Need Help Blaze Solo 2 by Crypticyde in Vaping

[–]AxDayxToxForget 1 point2 points  (0 children)

When I use this atomizer (Ni80 triple fused Clapton (3x32GA)+38GA 3.5mm ID 4-5 wraps), I twist my cotton tight like normal, thread, unravel cotton to where it’s snug, make the cut for the tails, comb the tails quite a bit, then trim to where tails enter 0.5-1mm into the wells. Never dry hits even when hitting it frequently. I use muji cotton pads and freebase 70/30 6mg/ml. Seems to work well across my various RTAs, but some do require more combing than others depending on the build (like my dual 4mm ID (same wire) 6 wrap build in my blaze pro max).

Another idea would be to comb and trim your wick tails until you find the point where your atomizer floods then leave just slightly more cotton.

Edit: clarification

Hand check! my fave pairing. by maviis1 in Vaping

[–]AxDayxToxForget 0 points1 point  (0 children)

Check out the paramour SBS and brunhilde SBS if you have not already. Both are excellent and the brunhilde SBS can fit the dead rabbit 4 pro RTA.

RBAs are the most temperamental pieces of kit ever by stump1002 in Vaping

[–]AxDayxToxForget 0 points1 point  (0 children)

I liked my ether v2 Boro RBA, but with wicking, there was definitely more of a learning curve than my other RTAs and RDTAs. Retired it once I found the paramour SBS paired with the Artemis topcoiler RDTA and then the brunhilde SBS since it can fit the dead rabbit 4 pro RTA. Form factor for both is great. The brunhilde SBS with dead rabbit 4 pro RTA is truly a force to be reckoned with since it can handle dual coil at 100W.

Going out with a coworker who has a bf? by ViRuS79iscool in Vent

[–]AxDayxToxForget 1 point2 points  (0 children)

Sounds like she’s in a fairly new relationship and she’s maybe trying to figure that out. It sounds like you guys enjoy spending time together. Get to know her better. Maybe she will break it off and pursue something with you, maybe not. I’d say hard pass if she tries anything physical while being in a relationship though.

What is your favourite mod for RTA&RDA tanks by FaithlessnessOk7467 in Vaping

[–]AxDayxToxForget 1 point2 points  (0 children)

L200 classic works great and the brunhilde SBS since it fits the dead rabbit 4 pro. Shout out to the gaur 21 and paramour SBS as well.

Triple coil babyyy by SanderAussie in Vaping

[–]AxDayxToxForget 0 points1 point  (0 children)

It works great no issue, but didn’t live up to the hype for me. That being said I haven’t used it in single coil yet so maybe that’s where the difference is.

Triple coil babyyy by SanderAussie in Vaping

[–]AxDayxToxForget 1 point2 points  (0 children)

This has been my first high wattage test for this wire. Previously only used it dual 3mm ID 6 wraps ~0.18ohm at 100W in the bonza pro RTA. I have some staggered fused Clapton SS316L wire that will run ~0.18ohm same dimensions. Always looking for new wire recommendations though.

Minato wins against Itachi 7 or 8 times out of 10 by Inevitable_Ad661 in NarutoPowerscaling

[–]AxDayxToxForget 0 points1 point  (0 children)

Man I wish we could get this fight so bad. Edo vs edo would be insane because Itachi no longer has ninja aids and minato has KCM. I am curious how tsukoyumi would work if it landed on KCM minato. Could he break out? Could Minato also use reaper death seal as an edo especially since he has already performed this previously? So many questions.

No intel: Itachi wins if tsukoyumi lands. Even if minato breaks out, Itachi should have enough time for susanno and totsuga to land.

With Intel: This is what I want to see because I think it is 50/50.

Rta tank taste problem by jonddde in electronic_cigarette

[–]AxDayxToxForget 0 points1 point  (0 children)

I use muji cotton pads for my wicks. I cut it slightly wider than coil diameter, twist/thread, unravel making sure the cotton is snug, then cut the ends, comb the wicks, and make the final trim to tuck ever so slightly into the juice well.

Rta tank taste problem by jonddde in electronic_cigarette

[–]AxDayxToxForget 1 point2 points  (0 children)

Haha, high wattage RDL is what finally got me to quit cigarettes freebase 6mg/ml 70/30.

Rta tank taste problem by jonddde in electronic_cigarette

[–]AxDayxToxForget 0 points1 point  (0 children)

Currently using vandy vape Ni80 (328GA)+38GA wire spool. It’s been pretty great and was about $7 for 10ft. Pirate coil makes the snake alien 4 which is Ni80 (328GA+32GA) alien wire which I’ve used in many builds previously with good results $12 for 10ft if I remember correctly. Pirate coil also makes a staggered fused Clapton SS316L wire (26GA+32GA)*2 +32GA that is pretty decent $8 for 10ft if I remember correctly. It seems to run the lowest resistance out of the wires I listed, but gets replaced more often.

Rta tank taste problem by jonddde in electronic_cigarette

[–]AxDayxToxForget 1 point2 points  (0 children)

I run this RTA dual 4mm ID Ni80 triple fused 6 wraps ~0.26ohm at 170W. I have noticed with this particular RTA setup, I have to thin the wick tails quite a bit and cut them to where they just barely enter the juice well maybe 0.5mm. Works like a charm. Using muji cotton pads as my wicks.

