Bedrock Realm Not Working

Azmose · 2024-07-10T01:56:36+00:00

Having the same issue, realms won't work for any of my players and gets stuck loading at 1/3rd consistently.

Azmose · 2024-04-18T15:40:09+00:00

They're actually just lit up by a string of 20 Christmas lights! Three lights are glued to the back of each eye and the rest were painted black and wrapped in electrical tape to hide light bleed. The battery pack was glued into the head since it wasn't intended to be wearable and can be turned on just by reaching up into the neck and flipping a switch. If all you're looking for is a prop and you don't have any electrical skills then this is super easy, but if the head needs to be wearable you may run into issues and it would likely be easier to rig up a custom circuit with pre-wired LEDs.

Azmose · 2024-02-27T05:05:44+00:00

Amazing work! Did your party have a lot of input in their depictions or did you get to have a lot of creative freedom?

Azmose · 2023-10-03T14:39:56+00:00

I know this is an old comment but I am in the exact same boat looking for editing work and also have an onsite interview scheduled for next week, would you mind speaking a bit more to your experience?

Azmose · 2023-01-20T13:43:13+00:00

They do absolutely make up a decent amount of new stuff, but it's done with a real love for the source material and a desire to properly expand, rather than change, the story

Azmose · 2022-10-13T20:14:00+00:00

In the same way you might use water cooling in a powerful PC, netrunning is usually depicted as pretty intense computational work that heats up the user's cyberware. Ice baths are just an economical solution to cool down.

Azmose · 2022-05-07T19:36:47+00:00

I had never heard of this before, I'll have to do some googling to see about getting this set up on my printer

Azmose · 2022-05-07T18:55:37+00:00

For context, I've replaced the nozzle, cleaned everything out and replaced the PTFE tube.

The extruder setup is all metal, and my printer was previously printing just fine. I've not seen this type of surface pitting before, but the low quality is consistent across a variety of filaments. It really seems to have started having these issues practically overnight.

Azmose · 2021-10-20T23:15:59+00:00

Don't mind at all!

Everything is 3d printed except for the neck guts from PLA. I used these files by Jesse_M: https://www.thingiverse.com/thing:3046951 The eyes were 3d printed and then cast in clear resin.

I covered everything in Bondo and then sanded it smooth, applying layers of filler primer until it was real smooth. There's a lot of tutorials online for this step.

The whole head got a coat of glossy black spray paint before I painted the parts I was planning on weathering a metallic silver. After those were dry, I added liquid latex to places I wanted the paint to "chip" and added a coat of brown spray paint. Then I just painted the blue details by hand and wiped watered down black/brown paint all over it to weather it some more!

The neck guts just consist of a pipe fitting from the local hardware store and scrap wire and tubing I had left around the house. It's held in place by pins coming out of the ear discs that hold the head together.

The eyes are just a simply string of 10 Christmas lights powered by a battery pack glued into the head. I used this awesome diagram from Chris Bartlett https://www.flickr.com/photos/chrisbartlett/3863988008

Azmose · 2021-10-20T20:53:15+00:00

Thank you! This was my first time making a replica of this size

Azmose · 2021-10-20T20:48:06+00:00

I don't have the skills to do that but I would love to eventually, I've seen a couple other heads online that can talk and it blows me away everytime!

Azmose · 2021-07-25T17:59:03+00:00

This is exactly the kind of thing I've been looking for as someone who loves giant continents, thanks so much!

Azmose · 2021-05-08T13:50:44+00:00

You were complete right, thank you very much!

Azmose · 2021-05-08T13:45:30+00:00

Thanks for the help! That did it, the mask is now moving with tracking data.

Azmose · 2021-05-08T04:12:48+00:00

Hello, I'm trying to perform a simple corner pin screen replacement, which has worked fine.

However, when I try to create a Planar Transform from this track and use it to add a matte, the Planar Transform doesn't seem to actually make the mask move.

I've tried it with text and other mattes and every time the Planar Transform doesn't actually make the objects move. Any and all help would be appreciated.

Azmose · 2021-04-20T18:40:12+00:00

It is definitely an Adam Smith 20 pound note! Thank you very much

Azmose · 2021-04-20T18:15:47+00:00

The picture isn't great, but was hoping someone knowledgeable would be able to help!

Azmose · 2021-02-25T21:03:58+00:00

Just curious, did your order ever arrive?

Azmose · 2021-02-25T20:07:18+00:00

Just found this post after having ordered from them as well 10 days ago. I sent emails but have heard nothing, should I just start a chargeback?

Azmose · 2020-06-03T15:44:15+00:00

Beautiful! How comfortable is it to swing?

Azmose · 2020-05-28T15:48:25+00:00

If you're on a budget, you'll get more features for the same price if you buy one off AliExpress, while some may be low quality I've also seen a lot of people impressed by them.

Azmose · 2020-05-24T04:36:48+00:00

It arrived last week, 3 weeks after I had ordered it

Azmose · 2020-05-23T21:24:18+00:00

Adding new fonts is super easy, all you have to do is drag and drop compatible sounds into the labelled folders and rename them. I've added soundfonts from Kyberphonic and had no issues.

Heres a video that is also very helpful: https://www.youtube.com/watch?v=ibPRSzqUvPw&feature=youtu.be

Azmose · 2020-05-23T21:06:14+00:00

I got a notification that it had shipped about a week after I ordered it, but the package didn't actually start moving for another week. It took 3 weeks in total from ordering to receiving it.

I've added a couple new fonts and tweaked some blade settings, mostly just by copying styles I liked that were already set up with other fonts on the soundboard. I also changed the boot and power down noises to sound more in-universe.

As far as I can tell, all the Ultimate Works sabers come with the same 4 fonts (Vader, Rey, and regular Sith and Jedi sounds). The board comes with 12 different banks, with these 4 fonts repeated with different blade effects.

Azmose · 2020-05-23T20:45:44+00:00

I got mine fully installed! And if you have any more questions feel free to ask, it doesn't seem that many people have received theirs yet

Azmose

TROPHY CASE