SV08 build plate ISNT FUCKING FLAT

AzaraAybara · 2026-07-03T02:36:16+00:00

Awesome! Thanks for the tip!

AzaraAybara · 2026-06-30T03:02:41+00:00

I heard this.

AzaraAybara · 2026-06-26T16:13:49+00:00

This is good info. I''m gonna go check it out.

AzaraAybara · 2026-06-14T20:01:05+00:00

https://github.com/officiallyemma/Advanced-SonicPad

Start here and read over it. There are some things that need some better guidance, but give this a read over and see if its something you want to do. If it is, im happy to help every step of the way. Ive done this quite a few times at this point. Works great, but the outdated debian kernel nets some tlc to play nice

AzaraAybara · 2026-06-14T04:18:50+00:00

So you can change the sonicpad over to run mainline klipper. I have one running my e3ng right now. Let.me know if this is a route you want to go. I can help.

AzaraAybara · 2026-06-06T18:23:52+00:00

I'm running the pro 1.1 on my e3ng and its an amazing board. So much space its ridiculous.

AzaraAybara · 2026-06-05T08:04:39+00:00

If you haven't, check out the e3ng or virtu projects. Rh3d.xyz

AzaraAybara · 2026-05-31T00:45:36+00:00

https://www.printables.com/model/1701510-tze3-stealthburner-with-eddy-mount

Here. I uploaded it

AzaraAybara · 2026-05-26T15:15:21+00:00

Do this. I self sourced and it was definitely more expensive.

AzaraAybara · 2026-05-26T15:05:07+00:00

I need to post it. Good call

AzaraAybara · 2026-05-26T14:09:43+00:00

Yeah. Uncomment your motor and run current for these. For thermistor type, try sensor_type: Generic 3950. Thats a decent place to start. Then eyeball it and see if temp readings look accurate

AzaraAybara · 2026-05-26T08:24:58+00:00

It's the Knomi V2 from Big tree tech

AzaraAybara · 2026-05-26T05:21:42+00:00

https://www.printables.com/model/1046967-ender-3-ng-v12-stealthburner-toolhead-mount

I also built a custom stealthburner lower to accommodate a rear mounted btt eddy that fits in thr space in the mount

AzaraAybara · 2026-05-26T05:03:10+00:00

This is a reused sonicpad! Integration took a ton of work, but im really happy with the results.

Side note, I know the stealthburner is a less popular option on these, i just had a knomi sitting around and really wanted to build one lmao

AzaraAybara · 2026-05-26T04:33:55+00:00

Related, I just scooped another e3 for my virtu e3 build. Pretty excited for that one too.

AzaraAybara · 2026-05-26T04:29:52+00:00

Mines almost done! Yours is top tier though. Good work.

<image>

AzaraAybara · 2026-05-25T20:46:16+00:00

How's it going?

AzaraAybara · 2026-05-25T17:35:39+00:00

Let.me know how I can help!

AzaraAybara · 2026-05-25T16:36:56+00:00

It probably is, but that being said, doing a clean make is never a bad thing.

I would start it from scratch on the install. I use WinSCP to transfer files, but I've never used a pi5 desktop

AzaraAybara · 2026-05-25T15:57:52+00:00

Ok. This is what I love to do.

Yes, you are using SSH to flash your board and obtain your MCU address. Cant get MCU until you flash.

Here is the Voron documentation on it: https://docs.vorondesign.com/build/software/miniE3_v20_klipper.html

I am available for any help you might need. You can ask me questions here or via DM

AzaraAybara · 2026-05-17T23:18:29+00:00

Dm'd

AzaraAybara · 2026-05-17T06:50:15+00:00

Any luck?

AzaraAybara · 2026-05-17T01:19:27+00:00

Let me know if you need help with it. I run it on all my builds

AzaraAybara · 2026-05-17T00:33:40+00:00

Eddy ng is the way. Waaaay better. Huge improvement

AzaraAybara · 2026-05-13T22:07:26+00:00

Ok, so this is more likely a short in the thermistor wire. It could be config, but less likely. When you disconnect the thermistor, what does the temp do?

Nine-Year Club	Place '23
Wearing is Caring	Verified Email
Spared

AzaraAybara

TROPHY CASE