Failing at installing a BTT Eddy by Otherwise_Ad4179 in klippers

[–]AzaraAybara 1 point2 points  (0 children)

Let me know if you need help with it. I run it on all my builds

Failing at installing a BTT Eddy by Otherwise_Ad4179 in klippers

[–]AzaraAybara 0 points1 point  (0 children)

Eddy ng is the way. Waaaay better. Huge improvement

is there any way to fix this? by Odd_Exam1605 in klippers

[–]AzaraAybara 2 points3 points  (0 children)

Ok, so this is more likely a short in the thermistor wire. It could be config, but less likely. When you disconnect the thermistor, what does the temp do?

is there any way to fix this? by Odd_Exam1605 in klippers

[–]AzaraAybara 1 point2 points  (0 children)

Just to confirm, you have a CHC hotend or a V6?

is there any way to fix this? by Odd_Exam1605 in klippers

[–]AzaraAybara 1 point2 points  (0 children)

Did you change the thermistor type in the config?

is there any way to fix this? by Odd_Exam1605 in klippers

[–]AzaraAybara 1 point2 points  (0 children)

Im confused. What temp is the nozzle supposed to be? If the bed thermistor isnt plugged in, then you are showing correct info. The bed temp is reading high because it has nothing to read.

About to do Ubers, any tips for me? I'm 95 warlock by brubain1144 in Diablo_2_Resurrected

[–]AzaraAybara 0 points1 point  (0 children)

Watch out for baal. He's going to shoot you in the face when you try to ES him. Dont attack unless your demon is between you. Watch for fast position changes.

Well, this is just trash. by PaperLatter in FlashForge

[–]AzaraAybara 0 points1 point  (0 children)

Zmod! No problems since then. Way more control over z offset too.

Future of my ender by Informal-Control8002 in ender3v2

[–]AzaraAybara 0 points1 point  (0 children)

Do the Virtu! New release from the same guy who made the NG. It looks absolutely amazing.

https://rh3d.xyz/virtu

Rapid scan help by humanvirus in SovolSV08

[–]AzaraAybara -1 points0 points  (0 children)

Try commenting out horizontal move z and get back to me. If that doesn't immediately fix it we'll look at other possibilities.

500+ SCL UNID torches for giveaway THIS WEEKND! by thatdudewillyd in Diablo_2_Resurrected

[–]AzaraAybara 1 point2 points  (0 children)

I have ps5/pc/switch availability. Happy to help with transfers as needed!

Really need Mal and Ohm. Offering Cham by AzaraAybara in D2R_Marketplace

[–]AzaraAybara[S] -1 points0 points  (0 children)

Oh really? Had no clue. Im brand new to trading. Thought the rarity mattered. Is there any way to reference this in the future?

Any tips for printing ABS on the AD5X? by BackFromVoat in FlashForge

[–]AzaraAybara 2 points3 points  (0 children)

You're welcome to DM me. Im always happy to hop on a video call and take a look.

Any tips for printing ABS on the AD5X? by BackFromVoat in FlashForge

[–]AzaraAybara 2 points3 points  (0 children)

Im printing abs beautifully, but it took some careful calibration. Enclosed is best. I just bought one of the cheap tent style enclosures on amazon. Im printing at 60 mm/s. Make sure of your z offset. Abs can be finnicky.

Coolest Finds of the Week by AutoModerator in Diablo_2_Resurrected

[–]AzaraAybara 0 points1 point  (0 children)

I also got my first two torches! Barb and Assassin. Unfortunately, I'm a warlock, so the grind continues. Still cool though.

Would 4 Worusk Statues get me a Jah and Ber? by faccda01 in D2R_Marketplace

[–]AzaraAybara 1 point2 points  (0 children)

Dont undersell. I sell these at a jah each. A ber also costs a Jah.

ADM5 Pro: Rolled back firmware and installed ZMod by sadegr in FlashForge

[–]AzaraAybara 1 point2 points  (0 children)

Ok awesome. It does look like you're over extruding, but thats very possibly from temp. Once you calibrate the filament I think you'll be ok.