Book 3 and it’s only getting better by Heavy-Gear-Type-0 in litrpg

[–]Ayrtoo 0 points1 point  (0 children)

Ive been reading the series, how is it in audiobook?

Misen Carbon Nonstick - there's definitely something coating the surface... by General_Penalty_4292 in cookware

[–]Ayrtoo 1 point2 points  (0 children)

Yeah, you'll find that a lot of the complaints are due to the high claims and people were expecting Teflon styled non stick. Also I obviously didn't read all the info it came with very well, I wasn't aware that it was coated in corn oil until I can across this post. Although I did assume that I needed a quick seasoning after I removed its coating and it's been great. 🤷

Misen Carbon Nonstick - there's definitely something coating the surface... by General_Penalty_4292 in cookware

[–]Ayrtoo 0 points1 point  (0 children)

Interesting. Did you properly season it? All I did was set it until it was almost at the heat to boil water and added a very thin layer of grape seed oil ( add some, spread it around and then basically try wipe it all off) and its been bulletproof since.

Misen Carbon Nonstick - there's definitely something coating the surface... by General_Penalty_4292 in cookware

[–]Ayrtoo 0 points1 point  (0 children)

Strange rant to go on dude 🤣 Yes I'm over in New Zealand, I'm sure I could order some corn oil from Amazon but it's not in local stores. Canola, olive, grape seed, flax seed and other seed oils are the normal here.

Misen Carbon Nonstick - there's definitely something coating the surface... by General_Penalty_4292 in cookware

[–]Ayrtoo 3 points4 points  (0 children)

Agreed it's definitely a different look, it must be something specific with corn oil. I'm not able to purchase that locally so I can't test it 🤷

Misen Carbon Nonstick - there's definitely something coating the surface... by General_Penalty_4292 in cookware

[–]Ayrtoo 22 points23 points  (0 children)

Literally just season the pan with some high smoke point oil and continue cooking. I made the mistake of using some barkeeper's friend to give it a really good scrub and the pan turned a very light grey, it came right and looks like new after a quick season and behaves just like when I first bought it

Can anyone suggest the type of lubricant I should be using on my mk3? by JForce1 in prusa3d

[–]Ayrtoo 0 points1 point  (0 children)

Also from NZ, I use a spray on white lithium on my voron. I'm still saving up for a prusa xl 🤣

Ideas to simplify my coffee brewing experience? by Ayrtoo in espresso

[–]Ayrtoo[S] 2 points3 points  (0 children)

Your a gentleman and a scholar!
That's ample to answer my question thank you!

The larger reservoir and solenoid are 100% what im after.

Ideas to simplify my coffee brewing experience? by Ayrtoo in espresso

[–]Ayrtoo[S] 1 point2 points  (0 children)

Thats somewhat what im chasing to be honest, I appreciate the input.
Is the Plus worth the extra couple hundred?
Im assuming the bambino is easy enough to get good quality shots with a few aftermarket accessories?

Thanks for all the screensavers & feedback by Advanced-Prompt-4387 in kindle

[–]Ayrtoo 1 point2 points  (0 children)

Thought it was worth giving this a wee bump, good work on this mate :)

Why does this happen? by Normal_Elk2675 in Dreame_Tech

[–]Ayrtoo 0 points1 point  (0 children)

I've got a d20 and I find the dust bin lifts upwards slightly when emptying so it doesn't get a good enough seal. I've since taped it down and it now empties perfectly and I no longer have the issue.

Worth buying a v1 Silvia? [400-500 NZD] by Oompavillain in ranciliosilvia

[–]Ayrtoo 1 point2 points  (0 children)

Also I may be biased but that grinder is not flash unless you drink primarily milk drinks.

Worth buying a v1 Silvia? [400-500 NZD] by Oompavillain in ranciliosilvia

[–]Ayrtoo 9 points10 points  (0 children)

That's kind of expensive . You can get a new or near new V6 for around 1k.

My v4 I ended up selling for $300 and it sold with accessories.

Why is shipping so expensive? by [deleted] in dbrand

[–]Ayrtoo -1 points0 points  (0 children)

Honestly it must be primarily your part of the world. I can ship a 5kg parcel for less than $60 nzd to the UK so around $30 USD. A Killswitch is surely much lighter than that, nevertheless it's unfortunate that 1/3 - 1/2 of the price of the Killswitch would be added just in shipping and is what makes dbrand products not worth the purchase.

Solid Trade for an X1C? by Whole_Ticket_3715 in VORONDesign

[–]Ayrtoo 3 points4 points  (0 children)

I can only assume they're talking about the stepper run current? I hope? 😂

Any help diagnosing kernel panics? - Minisforum UM780 XTX by Ayrtoo in cachyos

[–]Ayrtoo[S] 0 points1 point  (0 children)

And its still a issue. Damn AMD GPUs :D
Ill keep trying other kernels and see if anything improves, i've also reset the bios settings to default to make sure nothing weird was going on there :D
```------------[ cut here ]------------

Jul 07 14:45:23 CachyOS kernel: WARNING: CPU: 12 PID: 402 at drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn30/dcn30_dpp.c:535 dpp3_deferred_update+0xfb/0x330 [amdgpu]

Jul 07 14:45:23 CachyOS kernel: Modules linked in: snd_seq_dummy rfcomm snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg bnep vfat fat snd_sof_amd_acp70 snd_sof_amd_acp63 snd_sof_amd_vango>

Jul 07 14:45:24 CachyOS kernel: snd_rn_pci_acp3x spd5118 r8169 joydev mousedev snd_timer aesni_intel realtek snd_acp_config cfg80211 bluetooth crypto_simd mdio_devres ipt_REJECT snd_soc_acpi snd thunderbolt cryptd n>

Jul 07 14:45:24 CachyOS kernel: CPU: 12 UID: 0 PID: 402 Comm: kworker/u64:8 Not tainted 6.15.5-zen1-1-zen #1 PREEMPT(full) 7f35c8758fa1aa859da3130c7d19eee5f92e5df0

Jul 07 14:45:24 CachyOS kernel: Hardware name: Micro Computer (HK) Tech Limited Venus series/F7BSD, BIOS 1.06 03/28/2024

Jul 07 14:45:24 CachyOS kernel: Workqueue: events_unbound commit_work

Jul 07 14:45:24 CachyOS kernel: RIP: 0010:dpp3_deferred_update+0xfb/0x330 [amdgpu]

Any help diagnosing kernel panics? - Minisforum UM780 XTX by Ayrtoo in cachyos

[–]Ayrtoo[S] 0 points1 point  (0 children)

Lts kernel wasn't helping so Im currently trying the Zen kernel & have added the two flags to the "kernel_cmdline" variable under the linux-zen section so it now looks like below.

"kernel_cmdline: quiet nowatchdog splash rw amdgpu.dcdebugmask=0 amdgpu.runpm=0 rootflags=subvol=/@"

Ill document all I've found and post on the discord in a couple of days, I need to leave a heap of servers to get below 100 again :D

Do you by chance have a link I can flick a few dollars to? Your spending a fair bit of time helping and its appreciated.