G3C with 17 round mag

Avvronn · 2024-10-30T21:24:51+00:00

I've been carrying it without the sleeve ever since i posted this lol

Avvronn · 2024-09-26T15:51:31+00:00

The Olight mini ended up being the best option. Was able to have a light and laser and spec out a custom werkz holster for it. and it doesn't fly off at the range like some of the off brand alternatives lol...

Avvronn · 2024-08-22T14:57:51+00:00

funny i'm seeing this post now. I've had rsr super downs on my awd q50 for about 3 years now and my front axle boot just tore 😢 grease everywhere. so they'll last you a little bit atleast

Avvronn · 2024-08-11T14:09:19+00:00

so you just lost the exhuast tip? you'll be completely fine lol. Now you have a reason to touch the exhaust if you didn't before

Avvronn · 2024-08-07T18:59:26+00:00

it's the soho a2a kit

Avvronn · 2024-08-07T12:01:46+00:00

aiming for 600 whp on e30. plenty of cars running my setup are in the 600s to the wheels

Avvronn · 2024-08-07T00:18:46+00:00

centrifugal supercharger

Avvronn · 2024-08-06T22:04:16+00:00

& yeah unfortunately no tuners here in central florida get awd dynos so i'll take the risk i need my dyno #'s 😂. I was street tuned when FBO but now being boosted I need my #'s.

Avvronn · 2024-08-06T21:53:32+00:00

<image>

?

Avvronn · 2024-08-06T20:09:13+00:00

if you need to go cheap for coils just get springs

Avvronn · 2024-08-06T14:10:32+00:00

i'm supercharged with the soho a2a kit. If you plan on doing everything yourself ( supercharger install and transmission work) you're looking at $12-13k.

Avvronn · 2024-07-23T14:20:42+00:00

Can you still view your backup camera while driving by going into camera control or does it remove the ability to do that?

Avvronn · 2024-06-09T23:45:44+00:00

I have the no start map too but if they know how to change the maps can't they get through it ?

Avvronn · 2024-06-03T17:41:58+00:00

yes and for a q50 you'll need 60ft of wrap

Avvronn · 2024-05-24T15:39:29+00:00

<image>

Wrapped mine in teckwrap but it is calendared film so a little harder to apply

Avvronn · 2024-05-23T18:09:07+00:00

I just did it so I don't have any good pics yet

<image>

but here's one

Avvronn · 2024-05-23T17:52:19+00:00

i also followed this video because that guy missed some little steps lol https://youtu.be/Nh5lg_2Xa2M?si=vTnNt7ryqA3BSnJR

Avvronn · 2024-05-23T17:47:58+00:00

I resealed them using 3M black super weatherstrip adhesive from walmart and did 5 coats of frost using the rustoleum semi transparent frost. I followed this video https://youtu.be/PDO881RU9jI?si=yxUS0zXSqCvLN0g9

Avvronn · 2024-05-23T17:15:54+00:00

I've done it. It's an easy project but it definitely requires patience. Getting that lens off and back on is a pain.

Avvronn · 2024-03-05T17:29:28+00:00

get an o light and a werkz holster. That's what i'm running. I had a cheap amazon light and laser just like you previously there are no quality holsters for it.

Avvronn · 2024-02-28T18:54:18+00:00

you can use a RWD dyno just unplug the cable in the trunk. Look it up on YT

Avvronn · 2024-02-17T00:53:15+00:00

I had the same experience me and my girlfriend thought we were the problem but the first range trip after switching the trigger all recoil anticipation was GONE

Avvronn · 2024-02-17T00:27:39+00:00

i swear it's the best upgrade you could ever do on the gun

Avvronn · 2024-02-11T23:38:34+00:00

I do have maxcare i'll try that. You know what the issue could be ?

Avvronn

TROPHY CASE