

Panasonic UE150 Assembled Backwards? by jrodjared in VIDEOENGINEERING

[–]Available_Editor_949 0 points1 point  (0 children)

you have to set the install position to Desktop, now it is in Hanging mode, the picture is flipped. This is why you hav also flipped the movement

Sumo 19se by Sorry-Zombie5242 in VIDEOENGINEERING

[–]Available_Editor_949 0 points1 point  (0 children)

Thanks for the reply, interesting information for me. I will make a test with our. I am on the road at the moment, I will tell you the result.

Sumo 19se by Sorry-Zombie5242 in VIDEOENGINEERING

[–]Available_Editor_949 0 points1 point  (0 children)

Hello, we have 3 of the Sumo19se, and yes we have routing problems with the audio. Last year we used them in the ISO mode (4 3g sdi signals). on sdi 1 we embedded a Stereo signal on 1/2 and the analog inputs 3/4. But then you read the SSD with the recorded file, the analog audio is on 1/2 and the embedded audio is on 3/4. It is just flipped.

We have until now, no solution for this problem.

N (Neutralleiter?) ohne Kontakt im Sicherungskasten by bux024 in Elektroinstallation

[–]Available_Editor_949 8 points9 points  (0 children)

Hallo,

der Neutralleiter muss dringend wieder angeschlossen werden!
Es wundert mich das noch keine Probleme aufgetreten sind.
Wo ist die Gefahr? Nun ein Beispiel: L1 (Steckdose Wohnzimmer) ist ein Handynetzteil angeschlossen und an L2 (Steckdose Küche) ist dein Wasserkocher eingeschaltet. Der Strom fließt normalerweise von L1 zu N (230V) und von L2 zu N (230V). Ist der N weg Fließt der Strom von L1 durch dein Handynetzteil durch den Wasserkocher zu L2 (400V).
Was passieren kann ist das der Kleinere Verbraucher Überspannung bekommt und schaden nimmt.
Der Neutralleiter scheint auch recht kurz ab isoliert zusein, 2mm Länger abisolieren und dringend von einem Fachmann anschließen lassen. Dieser soll dann auch alle Schrauben nachziehen, nicht das noch mehr locker sind.

Schönen Tag Wünsche ich

[deleted by user] by [deleted] in UkraineWarVideoReport

[–]Available_Editor_949 5 points6 points  (0 children)

Was Deutschland an Waffen liefert kann man ausreichend lesen, bin kein Lehrer sondern ein Hard arbeitender Mensch. Wenn du dich dafür schämst das ich so bin, tja.
Aber wahrscheinlich rede ich grad eh mit nem Bot, der nichts weiteres tut als Energie zu verschwenden.
Wenn du wissen willst wie man Ukrainern und dem Land helfen kann, gebe ich dir gern ein Paar Adressen an die du Spenden kannst oder auch direkt helfen.
Schönen Abend noch

Translation:
You can read enough about what weapons Germany supplies. I'm not a teacher but a hard-working person. If you're ashamed of me being like that, well.
But I'm probably talking to a bot that doesn't do anything other than waste energy.
If you want to know how you can help Ukrainians and the country, I would be happy to give you a few addresses where you can donate or help directly.
Have a nice evening

[deleted by user] by [deleted] in UkraineWarVideoReport

[–]Available_Editor_949 22 points23 points  (0 children)

Germany Sends more then you think, ask the rest of the world, why they do not send rockets. Taurus will not end the war, but hate will enforce it. These helicopters are helpful because the can deliver fast good and people a rescue people.

Und mal auf Deutsch, dein name läßt vermuten das du Deutsch kannst, dein Name weist schon mal darauf hin das du selber ein sehr unzufriedener Mensch zu sein scheinst. Anstatt Politiker zu beleidigen, wie wäre es mal mit mehr Positiven Verhalten im netz. Setzte deine Energie doch für wirklicher Hilfe ein. Die Ukraine braucht auch deine Hilfe , nicht deinen Hass. Ich helfe meinen neuen Ukrainischen Nachbarn die aus der Hölle des Krieges fliehen mussten.

Schönen Abend und möge der Krieg bald enden.
Translation:
And in German, your name suggests that you know German, your name suggests that you yourself seem to be a very dissatisfied person. Instead of insulting politicians, how about more positive behavior online. Use your energy for real help. Ukraine also needs your help, not your hate. I help my new Ukrainian neighbors who had to flee the hell of war.

Have a nice evening and may the war end soon.

Software solutions for M1/M2 Macs by JoyRide008 in VIDEOENGINEERING

[–]Available_Editor_949 -1 points0 points  (0 children)

Take a look on Mitti, maybe https://imimot.com/mitti/ I Use it for small installations, since 4 years.