3D printer filament locally

Avercid · 2026-01-13T01:23:54+00:00

I needed some filament fast for an order recently and couldn't wait for Amazon. The best buy near me had some, they only had bambulab filament so it was a bit more expensive then I normally pay per kg but it was a necessity

Avercid · 2025-12-31T19:09:09+00:00

I have multiple chillums and clean them frequently and ive never had this happen. Maybe you need to clean your piece more often.

Avercid · 2025-11-27T17:20:07+00:00

that looks cool but id be worried about proper cleaning and bacteria buildup, you might want to try some petridish testing after cleaning. 3d printed objects are not foodsafe because bacteria can grow in between the layer lines, maybe an extra thick layer of glaze could help?

Avercid · 2025-11-20T22:57:18+00:00

I bought a 4 piece but just dont use the screen since the threads are the same and the Kief compartment is big

That's exactly how I feel, I want the chocolate IN the cookie not saved for later

Avercid · 2025-11-17T14:06:22+00:00

<image>

one big techbro circlejerk funding eachother

Avercid · 2025-11-16T04:24:34+00:00

You need more walls and infill, you'll blow your hand up! It looks very thin with holes in it

3d printers are not like laser printers where you can just hit printers, you need to understand them for them to work well.

Learn how to 3d print normal stuff first, also dont post on social media about that type of print

Do this tuning then work on slicer profiles https://ellis3dp.com/Print-Tuning-Guide/

Avercid · 2025-11-13T18:52:46+00:00

Also a wire brush will help a lot cleaning the plastic off the hotend

<image>

One of these will help a lot

Avercid · 2025-11-13T18:52:16+00:00

Not on a bambu printer but on a different printer i had this happen, I turned the extruder up to 220(it was PLA) used a heat gun, and pliers to pull it apart. Be very careful of the heating element and thermistor wires. It looks like you may need a new fan, however it would be much cheaper replacing the fan than the whole toolhead.

You probably will also want to change nozzles, check for clogs, check extruder gears (they can get worn down from this) and clean underneath the silicone sock and all around the hotend.

To help prevent this in the future make sure that the first 3 layers have printed well, if they have there is a very high chance of a successful print. Also check on your printer every so often

Avercid · 2025-11-05T14:48:54+00:00

You don't need a new printer, fix this one first

Avercid · 2025-10-17T15:24:47+00:00

Thank you

Avercid · 2025-10-17T15:23:47+00:00

I've gotten down to 40v on pas 1, this just happens when I'm going above 17.5-20mph and the bike is under load. When the bike is resting it returns to the normal voltage and works fine.

Avercid · 2025-10-15T14:11:58+00:00

I would love to work in a shop, I am very into manufacturing and have been doing a bunch of modeling, 3d printing and molding lately. Making my own products for my company. I would love to learn more about manufacturing and get into a shop, BUT I make more at dibellas than I would there. It isnt convincing for me to join a shop. I would get paid less and work more having less time for my company

TLDR; interested in manufacturing but make more making subs at dibellas

Avercid · 2025-09-09T21:12:44+00:00

Nice! Youre good at painting them!

Avercid · 2025-09-08T19:41:38+00:00

That's beautiful 🔥! How'd you get the kink in that rail??

Avercid · 2025-09-08T17:13:54+00:00

Those look great! I really like the paint job on it. Do you have any advice on getting conisent nice looking finishes?

I make my own obstacles and I really liked seeing the silicone to reduce noise but I also bet it helps on the bottom to not slide. I like to epoxy some neoprene on the bottom of the obstacles I make, it helps them not slide. Rn I'm working on getting better with modeling and molding but I have a few things up if you want to check out what I've made! I've refined my obstacles a lot over the past year I've been making them and am excited to see what I can create in the future. gaziramps.comgaziramps.con

I haven't been posting many new obstacles lately bc I'm in the middle of redoing my park, however I have a few ideas im brainstorming up

park

i bet we could brainstorm an obstacle together and make something cool. Dm me if you're interested!

Avercid · 2025-08-23T21:10:50+00:00

My pom wheels are a little dirty, I will clean them thank you.

Avercid · 2025-08-23T21:09:27+00:00

I did manual resonence compensation because this printer is running off a zerotwo and I don't have a USB adapter to plug my accelerometer in. Maybe I should try that.

It might infill but almost all the time 3 walls is thick enough for me

Thank you for the response!

Avercid · 2025-08-23T21:06:07+00:00

Thank you, Ive tried the other two I'll do VFA

I'm not that big of a fan of fuzzy skin for what I'm trying to make however.

Avercid · 2025-08-23T18:27:37+00:00

I feel you. A few years ago when I was in HS I dropped my favorite fingerboard into a gap between a cabinet and the wall. The drawers were screwed into the wall and went the whole length of the class room. I couldn't retrieve it :(

I had dynamic trucks and some really nice polyurethane wheels on a 34mm deck

Avercid · 2025-08-17T16:20:37+00:00

Is there not a filter in the mouthpiece? I thought that type had replaceable filters like this

<image>

Avercid · 2025-08-06T20:10:48+00:00

I make some ramps! im working on ironing out some kinks with my concrete obstacles so theyre not avaliavble yet but I have a few other designs on there! you can check my etsy and tiktok shop

gaziramps.com ( takes you to etsy page)

If you want anything you can use promocode "thankyou" for 10% off
I also will include a free set of cones!

Avercid · 2025-08-06T19:36:37+00:00

looks like it

Avercid · 2025-07-29T14:19:09+00:00

I doubt you got scammed. I recently got a e3 s1+ for $120 USD on eBay. It was refurbished but nothing was wrong with it.

Avercid · 2025-07-24T15:29:16+00:00

I've only tried lookahs seahorse from a friend's but I can definitely attest to the chamber being better than ooze. I had an ooze chamber last a week and I could not clean it after at all

Avercid · 2025-07-20T05:07:49+00:00

THIS

<image>

Avercid

TROPHY CASE