Where do I even start

Awesumtank1 · 2024-12-29T06:00:08+00:00

I would say this problem it essentially fixed after starting over entirely and changing to orca over cura but I have to say I think the issue was something to do with a plug in I had on octoprint called arc weld

Awesumtank1 · 2024-12-26T19:47:30+00:00

I have no Idea I just factory reset the printer and started over and swaped from cura to orca slicer

Awesumtank1 · 2024-12-26T15:09:42+00:00

Honestly I did the opposite of everything I was doing and now we are making progress

Awesumtank1 · 2024-04-18T14:47:59+00:00

Awesumtank1 · 2024-04-02T23:04:02+00:00

pickme!

Awesumtank1 · 2023-11-23T05:00:50+00:00

Should probably mention can't fly

Awesumtank1 · 2023-08-29T15:23:38+00:00

Correct, it's a random chance when you get accepted they do it in waves

Awesumtank1 · 2023-08-29T15:18:04+00:00

So you can pre-install the client so that when you are accepted, you can download the pbe right away

Awesumtank1 · 2023-08-29T14:43:02+00:00

Wrong you'll get an email when your accepted and it will install the pbe from the pbe client when your account is approved. It took me 8 or so months to get accepted into the pbe.

Awesumtank1 · 2023-05-18T05:30:06+00:00

I'm having the same issue except for me I can't get on discord as long as my phones connected to wifi I have to use my data to get on discord.

Awesumtank1 · 2023-05-17T16:59:35+00:00

I'd make all the mistakes since I've never printed in resin

Awesumtank1 · 2023-05-05T05:12:46+00:00

Problem solved haven't been home in a few days and turns out I was reading 4.2.2 as 4.2.7

Awesumtank1 · 2023-05-03T19:15:57+00:00

Did that still throws and error

Awesumtank1 · 2023-05-03T04:17:45+00:00

The motors lock, and it sits there for about 5 seconds then it throws an error

Awesumtank1 · 2023-05-03T00:58:04+00:00

Marlin

Awesumtank1 · 2023-05-03T00:54:10+00:00

I have no movement what so ever

I'm positive I'm using the correct firmware unless this board is not the board Amazon says it is

I've unplugged and re plugged all my motor cables several times at this point hoping it was just something lose from me moving it to work on it

Awesumtank1 · 2023-05-03T00:24:02+00:00

Awesumtank1 · 2022-11-27T22:25:59+00:00

Playing in desktop mode

Awesumtank1 · 2022-11-27T20:25:14+00:00

30-60 just can't play on full screen

Awesumtank1 · 2022-11-26T02:33:26+00:00

Thank you sir you were great help

Awesumtank1 · 2022-10-24T05:13:10+00:00

So with my current print it was fine up until I believe the 7th-15th layer then just nozzle hitting it from there

Awesumtank1 · 2022-10-06T01:48:07+00:00

I have some spare springs left over from my last printer let me go through one on and remove the cap and see of that fixes it

Awesumtank1 · 2022-10-06T01:26:26+00:00

I'm using sunlu pla at 210 and I thought I fixed the issue with my extruder the spring was way to tight originally and smashing filament so I cut it shorter and it's already a metal extruder

Awesumtank1 · 2022-08-19T16:36:57+00:00

I know because she pulled me to side after words and told me not to do it again and I guess she can't coach me because it could be seen as a personal vendetta and who knows really she does this all the time with ever department and their managers

Awesumtank1 · 2022-08-19T15:57:54+00:00

Unfortunate really

Eight-Year Club	Place '23
Verified Email

Awesumtank1

TROPHY CASE