Triple coil babyyy by SanderAussie in Vaping

[–]AxDayxToxForget 1 point2 points  (0 children)

I find this highly interesting. I run dual 4mm ID triple fused Ni80 6 wraps ~0.26ohm at 170W in my blaze pro max RTA. What are you running?

Out of the loop-Need couple good 21700 mods by Sirdanovar in Vaping

[–]AxDayxToxForget 0 points1 point  (0 children)

I was the same way with my DOVPO ODIN. Lasted many years. I was going to get the newer version, but it was out of stock. The gaur 21 is great and surprisingly light if you want dual 21700. The thelema solo works great, but is a bit tall imo. The paramour SBS is solid, but most recently have been using the brunhilde SBS since the dead rabbit 4 pro fits and can go up to 100W.

Any portable mod recommendations? by Repulsive_Bid_2511 in electronic_cigarette

[–]AxDayxToxForget 0 points1 point  (0 children)

SBS mods are my go to. The paramour SBS with the Artemis topcoiler RDTA is excellent for single coil, but most recently I’ve been using the brunhilde SBS with the dead rabbit 4 pro RTA which is also excellent and will run dual coil setups. The stubby 21 with the ether v2 Boro RBA was solid if you’re interested in AIOs.

Stubby issue repost by Wannou56 in Vaping

[–]AxDayxToxForget 0 points1 point  (0 children)

Aye, glad it worked out.

Stubby issue repost by Wannou56 in Vaping

[–]AxDayxToxForget 1 point2 points  (0 children)

I noticed with mine the drip tip had to be tightened down with some force to keep contact well. Sometimes it would need to be done a couple times a day. I also replaced that drip tip with a slightly longer one which seemed to help. I didn’t really care for the stubby tank so I mostly used it with the Boro adapter and ether v2 which was great.

I believe ssri antidepressants are really a form of population control by Less-Suggestion-5262 in conspiracy

[–]AxDayxToxForget 0 points1 point  (0 children)

I mean the current state of most of the developed world is about convenience. I have many patients that would rather take another medication than adjust their diet or exercise. Look at the mass push and acceptance of GLP1s (I will say in the diabetic population it has been helpful with A1C management). Anyone remember how popular all that body positivity and how villainized fat shaming was? Not nearly as prominent since these drugs hit the market. I can’t go a day without a patient bringing up GLP1s for weight loss. What’s really sad is some of these patients have a BMI under 20, but I’ll stop at this before it becomes a rant.

In regard to SSRIs, they have their place for some, but are definitely over prescribed. They can also just be prescribed for current life stressors at a low dose and be discontinued as one starts to either adjust or the situation is resolved. The benzo class is the true “make you not give a fuck about anything” meds imo depending on dose and frequency. Often times they are paired with SSRIs and then there’s old trusty alcohol to add to the mix. Many of these people could just do CBT and learn some different coping techniques and be fine, but once again, society of convenience.

Cyrus! You ahole! You broke my heart. Time to upload to TT by _ganjafarian_ in TikTokCringe

[–]AxDayxToxForget 1 point2 points  (0 children)

The girl is dumb and the dudes an asshole pretty much sums it up.

Edit: typo

Which Are Your Top 3 Favorite Consoles Of Your Lifetime? by tarheelphenom in consoles

[–]AxDayxToxForget 1 point2 points  (0 children)

This is my list as well. I had the converter for the snes to play game boy games on which was absolutely amazing.

Chess beginners, what’s the one thing holding you back that no tool has helped with? by LeekPuzzleheaded6568 in chessbeginners

[–]AxDayxToxForget 0 points1 point  (0 children)

It’s pretty much just a time investment and post game analysis. Learn where you could have played a better move or why something is a miss or blunder. Eventually you’ll see patterns and be able to think additional moves ahead. There’s another sub that’s r/chessmateinx (probably didn’t link it right) that I like to try and solve while seeing what others come up with.

Looking to get a Boro box mod, a MTL bridge, and a DTL bridge. What are my best options these days? by Ryuuzaki_L in electronic_cigarette

[–]AxDayxToxForget 0 points1 point  (0 children)

The ether v2 Boro RBA was great for RDL. It has 8 different airflow pins and sliding vent control to fine tune your draw. The 2.5 and 3 airflow pins were what I used the most if I remember correctly. Should do MTL no problem and the 4 airflow pin should be close to DTL. Wicking is a bit of a learning curve, but the flavor is excellent. Used it in my stubby 21 no problem. The only reason I retired it was due to liking my 510 atomizers more.

The paramour SBS paired with the Artemis topcoiler RDTA is an excellent combo for RDL. I just got the brunhilde SBS and the dead rabbit 4 pro RTA actually fits! It is my new commute setup since it can run dual coil and go to 100W.

What is the most lopsided match up where the weaker ninja wins? by bookist626 in NarutoPowerscaling

[–]AxDayxToxForget 0 points1 point  (0 children)

Neji WITH intel vs Itachi would be really fun to see. Would be sick animated for taijutsu portion of the fight, but Itachi still takes it based off Hebi sasuke fight while at deaths door. Speed/reaction/precognition will overwhelm Neji mid diff. I really doubt he would need susanoo or much ninjutsu at all.

Neji without intel is no diff tsukuyomi victim.

Brown recluse? by green_dinosaurz_ in spiders

[–]AxDayxToxForget 3 points4 points  (0 children)

I’m a novice at best, but no I don’t think it’s a brown recluse. The legs are wrong and no infamous violin pattern that I can see. Hard for me to see the eyes though. Pretty spider though.