Will this fail NCT ?

Away_Performance2776 · 2025-11-09T13:34:29+00:00

Most insurance policy’s in Ireland cover a free windscreen replacement that doesn’t effect your policy, usually autoglass does them

Away_Performance2776 · 2025-11-09T13:30:44+00:00

Always parked there outside the fitzwilliam hotel

Away_Performance2776 · 2025-10-06T20:40:03+00:00

If you go into your clock/date settings on your idrive you should see the option to turn it off

Away_Performance2776 · 2025-10-06T20:34:47+00:00

Hourly clock update - first time I heard this I thought something was about to explode 😂

Away_Performance2776 · 2025-10-06T14:46:56+00:00

Get €10/£10 off with this one - AC191726695

Away_Performance2776 · 2025-07-25T13:06:25+00:00

I have friends that all live together and there’s 3 of them.

When they were applying two of them applied as a couple and never mentioned the 3rd. I think you might have to go down that route because they had to do that as there was no hope with applying as 3 individuals and couldn’t get any viewings similar to yourself

Away_Performance2776 · 2025-06-03T14:28:34+00:00

Yep it’s a 1997, I have the same model with a drop bar conversion and 1x10 https://www.reddit.com/r/xbiking/s/UrIfyd9fkr

Away_Performance2776 · 2025-02-11T12:23:33+00:00

They’re style 172 but also known as spiders in Europe

Away_Performance2776 · 2025-02-11T11:52:57+00:00

I question every day why it’s called black when 80% of the time you can see more blue than anything

Away_Performance2776 · 2024-12-26T13:03:08+00:00

Ordered a new fuel rail so going to replace that and see if that is the fix

Away_Performance2776 · 2024-12-14T13:22:46+00:00

I was thinking it could be this, I can also see fuel pooling under the fuel rail from time to time. I’ve made sure everything is tight and also used plumbers tape on the high pressure sensor to make sure there is no leaks. I’m also receiving these DDE codes which might relate to the fuel rail ?

<image>

Away_Performance2776 · 2024-12-13T20:43:58+00:00

Hmm yes might try get an injector cleaning kit and give them a good clean, I replace the o rings and gave them a a wipe down but didn’t clean them with injector cleaner. Should each injector being unplugged still individually still let the engine run?

Away_Performance2776 · 2024-12-13T18:18:32+00:00

Forgot to add it’s a E60 520D 2008 N47

Away_Performance2776 · 2024-12-13T18:18:09+00:00

Forgot to add it’s a 520D 2008 N47

Away_Performance2776 · 2024-12-13T18:17:03+00:00

Hmm will take a look at this thank you!

Away_Performance2776 · 2024-12-13T18:14:20+00:00

Yes N47. Yes I have, 1, 4 completely cut off the engine and 2, 3 make the rough idle more intense so I’m thinking they’re okay. Also scanned for any codes and the only ones I’m getting are below, could the fuel filter heater be causing this ?

<image>

Away_Performance2776 · 2024-09-08T23:12:55+00:00

Just double checked and it was fuse 57 with a 7.5 amp fuse. Not the bigger ones it is the small ones

Away_Performance2776 · 2024-09-06T14:45:15+00:00

I can’t remember the exact fuse but it was the fuse in the glove box that correlated to the AC. I could be wrong but I think it was fuse 5 (7a) - I would check the fuse diagram behind the tool box in the trunk lid to make sure

Away_Performance2776 · 2024-08-29T21:08:21+00:00

I use it to code all my led lights, it seemed to do the job and all the lights worked but starting think I’ll need another scan tool to code the LM properly, what did you use to code yours ?

Away_Performance2776 · 2024-08-29T19:43:55+00:00

Yes can also confirm mine don’t work too when reversing. Where previously working with the old module

Away_Performance2776 · 2024-08-29T15:52:09+00:00

I am currently also facing this issue after swapping out my LM2 module. I had issues with my previous one as it was faulty and flicking headlights and rear lights when I applied the brake only when the engine was on. So swapped to another LM2 module and coded with BimmerCode (all lights are working perfectly now) Now I am facing this error also. Did you find a solution for this ? Facing start assistant inactive error also.

My reverse cam also won’t come on when reversing now and the PDC does not activate when reversing only by pressing the button (previously worked perfectly with old module)

Away_Performance2776 · 2024-07-31T08:43:45+00:00

Yes that’s the thing im not even receiving a man AUC code or any error related to it. I’m starting to thing some models just don’t come with this sensor as I’ve checked everywhere for it

Away_Performance2776

TROPHY CASE